• 전기학회논문지
• /
• 제58권12호
• /
• pp.2379-2384
• /
• 2009

In this paper, based on MATLAB which has characteristic that is simply applied to control algorithm and source modeling, photovoltaic modeling is implemented. Photovoltaic modeling is similarly performed PV array and simulated. Also, in order to output maximum power of PV, MPPT control is simulated. Moreover, simulation of converter is performed by means of PLECS (Piece wise Linear Electrical Simulation) which is easily made schematic of power electronics. Also, we compare simulation results and Sharp PV module and Suntech PV module. Finally, informative simulation of PV generation system is provided.

• 한국CDE학회논문집
• /
• 제1권1호
• /
• pp.45-55
• /
• 1996

This paper presents a new approach to non-parametric modeling of cutter swept surface (CSS) for cutting simulation. Instead of explicitly modeling cutter swept volumes, silhouette curves of the cutter surface are utilized in computing the z-value of the CSS at a grid point on the x,y-plane. The non-parametric evaluation of the CSS constitutes the integral part of 3-axis cutting simulation. The proposed method is more efficient than the existing ones in the case of conventional cutters (i.e., ball-end mills and flat-end mills), and more importantly, it enables the non-parametric modeling of the CSS for the round-end mills which was not possible with the existing methods.

• 전기학회논문지
• /
• 제56권12호
• /
• pp.2091-2097
• /
• 2007

This paper described the verification of modeling technique of underground distribution from comparison between field test and simulation. It needs more exact transient phenomenon analysis model to establish lightning protection of underground distribution line. Although, there were a lot of transient phenomenon researches, nobody could has verified the confidence of modeling from field tests in interior until now. So, simulation model verified field test is needed to analyse transient phenomenon of underground distribution system. The examination must be accomplished in many different condition before suggesting these verified analysis model. In this paper, the conditions were examined and the various data results on the different line composition was compared with the EMTP simulation, when the lightning impulse test was accomplished at underground distribution line. Also the value between field test and simulation was very closed and the method of modeling has demonstrated confidence, when the method is used to analyse domestic transient phenomenon of underground distribution.

• Nuclear Engineering and Technology
• /
• 제44권2호
• /
• pp.103-122
• /
• 2012

Significant advances in computational performance have occurred over the past two decades, achieved not only by the introduction of more powerful processors but the incorporation of parallelism in computer hardware at all levels. Simultaneous with these hardware and associated system software advances have been advances in modeling physical phenomena and the numerical algorithms to allow their usage in simulation. This paper presents a review of the advances in computer performance, discusses the modeling and simulation capabilities required to address the multi-physics and multi-scale phenomena applicable to a nuclear reactor core simulator, and present examples of relevant physics simulation codes' performances on high performance computers.

• 한국국방경영분석학회지
• /
• 제25권1호
• /
• pp.37-54
• /
• 1999

In this paper, we proposed a modeling method of continuous combat simulation by using VENSIM. VENSIM is a CASE tool for developing continuous simulation. It provides a simple and flexible way of building simulation models from causal loop or influence diagram. As a case model, we developed "a prototype model of battle"incorporating infantry, artillery, air defense weapon, aircraft, and guerrilla engagement.ngagement.

