• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1953-1955
• /
• 2002

An efficient automatic mesh generator suitable for the harsh model, which contains abrupt regions and thin layers, is implemented. It adopts two kinds of node placement scheme. In the beginning, the initial nodes on the boundary are generated automatically by an efficient boundary node generation scheme. And then the inner nodes are placed using nodal spacing value technique repeatedly from the initial mesh to final mesh. The effectiveness of the proposed technique is verified by a thin film micro-strip line modeling, where the final mesh contains no sliver elements.

• Proceedings of the KIEE Conference
• /
• 2002.11d
• /
• pp.320-322
• /
• 2002

The paper presents an electrical model of a grid-connected wind energy conversion system (WECS) with a variable speed drive, a fixed pitch angle, a synchronous generator as a wind generator and AC-DC-AC conversion scheme for simulating dynamic behaviors and performance responding to varying wind speed input. The electric output of the WECS is controlled by the AC-DC-AC conversion scheme, the objective of which is to capture the maximum active power under varying wind conditions and to keep the voltage of WECS terminal bus at a specific level. Aerodynamic models are used to incorporate the power characteristics to wind speed. The modeling and simulation of the WECS are realized on PSCAD/EMTDC environment.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.1 no.3
• /
• pp.95-108
• /
• 1993

The needs for smooth curves and surfaces are increasing in modeling cars, ships, airplanes, and other consumer products either for aesthetic or functional purpose. However, the curves and surfaces generated by conventional modeling methods usually exhibit an unwanted behavior due to digitizing errors or inadequate generation method, and thus much time and extra effort is spent afterwards to get the faired results. The objective of this work is to develop a fairing scheme by which well refined shape of a surface can be acquired with detecting and removing the shape imperfections of the given surface represented by NURBS. The fairing scheme is based on an optimization process in which the control points of the given surface are repositioned to minimize the integration of the jumps(perturbations) of the unit normal vectors at all surface points.

• Nuclear Engineering and Technology
• /
• v.36 no.4
• /
• pp.285-294
• /
• 2004

Pressure wave propagation in the discharge piping with a sparger submerged in a water pool, following the opening of a safety relief valve, is analyzed. To predict the pressure transient behavior, a RELAP5/MOD3 code is used. The applicability of the RELAP5 code and the adequacy of the present modeling scheme are confirmed by simulating the applicable experiment on a water hammer with voiding. As a base case, the modeling scheme was used to calculate the wave propagation inside a vertical pipe with sparger holes and submerged within a water pool. In addition, the effects on wave propagation of geometric factors, such as the loss coefficient, the pipe configuration, and the subdivision of sparger pipe, are investigated. The effects of inflow conditions, such as water slug inflow and the slow opening of a safety relief valve are also examined.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2003.06a
• /
• pp.73-78
• /
• 2003

This paper proposes the simulator synthesis scheme which is based on the exploration of the total design space in attributed AND-OR graph. Attributed AND-OR graph is a systematic design space representation formalism which enables to represent all the design space by decomposition rule and specialization rule. In addition, attributes attached to the design entity provides flexible modeling. Based on this design space representation scheme, a pruning algorithm which can transform the total design space into sub-design space that satisfies the user requirements is given. We have shown the effectiveness of our framework by (ⅰ) constructing the design space of superscalar processor in attributed AND-OR graph (ⅱ) pruning it to obtain the ARM9 processor architecture. (ⅲ) modeling the components of the architecture and (ⅳ) simulating the ARM9 model.

• Journal of the Korea Society for Simulation
• /
• v.13 no.1
• /
• pp.1-9
• /
• 2004

In this paper some models for obtaining the distribution of a sojourn time in CDMA cellular systems are proposed. Knowledge on this is essential for reliable modeling of the soft handoff and for solving other related problems in the analysis of cellular system. The proposed model is based on random walk and can be adopted to different conditions. Analytical results can be obtained that lead to a quite complicated numerical scheme so simulation models are used for Monte Carlo experiments. Main assumptions include different kinds of mobile carriers (pedestrians and transport passengers) and round shape of a cell. The scheme for simulation experiments is presented along with the discussion of simulation results.

• Speech Sciences
• /
• v.10 no.1
• /
• pp.71-84
• /
• 2003

In the acoustic modeling for large vocabulary speech recognition, a sparse data problem caused by a huge number of context-dependent (CD) models usually leads the estimated models to being unreliable. In this paper, we develop a new clustering method based on the C45 decision-tree learning algorithm that effectively encapsulates the CD modeling. The proposed scheme essentially constructs a supervised decision rule and applies over the pre-clustered triphones using the C45 algorithm, which is known to effectively search through the attributes of the training instances and extract the attribute that best separates the given examples. In particular, the data driven method is used as a clustering algorithm while its result is used as the learning target of the C45 algorithm. This scheme has been shown to be effective particularly over the database of low unknown-context ratio in terms of recognition performance. For speaker-independent, task-independent continuous speech recognition task, the proposed method reduced the percent accuracy WER by 3.93% compared to the existing rule-based methods.

• IE interfaces
• /
• v.24 no.1
• /
• pp.15-23
• /
• 2011

This study considers paging schemes that can page some cells or only one cell within the location area to reduce paging cost by using PAs (Paging Agents) and compares their performances by using a new analytic method. There are three ways of paging schemes using PAs; BSPA (Base Staton Paging Agent), 2SPA (2-Step Paging Agent), LAPA (Location Area Paging Agent). This study proposes exact performance of BSPA and 2SPA using a new analytic method based on Markov chain modeling to find the most efficient paging scheme. Numerical results for various circumstances are presented by using proposed analytic method to select a proper paging scheme in mobile communication networks.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.5
• /
• pp.667-675
• /
• 2002

In this Paper, we present a new nonlinear active noise control scheme using neural networks. Two neural network4 are used, one is for the active controller and another one is for the secondary path model. This scheme is suitable for the plant which has time-varing secondary path dynamics, because the secondary path modeling is performed via on-line fashion. Simulation results of active noise control with nonlinear primary/secondary path are presented. The results show that the new algorithm can reduce the noise level greatly.

• Journal of the Korean Society of Industry Convergence
• /
• v.19 no.1
• /
• pp.18-30
• /
• 2016

In this paper, we propose a new technique to the design and real-time control of an adaptive controller for robotic manipulator based on digital signal processors. The Texas Instruments DSPs(TMS320C80) chips are used in implementing real-time adaptive control algorithms to provide enhanced motion control performance for dual-arm robotic manipulators. In the proposed scheme, adaptation laws are derived from model reference adaptive control principle based on the improved Lyapunov second method. The proposed adaptive controller consists of an adaptive feed-forward and feedback controller and time-varying auxiliary controller elements. The proposed control scheme is simple in structure, fast in computation, and suitable for real-time control. Moreover, this scheme does not require any accurate dynamic modeling, nor values of manipulator parameters and payload. Performance of the proposed adaptive controller is illustrated by simulation and experimental results for a dual arm robot manipulator with eight joints. joint space and cartesian space.