• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.377-382
• /
• 2004

This paper presents a novel optimization method for the air- and gas-supplying network comprised of several air compression systems and air and gas streams in an industrial chemical plant. The optimization is based on the hybrid model developed by Han and $Han^1$ for predicting the power consumption of a compression system. A constrained optimization problem was formulated to minimize the total electric power consumption of all the compression systems in the air- and gas-supplying network under various operating constraints and was solved using a successive quadratic optimization algorithm. The optimization approach was applied to an industrial terephthalic acid manufacturing plant to achieve about 10% reduction in the total electric power consumption under varying ambient conditions.

• 대한기계학회논문집B
• /
• 제22권6호
• /
• pp.823-831
• /
• 1998

In order to investigate the impulsive noise at the exit of high-speed railway tunnel and the pressure transients inside the tunnel, numerical calculations using a Total Variation Dimishing difference scheme were applied to axisymmetric unsteady compressible flow field. Some compression wave forms were assumed to model the compression wave produced in real high-speed railway tunnel. The numerical data were extensively explored to analyze the peak over-pressure and maximum pressure gradient in the pressure wavefront. The effect of the distance and cross-sectional area ratio between two-continuous ducts on the characteristics of the pressure waves were investigated. The peak over-pressure inside the second duct decreases for the distance and cross-sectional area ratio between two tunnels to increase. The peak over-pressure and maximum pressure gradient of the pressure wavefront inside the second duct increase as the maximum pressure gradient of initial compression wave increases. The present results were qualitatively well agreed with the results of the previous shock tube experiment.

• 한국정밀공학회지
• /
• 제26권8호
• /
• pp.142-147
• /
• 2009

Spinal fixation systems provide surgical versatility, but the complexity of their design reduces their strength and fatigue resistance. There is no published data on the mechanical properties of such screws. Screws were assembled according to a vertebrectomy model for destructive mechanical testing. A group of two assemblies was tested in static compression. One group was applied to surface a grit blasting method and another group was applied to surface a bead blasting method. Modes of failure, yield, and ultimate strength, yield stiffness, and cycles to failure were determined for six assembles. Static compression 2% offset yield load ranges was from 327 to 419N. Fatigue loads were determined two levels, 37.5% and 50% of the average load from static compression ultimate load. An assembly of bead blasting treatment only achieved 5 million cycles at 37.5% level in compression bending.

• Structural Engineering and Mechanics
• /
• 제23권4호
• /
• pp.369-386
• /
• 2006

The influence of reinforcement buckling on the flexural response of reinforced concrete members is studied. The stress-strain response of compression reinforcement is determined computationally using a large-strain finite element model for bars of varied diameter, length, and initial eccentricity, and a mathematical expression is fitted to the simulation results. This relationship is used to represent the response of bars in compression in a moment-curvature analysis of a reinforced concrete cross section. The compression bar may carry more or less force than a tension bar at a corresponding strain, depending on the relative influence of Poisson effects and bar slenderness. Several cross-section analyses indicate that, for the distances between stirrups prescribed in modern concrete codes, the influence of inelastic buckling of the longitudinal reinforcement on the monotonic moment capacity is very small and can be neglected in many circumstances.

• 한국CDE학회논문집
• /
• 제12권2호
• /
• pp.109-117
• /
• 2007

Three-dimensional mesh models have been widely used in various applications such as simulations, animations, and e-catalogs. In such applications the normal vectors of mesh models are used mainly for shading and take up the major portion of data size and transmission time paper over networks. Therefore a variety of techniques have been developed to compress them efficiently. In this paper, we propose the MOEC (Modified Octree Encoding Compression) algorithm, which allow multi lever compression ratios for 3D mesh models. In the algorithm, a modified octree has nodes representing their own positions and supporting a depth of the tree so that the normal vectors are compressed up to levels where the shading is visually indistinguishable. This approach provides efficient in compressing normals with multi-level ratios, without additional encoding when changing in compression ratio is required.

• 소성∙가공
• /
• 제6권4호
• /
• pp.311-318
• /
• 1997

In recent years, compression molding of fiber-reinforced thermoplastics has been increased in commercial aspects. During a compression molding process of composites, the flow analysis must be developed in order to accurately predict the finished part properties as a function of the molding process parameters. In this paper, a new model is presented which can be used to predict the flow under consideration of the slip of mold-composites and extensional & shear viscosity ratio M and slip parameter$\alpha$ on the mold filling parameters are discussed.