• 한국시뮬레이션학회논문지
• /
• 제22권4호
• /
• pp.67-82
• /
• 2013

본 논문은 공학급 국방 모델의 시뮬레이션 성능 향상을 위해 다중 충실도(Multi-fidelity) 모델링 시뮬레이션(M&S: Modeling and Simulation) 기법을 제안한다. 제안하는 기법은 다양한 충실도를 지닌 모델을 활용하여 고 충실도 모델의 시뮬레이션과 비교하여 유사한 수준의 시스템 분석 결과를 얻음과 동시에 시뮬레이션 성능 측면에서 이득을 가져오는 방안이다. 다중 충실도 원리를 적용하기 위해 본 논문은 충실도를 모델 동작과 실행 측면으로 세분화하고, 충실도 변환 지점을 FCP (Fidelity Change Point)로 정의한다. 이러한 원리를 바탕으로 본 논문은 다음의 세 가지 쟁점을 다룬다. 먼저, 모델 동작과 실행 측면의 충실도 변환을 위한 모델 구조와 제안하는 모델에 대한 수학적 형식론, 마지막으로 모델 실행을 위한 시뮬레이션 알고리즘을 제안한다. 사례 연구로 어뢰의 표적 추적 시나리오에 대한 기초 실험을 수행하였고, 실험 결과 제안하는 기법을 사용한 경우 기존의 시뮬레이션과 비교하여 최대 4.24배의 시뮬레이션 성능 향상을 보임을 확인하였다. 본 논문에서 제안하는 기법은 M&S 기반의 시스템 분석을 하는 다양한 분야에서 활용될 수 있음을 기대한다.

• 한국시뮬레이션학회논문지
• /
• 제19권4호
• /
• pp.31-41
• /
• 2010

지금까지의 함정과 관련된 연구들은 전술 체계 및 함정 개발 위주로 진행되어 왔으며 승조원의 거주 생활 환경 개선에 대한 연구는 부족했다. 본 연구 대상인 함정 crew mess room은 승조원 불특정 다수가 이용하는 함정 내 대표적인 복지 시설물로 기존의 전술 전략 중심의 모델링 및 시뮬레이션 방법론의 적용은 어려움이 있다. 이에 시설물의 혼잡도 평가 및 운용 시나리오 검증을 위한 3차원 이산 사건 시뮬레이션 기반의 시뮬레이션 모델링 프레임워크를 제안하고 구체적인 사례를 통해 대기시간 이동시간, 이동거리 등의 결과 분석을 통해 이를 검증하였다. 제안한 혼잡도 평가 시뮬레이션 프레임워크는 함정 crew mess room과 같은 복지성격의 시설물의 모델링 및 시뮬레이션을 적용하기 위한 절차 및 시스템 구성 요소를 포함하고 있으며 이는 향후 시뮬레이션 연구 수행에 가이드 역할을 수행할 수 있다.

• 한국군사과학기술학회지
• /
• 제19권6호
• /
• pp.769-778
• /
• 2016

Technical approach on the modeling, simulation and experimentation methods, which are applied for developing a constructive simulation and engagement experimentation software for supporting light weight torpedo operational tactics study, is introduced. Conceptual modeling for the weapon engagement and simulation entities, mathematical models for the simulation elements, approach for the design of experimentations are described, and screen shots of the software are also presented as some example results of experimentation and analysis. It is found that the simulation and experimentation results are useful to support and fulfill the mission needs and requests. As a consequence, the technical approach is rated to be appropriate to accomplish the dedicated purpose of the simulation and experiments.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2001년도 The Seoul International Simulation Conference
• /
• pp.136-140
• /
• 2001

The 3rd generation mobile telecommunication fields are being standardized and developed in two parts, 3GPP and 3GPP2. These two parts have established each Network Architecture Models to achieve the goals basically required in the 3rd generation and to make it progress to IP network in the future. To achieve these goals many system architectures are proposed. Not only functional aspects but also performance aspects are considered as major factors. This paper proposes a new method of performance evaluation modeling and simulation that improved the existing way. The method proposed in this paper is Aspect oriented logical performance analysis Modeling and Simulation method. This proposed method is expected to improve efficiency of performance analysis modeling and simulation on the 3rd generation mobile telecommunication system.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 1999년도 추계학술대회 논문집
• /
• pp.24-29
• /
• 1999

Proposed in this paper is a modeling and simulation methodology for a virtual manufacturing environment. Based on DEVS formalism[Zeigler 76], the proposed model, so called GKDEVS, is designed to descript the geometrical knematic structure as well as event-driven and continuous state dynamics. In terms of abstract simulation algorithm[Zeigler 84], the simulation method of GKDEVS is proposed for combined discrete-continuous simulation. Using the GKDEVS, and FMS model consisting of a turing machine, a 3-axis machine and a RGV-mounted robot is constructed and simulated.