• Particle and aerosol research
• /
• v.16 no.2
• /
• pp.49-59
• /
• 2020

Various devices have been developed to the measurement of particulate matter pollutants, and Optical Particle Counter (OPC) that can be easily and quickly measured is widely used lately. The measured value by OPC is converted to weight concentration using the correction factor (CF). The calculation of CF is very important to improve the reliability and accuracy of OPC. In this study, the CF calculation study of light scattering laser photometer (model 8533, TSI) was carried out to measure in the atmospheric environment using 2 gravimetric devices and 3 light scattering laser photometer devices. Regression analysis and Tukey tests were used to significance the test of measurement devices. Measurements were carried out twice. There was a comparative analysis of measurement data between light scattering laser photometer and gravimetric devices in 1st measurement, and then the Evaluation of PM2.5 concentration corrected by CF performed in 2nd measurement. As a result of the significance analysis between light scattering laser photometer and gravimetric devices, the correlation between the same method was high, but the correlation between different methods was low. CF was calculated as 0.4258 based on the measurement results, and it is a similar level to previous studies at home and abroad. It is expected that these results can be used as basic data in the future study for air quality measurement research using light scattering laser photometer. Also, in order to improve the accuracy of the measurement techniques and the development of technology in the atmospheric environment, CF calculation research should be conducted continuously.

• Journal of Korea Port Economic Association
• /
• v.29 no.3
• /
• pp.25-37
• /
• 2013

This study investigates the export behavior of port of Pyeongtaek-Dangjin and Daesan. The monthly data cover the period from January 2002 to December 2012. This paper tests whether the exchange rate and the industrial production are stationary or not, rejecting the null hypothesis of a unit root in each of the level variables and of a unit root for the residuals from the cointegration at the 5 percent significance level. The error-correction model is estimated to find that Daesan port is faster than Pyeongtaek-Dangjin in adjusting the short-run disequilibrium. This paper finds that the exchange rate coefficient of Daesan port is higher than that of Pyeongtaek-Dangjin port, while the industrial production coefficient of the former is much smaller than that of the latter. The industrial production coefficient is, however, much higher than the exchange rate coefficient in both ports. The rolling regression shows that the influence of exchange rate and industrial production tends to increase in Pyeongtaek-Dangjin port but tends to decrease in Daesan. The impulse response functions indicate that export volumes respond much greater to the positive shocks in industrial production than in exchange rate, and the exchange rate shock decays very fast, while the industrial production shock lasts very long.

• Geophysics and Geophysical Exploration
• /
• v.18 no.2
• /
• pp.64-73
• /
• 2015

Recently, hydraulic fracturing is used in various fields and microseismic monitoring is one of the best methods for judging where hydraulic fractures exist and how they are developing. When locating microseismic events using single vertical well data, distances from the vertical array and depths from the surface are generally decided using time differences between compressional (P) wave and shear (S) wave arrivals and azimuths are calculated using P wave hodogram analysis. However, in field data, it is sometimes hard to acquire P wave data which has smaller amplitude than S wave because microseismic data often have very low signal to noise (S/N) ratio. To overcome this problem, in this study, we developed a grid search algorithm which can find event location using all combinations of arrival times recorded at receivers. In addition, we introduced and analyzed the method which calculates azimuths using S wave. The tests of synthetic data show the inversion method using all combinations of arrival times and receivers can locate events without considering the origin time even using only single phase. In addition, the method can locate events with higher accuracy and has lower sensitivity on first arrival picking errors than conventional method. The method which calculates azimuths using S wave can provide reliable results when the dip between event and receiver is relatively small. However, this method shows the limitation when dip is greater than about $20^{\circ}$ in our model test.

