• 한국전산유체공학회지
• /
• 제16권4호
• /
• pp.110-115
• /
• 2011

A modern optical fiber manufacturing process requires the sufficient cooling of glass fibers freshly drawn from the heated and softened silica preform in the furnace, since the inadequately cooled glass fibers are known to cause improper polymer resin coating on the fiber surface and to adversely affect the product quality of optical fibers. In order to greatly enhance the fiber cooling effectiveness at increasingly high fiber drawing speed, it is necessary to use a dedicated glass fiber cooling unit with helium gas injection between glass fiber drawing and coating processes. The present numerical study features a series of three-dimensional flow and heat transfer computations on the cooling gas and the fast moving glass fiber to analyze the cooling performance of glass fiber cooling unit, in which the helium is supplied through the discretely located rectangular injection holes. The air entrainment into the cooling unit at the fiber inlet is also included in the computational model and it is found to be critical in determining the helium purity in the cooling gas and the cooling effectiveness on glass fiber. The effects of fiber drawing speed and helium injection rate on the helium purity decrease by air entrainment and the glass fiber cooling are also investigated and discussed.

• 산업기술연구
• /
• 제30권A호
• /
• pp.59-68
• /
• 2010

This study intended to examine the changes of residential building characteristics in period classification. The results of this study are as follows: During Joseon dynasty, it is judged that the social changes in the ideology of ruling classes did not directly affect the traditional residential style. The mid period and latter period of Joseon, it is changed toward horizontal and practical residential layout in place of confucian courtesy based style. During port opening period, the traditional residential style was remodeled through addition of glass panes to inter-chamber floor in tune with the influx of modern materials and ideologies like glass or cement etc. The Japanese ruling era of Korea period, the modern housing style of room separation type was settled.

• 한국실내디자인학회논문집
• /
• 제13권6호
• /
• pp.12-19
• /
• 2004

Mies van der Rohe is still known as the architect whose influence is the largest among modem architects. As his work is typical of modern architecture, the architecture of Mies shows an interest in materials and techniques, even though It established the new architectural world by glass and iron, and only transparency is emphasized with glass. So it is blame for the loss of peculiarity a result of thinking In the way of sachlich with expression and structure of material and hierarchical relation. Vincent Scully has insist on that an appearance of modem architecture be occur not by simply a technical request of a technician but by reflection of the times and times' spirit. In this means, the works of Mies is the trial to express the new times' spirit that the new times order and an understanding of material properties about glass with new material of modern. For that, this study tries to consider that Mies'work is the new trial through reflection of material to express about the bstraction beyond the limit of sachlich expression, on the point of expresslonal characteristics of material shown in plan of the Barcelona Pavilion and skyscraper and on the basis of the theory of Gottfried Semper and Karl Boetticher that architectural surface Is a medium which can define space and also express mass.

• 보존과학회지
• /
• 제35권2호
• /
• pp.169-176
• /
• 2019

국립민속박물관에서 소장하고 있는 19세기 말~20세기 여성용 쓰개에 사용된 장식 19점에 대하여 SEM-EDS로 조성을 분석하였다. 쓰개 장식 16점은 융제 성분인 $Na_2O$와 PbO를 함유하고 있어 한국의 고대부터 출토되거나 전승되어온 납유리와 조성이 다른 유형의 납유리였다. 쓰개 장식 2점은 $Na_2O$와 $K_2O$가 3% 혹은 5% 이상 함유한 알칼리혼합유리, 1점은 CaO를 5% 이상 함유한 포타쉬유리 III형으로 분류되었다. 이 중 납유리는 일제강점기 조선에 수입된 일본의 공예용 납유리와 조성이 유사하여, 19세기 말~20세기 여성용 쓰개 중 납유리를 사용한 장식은 원료를 일본에서 수입하였거나 조선 내 일본인 기술로 생산한 공예용 납유리로 제작된 것으로 추정된다. 이를 통해 근현대에 들어서 전통적으로 사용되어온 쓰개 장식의 사용된 옥이나 호박과 같은 보석이 일본에서 수입된 공예용 납유리로 대체되어 새롭게 사용되었음을 보여주고 있다.

• 한국전산유체공학회지
• /
• 제15권4호
• /
• pp.92-98
• /
• 2010

In a modern high speed drawing process of optical fibers, it is necessary to use helium as a cooling gas in a glass fiber cooling unit in order to sufficiently cool down the fast moving glass fiber freshly drawn from the heated silica preform in the furnace. Since the air is entrained unavoidably when the glass fiber passes through the cooling unit, the helium is needed to be injected constantly into the cooling unit. The present numerical study investigates and analyzes the air entrainment using an axisymmetric geometry of glass fiber cooling unit. The effects of helium injection rate and direction on the air entrainment rate are discussed in terms of helium purity of cooling gas inside the cooling unit. For a given rate of helium injection, it is found that there exists a certain drawing speed that results in sudden increase in the air entrainment rate, which leads to the decreasing helium purity and therefore the cooling performance of the glass fiber cooling unit. Also, the helium injection in aiding direction is found to be more advantageous than the injection in opposing direction.

