• 한국화재소방학회논문지
• /
• 제10권4호
• /
• pp.29-36
• /
• 1996

건축물 화재로 인한 인적, 물적 피해를 방지하기 위하여는 먼저 이들 시설, 설비에 존재하는 잠재위험요인을 찾아내고 위험이 얼마나 큰가를 분석하는 위험성 평가가 수행되어야 한다. 본 연구에서는 건물의 화재 위험성을 822개의 Checklist에 의해 평가하도록 하였으며, 정량적 평가를 위하여 주요 구성 요소를 10개의 대분류로 나누고, 가중치를 부여하여 100점 만점의 점수를 산출하도록 하였다. 건물의 실제평가를 통하여 평가 모델의 적정성을 검토한 결과, 본 모델은 일반 모든 건물에 대하여 평가 적용이 가능하도록 되었다. 또한 Checklist에 의한 세부적인 질문기법으로 작성되어 건물의 화재 위험성 평가를 수월하게 수행할 수 있도록 하였다. 따라서 본 평가모델의 제시는 이제까지 국내에서 소방진단을 위한 뚜렷한 평가모델이 마련되지 못한 현시점에서 방화관리자 등 소방관련자에게 매우 유익한 평가모델이 될 것이다.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 1997년도 International Symposium on Fire Science and Technology
• /
• pp.413-422
• /
• 1997

Fire characteristics of a typical apartment building in Korea was studied through full scale experiment and zone model simulation. The fire was ignited at the living room and allowed to spread to other parts of a single unit in a five storied apartment building. Various data including temperatures, species concentrations, and images were collected in the experiment. A zone model(CFAST) was used to analyze the same apartment building that represents the average households in Korea. The results were compared with a full scale experiments. While CFAST allows one compartment involved with fire, the experiment allowed the fire to spread to other compartments. Therefore, the comparison between experimental data and Zone-Model data is valid until the living-room fire spread to other parts of the apartment. Flashover occurred at approximately 380 seconds in a fire experiment, and at approximately 420 seconds in Zone-Model. Based on all of data between experimental data and Zone-Model data, it is concluded that the safe escape time is about 250 seconds.

• Structural Engineering and Mechanics
• /
• 제71권2호
• /
• pp.131-138
• /
• 2019

It is necessary to predict subway induced vibration if a new subway is to be built. To obtain the vibration response reliably, a three-dimensional (3D) FEM model, consisting of the tunnel, the soil, the subway load and the building above, is established in MIDAS GTS NX. For this study, it is a six-story frame structure built above line 3 of Guangzhou metro. The entire modeling process is described in detail, including the simplification of the carriage load and the determination of model parameters. Vibration measurements have been performed on the site of the building and the model is verified with the collected data. The predicted and measured vibration response are used together to assess vibration level due to the subway traffic in the building. The No.1 building can meet work and residence comfort requirement. This study demonstrates the applicability of the numerical train-tunnel-soil-structure model for the serviceability assessment of subway induced vibration and aims to provide practical references for engineering applications.

• Structural Engineering and Mechanics
• /
• 제83권1호
• /
• pp.19-29
• /
• 2022

The angle steel frame confined concrete columns (ASFCs) are an emerging form of hybrid columns, which comprise an inner angle steel frame and a concrete column. The inner angle steel frame can provide axial bearing capacity and well confining effect for composite columns. This paper presents the experimental and theoretical studies on the seismic behaviour of ASFCs. The experimental study of the 6 test specimens is presented, based on the previous study of the authors. The theoretical study includes two parts. One part establishes the section analysis model, and it uses to analyze section axial force-moment-curvature. Another part establishes the section moment-curvature hysteresis model. The test and analysis results show that the axial compression ratio and the assembling of steel slabs influence the local buckling of the angle steel. The three factors (axial compression ratio, content of angle steel and confining effect) have important effects on the seismic behaviour of ASFCs. And the theoretical model can provide reasonably accurate predictions and apply in section analysis of ASFCs.

• Wind and Structures
• /
• 제36권6호
• /
• pp.379-392
• /
• 2023

Structural health monitoring is used to ensure the well-being of civil structures by detecting damage and estimating deterioration. Wind flow applies external loads to high-rise buildings, with the horizontal force component of the wind causing structural displacements in high-rise buildings. This study proposes a deep learning-based predictive model for measuring lateral displacement response in high-rise buildings. The proposed long short-term memory model functions as a sequence generator to generate displacements on building floors depending on the displacement statistics collected on the top floor. The model was trained with wind-induced displacement data for the top floor of a high-rise building as input. The outcomes demonstrate that the model can forecast wind-induced displacement on the remaining floors of a building. Further, displacement was predicted for each floor of the high-rise buildings at wind flow angles of 0° and 45°. The proposed model accurately predicted a high-rise building model's story drift and lateral displacement. The outcomes of this proposed work are anticipated to serve as a guide for assessing the overall lateral displacement of high-rise buildings.

