• 산업경영시스템학회지
• /
• 제34권1호
• /
• pp.42-51
• /
• 2011

Poisson model and Gamma-Poisson model are popularly used to analyze statistical behavior from defective data. The methods are based on binary criteria, that is, good or failure. However, manufacturing industries prefer polytomous criteria for classifying manufactured products due to flexibility of marketing. In this paper, I introduce two multivariate Gamma-Poisson(MGP) models and estimation methods of the parameters in the models, which are able to handle polytomous data. The models and estimators are verified on defective pixels of LCD manufacturing. Experimental results show that both the independent MGP model and the multinomial MGP model have excellent performance in terms of mean absolute deviation and the choice of method depends on the purpose of use.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.32-35
• /
• 1996

In this paper, it is shown that the dominant errors of baro-altimeters can be characterized by bias and scale factor errors. Also an optimal filter for estimating both bias and scale factor is derived based on the concept of model transition. The optimal filter is, however, not realizable because the model transition hypotheses increase exponentially. Therefore a realizable suboptimal filter using the interacting multiple model(IMM) technique is proposed. Computer simulation results show that the estimation errors of the proposed filter are smaller than those of the conventional least squares algorithm with a forgetting factor when both the bias and the scale factor are varying.

• Journal of Welding and Joining
• /
• 제17권6호
• /
• pp.100-107
• /
• 1999

In this paper, we deal with the speckle noise reduction and parameter estimation of ultrasonic NDT(non-destructive test) signals obtained during weld inspection of piping. The overall approach consists of three major steps, namely, speckle noise analysis, proposition of wavelet domain AR(autoregressive) model and flaw detection by proposed model parameter. The data are first processed whereby signals obtained using vertical and angle beam transducer. Correlation properties of speckle noise are then analyzed using multiresolution analysis in wavelet domain. The parameter estimation curve obtained using the proposed model is classified a flaw in weld region where is contaminated by severe speckle noise and also clear flaw signal is obtained through CA-CFAR threshold estimator that is a nonlinear post-processing method for removing the noise from reconstructed ultrasonic signal.

• 정보처리학회논문지D
• /
• 제11D권6호
• /
• pp.1269-1276
• /
• 2004

본 논문에서는 기존의 소프트웨어 신뢰성 모형인 Goel-Okumoto 모형과 Yamada-Ohba-Osaki 모형을 재조명하고 또, 랄리 분포를 이용한 랄리 모형을 적용하여 모수 추정방법을 연구하였다. 본 연구에서는 기존의 최우추정법과 잠재변수를 도입하여 깁스 샘플링(Gibbs sampling)을 이용한 베이지안 모수추정 방법을 비교하고 그 특징을 분석하고자 한다. 또, 효율적 모형을 위한 모형선택으로서 잔차제곱합(Sum of the squared errors ; SSE)과 Braun 통계량을 적용하여 모형들에 대한 효율성 입증방법을 설명하였다. 그리고 수치적인 예로서 실제 자료를 이용한 수치 견과를 나열하였다. 이 접근방법을 기초로 하여 수명분포가 중첩(Superposition) 및 혼합(Mixture)인 경우에 대한 접근방법이 연구되었으면 한다.

• 한국생산제조학회지
• /
• 제26권1호
• /
• pp.50-58
• /
• 2017

This paper proposes a real-time robotic vision control scheme using the weighting matrix to efficiently process the vision data obtained during robotic movement to a target. This scheme is based on the vision system model that can actively control the camera parameter and robotic position change over previous studies. The vision control algorithm involves parameter estimation, joint angle estimation, and weighting matrix models. To demonstrate the effectiveness of the proposed control scheme, this study is divided into two parts: not applying the weighting matrix and applying the weighting matrix to the vision data obtained while the camera is moving towards the target. Finally, the position accuracy of the two cases is compared by performing the slender bar placement task experimentally.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.286-289
• /
• 2000

from the viewpoint of model-based current control it is indispensable to use the accurate system parameters for the high control performance. This paper adopts the Least-Squares algorithm as a parameter estimation scheme because it has the fast convergence rate and the low sensitivity to noises. in case of the PI current controller with high gains the simulation results show that the adopted estimation scheme can be successfully applied to PWM converters and also show that the control performance can be improved by using the estimated parameters.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.149-152
• /
• 1998

From the viewpoint of model-based current control, it is indispensable to use the accurate system parameters for the high control performance. This paper adopts the Least-Squares algorithm as a parameter estimation scheme because it has the fast convergence rate and the low sensitivity to noises. In case of the intelligent current controller with delay compensator, the simulation results show that the adopted estimation scheme can be successfully applied to PWM converters and also show the improved control performance in the estimated parameters.

• KSBB Journal
• /
• 제5권2호
• /
• pp.133-139
• /
• 1990

1회의 회분실험 데이터로부터 효소반응 속도식의 매개 변수를 쉽게 추정할 수 있는 방법을 제시하였다. 여러 가지 반응패턴을 갖는 모델식에 있어서 효소반응 데이터를 적용시킨 결과 정확하고 간편하게 매개변수값을 추정할 수 있었다. 가역반응의 경우에는 3개의 매개변수를 갖는 모델식의 형태로 평형 기질농도 및 매개변수를 추정할 수 있었다. 또한 반응특성이 잘 알려져 있지 않은 효소 반응 시스템에 있어서는 효소반응이 기질이나 생산물의 저해작용을 받는지 여부와 그 저해패턴을 확인할 수 있었다.

• Journal of the Korean Data and Information Science Society
• /
• 제7권2호
• /
• pp.227-234
• /
• 1996

The discount survival model is proposed for the application of the Cox model on the analysis of survival data with time-varying effects of covariates. Algorithms for the recursive estimation of the parameter vector and the retrospective estimation of the survival function are suggested. Also the algorithm of forecasting of the survival function of individuals of specific covariates in the next time interval based on the information gathered until the end of a certain time interval is suggested.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제7권4호
• /
• pp.285-294
• /
• 2007

In this paper, we investigate a novel online estimation algorithm for dynamic Bayesian network(DBN) parameters, given as conditional probabilities. We sequentially update the parameter adjustment rule based on observation data. We apply our algorithm to two well known representations of DBNs: to a first-order Markov Chain(MC) model and to a Hidden Markov Model(HMM). A sliding window allows efficient adaptive computation in real time. We also examine the stochastic convergence and stability of the learning algorithm.