• Journal of Korea Water Resources Association
• /
• v.36 no.4
• /
• pp.691-703
• /
• 2003

In this paper, a new and integrated approach easily used to calculate the pollutant loads from agricultural watersheds is suggested. Basic concepts of this empirical tool are based on the hypotheses that variations in event mean concentrations(EMCs) of the pollutants from a given agricultural watershed during rainstorms are only due to the rainfall pattern. This assumption would be feasible to agricultural watersheds whose land uses does not change during the cultivation period overlapped by rainy season and also in which point-sources of the pollutants are rare. Therefore, if EMC data sets through extensive sampling from various rural areas are available, it is possible to establish relationships between EMCs, shapes and land uses of the watersheds, and rainfall events. For this purpose, fifty one sets of EMC values were obtained from nine different watersheds, and those data were used to develop predictive tools for the EMCs of 55, COD, TN and TP in rainfall runoff. The results of the statistical tests for those formulas show that they are not only fairly good in predicting actual EMC values of some parameters, but also useful in terms of calculating pollutant loads on any time-spans such as the day of rainfall event or weekly, monthly, and yearly. Their applicability was briefly demonstrated and discussed. Also, the unit loads calculated from EMCs based on different land uses and real rainfall data over one of the watershed used for this study. were provided, and they are compared with other well-known unit loads.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.1
• /
• pp.109-120
• /
• 2004

There has been outstanding research on the soil-water characteristic curves of unsaturated soils over the past several decades. Unfortunately, unsaturated soil mechanics has not been considered as an important factor in Korea. In this paper, laboratory test and numerical analysis(SoilVision Professional ver 3.04) were performed to investigate the prediction method of soil-water characteristic curve and unsaturated permeability coefficient in reclaimed ground. The pressure cell, desiccator, and tensiometor tests were conducted on three types of reclaimed soils(dredged soil, sand, weathered granite soil). Numerical analysis was executed to compare the results with the laboratory test results and also compared with the results of each prediction method. Based on the laboratory test, three different types of soils have shown different soil-water characteristic curves. The hysteresis fir these soils is clearly defined. As a result of numerical analysis, Fredlund & Xing's method and Fredlund & Wilson's model proved to worke out well for reclaimed ground soils in Korea. Also, predicting method based on the soil-water characteristic curves from the particle-size distributions is flirty reliable for estimating unsaturated permeability coefficient.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.9
• /
• pp.57-67
• /
• 2012

In the design for piled rafts, the load capacity of the raft is in general ignored and the load capacities of pile are only considered for the estimation of the total load carrying capacity of the piled raft. The axial resistance of piled raft is offered by the raft and group piles acting on the same supporting ground soils. As a consequence, pile - soil - raft and pile - soil interactions, occurring by stress and displacement duplication with pile and raft loading conditions, acts as a key element in the design for piled rafts. In this study, a series of centrifuge model tests has been performed to compare the axial behavior of group pile and raft with that of a piled raft (having 16 component piles with an array of $4{\times}4$) at the stiff and soft clays. From the test results, it is observed that the interactions of piles, soil, and raft has little influences on the load capacities of piles and raft in piled rafts compared with the load capacities of group piles and raft at the same clay soil condition.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.12
• /
• pp.5-15
• /
• 2012

In this study, a series of CFD (Computational Fluid Dynamics) numerical analyses were performed in order to evaluate the thermal performance of six full-scale closed-loop vertical ground heat exchangers constructed in a test bed located in Wonju. The circulation HDPE pipe, borehole and surrounding ground formation were modeled using FLUENT, a finite-volume method (FVM) program, for analyzing the heat transfer process of the system. Two user-defined functions (UDFs) accounting for the difference in the temperatures of the circulating inflow and outflow fluid and the variation of the surrounding ground temperature with depth were adopted in the FLUENT model. The relevant thermal properties of materials measured in laboratory were used in the numerical analyses to compare the thermal efficiency of various types of the heat exchangers installed in the test bed. The simulation results provide a verification for the in-situ thermal response test (TRT) data. The CFD numerical back-analysis with the ground thermal conductivity of 4 W/mK yielded better agreement with the in-situ thermal response tests than with the ground thermal conductivity of 3 W/mK.