• 설비공학논문집
• /
• 제28권1호
• /
• pp.1-6
• /
• 2016

This paper studies the wind pressure distribution over the Commonwealth Advisory Aeronautical Council building model (CAARC model) using CFD. We also considered the interaction between the CAARC model and other buildings. The Reynolds number based on the building height was 380,000. The number of sells for the simulation was about 500,000. The wind pressure was lowest when the wind direction was blowing at an angle 45 degrees of the CAARC model. When the gap between the two buildings in front of the CAARC was over 1/2 the horizontal length of the CAARC model, the wind pressure was higher than the pressure without the two buildings. When the distance between the two front buildings and the CAARC was less than 1.5 times the vertical length of the CAARC model, the wind pressure increased. Accordingly, the relative distance between two buildings or the distance from the CAARC model should be considered when extra wind exists due to other buildings.

• 한국측량학회지
• /
• 제28권1호
• /
• pp.125-132
• /
• 2010

최근 다양한 센서의 개발에 따라 동일한 지역에 대한 다양한 데이터들의 취득이 가능하게 되었다. 이러한 다차원 데이터를 이용하여 도시모델, 변화 탐지 등과 같은 다양한 활용분야에 적용하기 위해서 각 데이터들 간의 정합과정이 필수적이다. 본 연구에서는 기 구축된 건물모델을 참조모델로 사용하여 디지털 영상을 자동으로 정합하는 방법을 제시하였다. 두 데이터의 정합을 위해 기 구축 건물모델에서 최적정합건물을 추출 하였으며, 이를 영상에서 추출된 직선정합요소와 비교하여 최적정합건물과 상응하는 점 좌표 쌍을 추출하였다. 또한 추출된 점 좌표 쌍을 이용하여 영상데이터의 외부표정요소를 재계산함으로써 두 데이터간의 정합을 수행하였다. 실험결과는 제안된 방법이 두 데이터의 정합을 효율적으로 수행하는 것을 보여준다.

• 한국화재소방학회논문지
• /
• 제22권2호
• /
• pp.49-56
• /
• 2008

대구 지하철 화재가 발생한 중앙로 역사를 1/20 축소모델로 제작하여 연기확산 실험을 수행하였다. 지하역사의 양쪽으로 연결된 터널을 모델 실험에서도 구현해야 하지만 실험실 공간의 제약으로 인해 짧은 길이의 덕트에 유동저항을 줄 수 있는 메쉬를 부착하여 터널을 대신하였다. 방화로 인해 좌석에서 화재가 발생하였기 때문에 화재 시나리오는 좌석의 가연물 특성을 고려하여 선정하였고 가시화 장치와 온도 측정으로 역사로의 연기 전파 시간을 측정하였다. 현재 지하역사 화재시 보편적 개념으로 확립되어있는 급기형태의 제연 방식이 연기확산을 촉진하는 것을 실험적으로 확인하였다. 화재 환기가 없을 때 지하 3층 승강장에서의 화재발생으로부터 지하역사 전체에 연기가 확산되는 데에는 약 10분의 시간이 필요하였다.

• 한국건축시공학회지
• /
• 제15권3호
• /
• pp.307-316
• /
• 2015

공공건축물공사의 실적공사비제도에서 공사규모에 대한 건축공사비 차이가 크게 나타나므로, 산정방식에서 많은 문제점으로 제기된다. 이에 공사규모에 따라서 선별적, 차등적으로 적용할 예측모형의 개발이 필요하다. 이에 본 연구는 조달청에서 2011~2012년에 발주한 이미 준공된 42개 현장의 실적자료에서 공사규모 $5,000m^2{\sim}20,000m^2$으로 선정하여, 회귀분석을 통해서 추정된 모형을 도출하였다. 이를 근거로 신규공사에 적용하여 검증함으로써 합리적인 건축공사비 예측모형을 제시하였다.

• KIEAE Journal
• /
• 제10권5호
• /
• pp.151-157
• /
• 2010

This study is connected with evaluation of the progressive collapse resisting capacity for sustainable RC super tall building design. As the progressive collapse is not considered in current design codes in Korea, differences between linear static and dynamic analysis based on the GSA guidelines was analyzed for better evaluation, and the analysis model of flat plate system was determined. Finally, the progressive collapse resisting capacity was evaluated for structural system of super tall building. According to this study, the results by linear dynamic analysis were underestimated than the results by linear static analysis. Thus, the dynamic coefficient value of 2 provides conservative approach. The Effective Beam Width's model, currently used in field, is useful for the analysis about lateral force, but this model does not consider the effect of load redistribution by the slab. Hence, finite element analysis considering slab element will be needed for progressive collapse resisting capacity of the flat plate system. Finally, analysis model of 80-story building designed based on KBC(Korea Building Code) shows the weakness against progressive collapse because the DCR value is over 2. Thus, the countermeasure for alternative loading path such as installment of spandrel beam and reinforcements around slab is required to prevent the progressive collapse.