• Journal of Electrical Engineering and information Science
• /
• 제2권4호
• /
• pp.92-98
• /
• 1997

This paper presents a new approach to obtaining a reduced-order model for multi-module converters. The proposed approach can be used to derive the reduced-order model for a wide class of multi-module converters including pulse-width-modulated (PWM) converters, soft-switched PWM converters, and resonant converters. The reduced-order model has the structure of a conventional single-module converter while preserving the dynamics of the original multi-module converter. Derivation procedures and the use of the reduced-order model is demonstrated using a three-module boost converter.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1128-1129
• /
• 2008

The detailed modeling method of photovoltaic (PV) module are useful to perform detailed analysis of PV array performance for changing meteorological conditions, verify actual rated power of PV system sizing and, determine the optimal design of PV system and components. This paper investigates a modeling approach of PV module performance in terms of irradiance and temperature changes and compared measured with simulated value of PV modules.

• 전기학회논문지
• /
• 제58권12호
• /
• pp.2379-2384
• /
• 2009

In this paper, based on MATLAB which has characteristic that is simply applied to control algorithm and source modeling, photovoltaic modeling is implemented. Photovoltaic modeling is similarly performed PV array and simulated. Also, in order to output maximum power of PV, MPPT control is simulated. Moreover, simulation of converter is performed by means of PLECS (Piece wise Linear Electrical Simulation) which is easily made schematic of power electronics. Also, we compare simulation results and Sharp PV module and Suntech PV module. Finally, informative simulation of PV generation system is provided.

• 통합자연과학논문집
• /
• 제10권1호
• /
• pp.58-63
• /
• 2017

Photovoltaic (PV) are generally modeled using mathematical equations that describe the PV system behavior. Most of the modeling approach is very simple in terms of that PV module temperature is calculated from nominal constant cell temperature such as ambient temperature and incoming solar irradiance. In this paper, we newly present MATLAB model particularly embedding the effect of wind speed to describe more accurate cell temperature. For analyses and validate purpose of the proposed model, solar power is obtained and compared with and without wind speed from the 50Wp PV module provided by vendor datasheet. In the simulation result, we found that power output of the module is increased to 0.37% in terms of cell temperature a degreed down when we consider the wind speed in the model. This result is well corresponded with the well-known fact that normal PV is 0.4% power changed by cell temperature a degree difference. Therefore it shows that our modeling method with wind speed is more appropriate than the methods without the wind speed effect.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1996년도 춘계공동학술대회논문집; 공군사관학교, 청주; 26-27 Apr. 1996
• /
• pp.381-385
• /
• 1996

본 연구에서는 자동화 제조 시스템 (Automatic Manufacturing System :AMS)의 설계및 구현에 있어서 물리적인 검증 (Physical Validation)을 위한 소프트웨어 시스템의 구조를 제안하고 구현하였다. 제안된 소프트웨어 시스템은 설비들과 물류 흐름에 있어서 간섭 검증과 운영 가능성을 검증하는 기능을 제공하며 크게 4개의 모듈로 나누어져 있다. : 1) 기본 형상들을 이용하여 원하는 형상을 정의하는 "Shape Modeling Module", 2) 실제 설비의 Kinematics와 기능을 모델링하는 "Facility Modeling Module", 3) AMS의 물리적인 배치를 구성하는 "Layout Design Module", 4) 모델링된 AMS를 실행시켜 볼 수 있는 "Factory Emulation Module". 이와 같은 소프트웨어 시스템을 구현하기 위해 수행된 주된 연구는 다음과 같다. : 1) AMS를 구성하는 설비들을 모델링하는 방법을 제시, 2) 표준 설비들의 Instancing Parameter 제시, 3) C++과 GL을 이용하여 소프트웨어로의 구현, 4) Flexible Manufacturing System (FMS)에의 응용.lexible Manufacturing System (FMS)에의 응용.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.788-793
• /
• 2001

Finite element analysis was carried out to investigate the integrity and reliability of boiler module during sea transportation. The boiler module was supported by steel structure to relieve the instantaneous shock from oceanic wave and its primary parts were strengthened with several reinforcements. Finned tube walls which were used in the furnace wall were assumed as orthotropic plates having equivalent material properties. The bank tubes were also equivalently modeled in accordance with ASME B31.1 for the convenience of finite element modeling. The calculation results were compared with the yield stress of the material. In particular, the bank tube stress, which was evaluated by converting the calculated stresses in equivalent tubes into those in original tubes by using the ratio of diameter, was also examined with yield stress.