• 설비공학논문집
• /
• 제25권11호
• /
• pp.573-577
• /
• 2013

An external window directly affects the energy performance of its building. In modern well-insulated buildings, U-values for walls of 0.36 $W/m^2K$ or even lower can be realized. In such buildings, glazing with typical U-value of 2.1 $W/m^2K$ or higher creates thermal weak spots on the facade. The performance of the existing triple glass window has been limited to energy savings and condensation prevention. In this study, the performance of condensation prevention of a vacuum multi-layer glass was analyzed. The final conclusion through mock-up experiments is as follows. The surface temperature of the vacuum multi-layer glass was $2^{\circ}C$ higher, and the temperature difference ratio (TDR) was 0.07 lower, than the corresponding values of the triple glass.

• KIEAE Journal
• /
• 제4권2호
• /
• pp.11-18
• /
• 2004

Growing use of entire glass facades with metal frames are popularly witnessed in modern building practices and design competition as well. In spite of architectural aesthetics and view to outdoors, environmental issues still exist in that kind of buildings. One of the solutions for the problems might be the use of functional glasses such as a heat-resistant glass or various tinted glasses for the glass walls. This paper aims to provide performance data related to the impact of various transmittal materials of window systems on the light distribution. A series of computer simulation deals with the basic geometrical and optical design elements of a commonly used all-glass facades. Additionally an experimental configuration of the vertical window is proposed for better result of daylighting. A window system equipped with an inner-light shelf can improve the uniformity of natural light in a space by reducing the level of illumination near the window and redirecting light deeply into the space.

• Structural Engineering and Mechanics
• /
• 제60권5호
• /
• pp.781-794
• /
• 2016

Due to its relatively good safety performance and aesthetic benefits, laminated glass (LG) is increasingly being used as load-carrying members in modern buildings. This paper presents an experimental study into one applicational scenario of structural LG subjected to in-plane bending. The aim of the study is to reveal the in-plane behaviors of the LG beams made up of multi-layered glass sheets. The LG specimens respectively consisted of two, three and four plies of glass, bonded together by two prominent adhesives. A total of 26 tests were carried out. From these tests, the structural behaviors in terms of flexural stiffness, load resistance and post-breakage strength were studied in detail, whilst considering the influence of interlayer type, cross-sectional interlayer percentage and presence of shear forces. Based on the test results, analytical suggestions were made, failure modes were identified, corresponding failure mechanisms were discussed, and a rational engineering model was proposed to predict the post-breakage strength of the LG beams. The results obtained are expected to provide useful information for academic and engineering professionals in the analysis and design of LG beams bending in-plane.

• 건축역사연구
• /
• 제13권4호
• /
• pp.75-88
• /
• 2004

The German Werkbund, which was founded in 1907, played an important role in the history of modern architecture. Its exhibition 1914 in Cologne is estimated as a meaningful event in the development of modern architecture. Especially two examples, among which were built at that time, are worthy of notice. The one is the 'Modelfactory' by Walter Gropius and the other 'Glashaus' by Bruno Taut. Generally in the Textbook on the history of modern architecture, the Taut's Glashaus is rarely mentioned or described as a early example of some expressionistic architecture, while the Modelfactory by Gropius is regarded as an essential workpiece in the early stage of modern movement. the time of searching alternative not only from rationalistic modernism but also postmodernism and today in the time of plurality, Taut's Glashaus could bring us more interesting and meaningful aspects in architectural design. Through investigating the background in the planning stage and analysing the composition of space, construction, circulation etc. it is to try to understand the building as really as what it was. Furthermore, historical meanings of the building in the modern architecture is reinterpreted in the following aspects; what should be reflected in architecture and how could 'Zeitgeist' be architecturally adopted?

• 한국실내디자인학회논문집
• /
• 제14권4호
• /
• pp.3-10
• /
• 2005

German architect Hans Scharoun (1893-1972) has long been known as an Expressionist Architect, but recent scholarships reveal that his architectural pieces represent a profound idea of modern functional building. In this context, his architectural tendency can be constructed as an advanced functionalism. In the early twentieth century Germany, many young architects were not given chances to build due to economic hardship after World War I, and they were naturally led to imagery sketch designs for future architecture. Scharoun began with utopian fantasies as one might easily notice through his watercolor paintings in the Glass Chain period, but further developed his vision into a more concrete idea on organic building which he believed to be a modem functionalism. This paper intends to exemplify Scharoun's modern functionalism through a detailed analysis of his design of Weissenhofhaus presented at Stuttgart Deutscher Werkbund Exhibition in 1927. Weissenhofhaus is often rebuked for its expressionist qualifies by famous critics such as Sigfried Giedion and Nikolaus Pevsner, but the house also suggests other possibilities within the Modern Movement in Architecture. In particular, Weissenhofhaus is chosen for its historical importance linking two world war eras in German modern architecture.