• Metals and materials international
• /
• 제24권6호
• /
• pp.1249-1255
• /
• 2018

High temperature compression tests for newly developed Al-Zn-Mg alloy were carried out to investigate its hot deformation behavior and obtain deformation processing maps. In the compression tests, cylindrical specimens were deformed at high temperatures ($300-500^{\circ}C$) and strain rates of 0.001-1/s. Using the true stress-true strain curves obtained from the compression tests, processing maps were constructed by evaluating the power dissipation efficiency map and flow instability map. The processing map can be divided into three areas according to the microstructures of the deformed specimens: instability area with flow localization, instability area with mixed grains, and stable area with homogeneous grains resulting from continuous dynamic recrystallization (CDRX). The results suggest that the optimal processing conditions for the Al-Zn-Mg alloy are $450^{\circ}C$ and a strain rate of 0.001/s, having a stable area with homogeneous grains resulting from CDRX.

• 대한교통학회지
• /
• 제22권6호
• /
• pp.77-88
• /
• 2004

본 연구는 고속도로 구간의 돌발상황 검지 모형에서 돌발상황과 비슷한 특성으로 오경보를 일으키게 되는 유사 돌발상황의 하나인 압축파 상태를 검지하기 위한 모형의 개발에 있다. 연구는 현재 고속도로 교통관리시스템(FTMS)에 사용되는 다목적 돌발상황 검지 모형(APID)의 압축파 검사를 기반으로 이를 압축파 검사를 수행하지 않는 타 모형(DES, DELOS)에 적용가능하도록 모듈화시켜 오경보 발생건수가 감소하는지 확인하는 과정으로 수행되었다. 평가에 있어서는 모형의 민감도 측면에 초점을 두고 polling cycle별로 분석을 수행하였으며 각 polling cycle별로 모형이 교통상황을 얼마나 반영하는지에 대하여 평가하였다. 또한 기존, 개발 모형들에 대한 전반적인 검지율와 오검지율, 평균 검지시간을 산정하도록 하였다. 개발 모형을 적용한 결과 혼잡상태에서 발생하는 오경보 횟수가 상당부분 감소하여 오검지율이 개선되었으며 검지율, 평균검지시간에는 큰 변화가 없었다. 따라서 본 모형을 이용하여 실제 고속도로 교통 관리 시스템에도 적용시 개선효과를 얻을 수 있을 것이라 판단된다.

• 콘크리트학회논문집
• /
• 제16권3호
• /
• pp.345-356
• /
• 2004

다양한 압축 응력 상태에서의 콘크리트의 거동 특성을 나타내기 위한 소성 모델을 개발하였다. 응력 성분은 압축 상태에서 각각의 거동특성을 갖는 세 개의 직교 성분으로 분리하였다. 각 성분의 거동 특성을 독립적으로 나타내기 위하여 각 성분에 대한 독립적인 다중 파괴기.준을 이용하는 소성모델을 적용하였다. 각 파괴면은 실험결과에 근거하여 각 파괴기준에 대한 등가 소성 변형률에 의하여 정의하였다. 또한, 압축손상에 의한 체적팽창을 나타내기 위한 간단한 비상관 소성흐름법칙을 제안하였다. 제안된 모델은 다양한 재료 특성 및 응력 상태를 갖는 기존의 실험 결과들과 비교를 통하여 검증되었다. 이 비교는 기존의 소성모델보다 제안된 모델의 적용성이 우수함을 입증하고 있다.

• 콘크리트학회논문집
• /
• 제18권3호
• /
• pp.379-388
• /
• 2006

본 연구의 목적은 휨과 전단에 지배 받는 철근콘크리트 보에서 아치작용에 의한 전단기여분을 평가하는 모델을 개발하는 것이다. 전단력은 휨모멘트의 변화률이라는 관계식을 기초로, 분산트러스 이상화 기법을 이용하여 횡단면에서 베르누이(Bernoulli) 휨 평면으로부터 전단변형적합조건을 새롭게 유도하였다. MCFT와 분산트러스 이상화를 통해 전단흐름에 의한 복부전단요소의 전단곡률을 일치시키는 전단변형적합조건을 수립하였다. 전단변형적합조건을 이용하면, 보 전단거동은 타이드아치작용과 보 작용의 두 성분으로 수치적 분해 될 수 있다. 그리고 두 기본 작용의 분해가 가능하기 때문에 전단에 지배받는 보의 내력을 예측할 수 있다. 제안 모델의 유효성은 기존 문헌에 수록된 활용 가능한 실험 자료를 통해 검증하였고, 수행 결과는 예측치와 실험치 사이에서 실질적으로 일치하는 결과를 얻었다. 결과의 정확성으로부터 제안 모델의 합리성을 확신할 수 있었다.