• 반도체디스플레이기술학회지
• /
• 제21권4호
• /
• pp.110-115
• /
• 2022

Accurate current-voltage modeling of solar cell systems plays an important role in power prediction. Solar cells have nonlinear characteristics that are sensitive to environmental conditions such as temperature and irradiance. In this paper, the output characteristics of photovoltaic module are accurately predicted by combining the artificial neural network and physical model. In order to estimate the performance of PV module under varying environments, the artificial neural network model is trained with randomly generated temperature and irradiance data. With the use of proposed model, the current-voltage and power-voltage characteristics under real environments can be predicted with high accuracy.

• 천문학회보
• /
• 제41권2호
• /
• pp.55.1-55.1
• /
• 2016

We have developed a module for the dust continuum radiative transfer calculation as part of "Packages of Unified modeling for Radiative transfer, gas Energetics, and Chemistry (PUREC)". PUREC will be applied to interprete observations of protoplanetary disks. When a disk is under the hydrostatic equilibrium condition, the dust temperature and the vertical density structure should be calculated simultaneously. This module calculates the dust temperature by using the method of mean intensity (Lucy et al. 1999). In the very optically thick mid-palne, the Monte-carlo method is not efficient, thus, we apply "modified random walk" and "Partial Diffusion Approximation" to the module. The module has been verified by bechmark tests.

• 한국전산구조공학회논문집
• /
• 제28권4호
• /
• pp.393-400
• /
• 2015

본 연구는 기획단계, 설계단계 및 시공단계에서 사용가능한, 모듈러 강교량 상부구조 정보모델 생성의 효율성을 향상하기 위하여, 파라메트릭 모델링(parametric modeling)을 통해 상부모듈을 생성하고 이들을 조합할 수 있는 방안을 제시하였다. 파라메트릭 모델링을 적용하기 위한 요소 도출을 위하여 상부구조 구성요소 분류를 수행하였고, 분류된 요소를 결합 조건에 따라 13개의 종으로 구분하였다. 또한 모듈러 강교량 공장 제작 단위인 상부모듈의 조합을 통해 안정적인 상부구조 생성을 위한 세 가지 조합조건을 도출하였다. 파라메트릭 모델링을 통한 상부모듈 생성 시 구성요소 형상에 조합조건을 반영하는 변수를 도출하였다. 이를 본 연구에서 개발한 Building Information Model(BIM) 소프트웨어기반의 생성 인터페이스를 활용하여 타입과 변수에 따른 상부모듈 구성요소들을 생성하였다. 이때 생성된 상부모듈에는 상부구조로 조합하기 위한 정보를 반영하였으며, 이를 검증하기 위하여 Industry Foundation Classes(IFC) 기반의 정보모델을 생성하고, 반영한 속성정보를 확인함으로써 상부구조 생성에 활용할 수 있음을 확인하였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제14권3호
• /
• pp.264-271
• /
• 2013

A method of multiple transport-aircraft mission modeling is proposed in order to improve the efficiency of evaluating and optimizing pre-mission plans. To deal with the challenge of multiple transport-aircraft missions, the object-oriented modeling method is utilized. The elements of the mission are decomposed into objects and businesses, And the major mission objects and their important properties are summarized. A complex mission can be broken down into basic business modules such as the ground section and flight section. The business models of loading and fueling services in the ground section are described. The business model of the flight section is composed of an air route and flight profile with the flight equation and the fuel consumption model. The logical relationship of objects and business modules is introduced. The architecture of the simulation system, which includes a database, computation module, graphical user interface (GUI) module, and a result analysis module, is established. A sample case that includes two different plans is provided to verify the model's ability to achieve multi-aircraft composite mission simulation.