• Physical Therapy Korea
• /
• v.14 no.3
• /
• pp.48-56
• /
• 2007

Environmental Enrichment (EE) alone is not capable of enhancing the fine digit and the forelimb functions. Therefore, we applied modified constraint-induced movement therapy (mCIMT) under the influence of EE to assess its effect on promoting improved forelimb sensorimotor functions. Focal ischemic brain injury was produced in Sprague-Dawley rats (60 rats, $250{\pm}50$ g) through middle cerebral artery occlusion (MCAO). Before MCAO induction, all rats were trained in modified limb placing tests and reaching tasks for 1 week. Then they were randomly divided into three groups: Group I: application of standard environment (SE) after MCAO induction (n=20), Group II: application of EE after MCAO induction (n=20), Group III: MCAO+EE, mCIMT and task-oriented training that was initiated at 10th day after MCAO induction (n=20). We also applied mCIMT (between 9 AM and 5 PM/daily) which included restraining the forelimb ipsilateral to the lesion using the 'Jones & Schallert' method. We assessed the change of modified limb placing, single pellet reaching test and the immunoreactivity of BDNF by immunohistochemistry (pre, 1st, 5th, 10th and 20th day). Group I showed no improved outcome, whereas group II and III significantly improved on the use of the forelimb and the immunoreactivity. The qualitative analysis of the skilled reaching test, of group III showed the greatest improvement in the fine digit and the forelimb function. These results suggest that EE combined with mCIMT is more functional in promoting enhanced fine digit and forelimb functional movements.

• Journal of the Korea Convergence Society
• /
• v.8 no.9
• /
• pp.301-309
• /
• 2017

This study analyzed the effect of cooperation activities among SMEs. In order to study empirical analysis, we classified the types of cooperation into four dimensions: technology cooperation, human resource cooperation, sales cooperation and financial cooperation. Review the role of the collaborative philosophy as a predictor. This study also analyzed the relationship between cooperation philosophy, cooperation activities and performance. The results of this study are as follows: First, the result of path analysis between cooperation philosophy and cooperation activities shows that cooperation philosophy has an important influence on technical cooperation, human resource cooperation, sales cooperation and financial cooperation. Second, the results of the relationship between cooperation activities and achievements, technical cooperation, human resource cooperation, and sales cooperation have an important influence on cooperation performance. The meaning of this study is as follows. Analyze empirical tests using the PSBP model from a partnership perspective. We are trying to verify the relationship with SMEs. Therefore, we can suggest a beneficial implication to explain the importance of cooperation activities between SMEs. Also, SME business units have a problem with technical information leakage when they form partnerships, but in order to overcome this problem, we can use cooperative philosophies and avoid negative views.

• Wind and Structures
• /
• v.16 no.4
• /
• pp.301-322
• /
• 2013

Recent major post-hurricane damage assessments in the United States have reported that the most common damages result from the loss of building roof coverings and subsequent wind driven rain intrusion. In an effort to look further into this problem, this paper presents a full-scale (Wall of Wind --WoW--) investigation of external and underneath wind pressures on roof tiles installed on a low-rise building model with various gable roofs. The optimal dimensions for the low-rise building that was tested with the WOW are 2.74 m (9 ft) long, 2.13 m (7 ft) wide, and 2.13 m (7 ft) high. The building is tested with interchangeable gable roofs at three different slopes (2:12; 5:12 and 7:12). The field tiles of these gable roofs are considered with three different tile profiles namely high (HP), medium (MP), and low profiles (LP) in accordance with Florida practice. For the ridge, two different types namely rounded and three-sided tiles were considered. The effect of weather block on the "underneath" pressure that develops between the tiles and the roof deck was also examined. These tests revealed the following: high pressure coefficients for the ridge tile compared to the field tiles, including those located at the corners; considerably higher pressure on the gable end ridge tiles compared to ridge tiles at the middle of the ridge line; and marginally higher pressure on barrel type tiles compared to the three-sided ridge tiles. The weather blocking of clay tiles, while useful in preventing water intrusion, it doesn't have significant effect on the wind loads of the field tiles. The case with weather blocking produces positive mean underneath pressure on the field tiles on the windward side thus reducing the net pressures on the windward surface of the roof. On the leeward side, reductions in net pressure to a non-significant level were observed due to the opposite direction of the internal and external pressures. The effect of the weather blocking on the external pressure on the ridge tile was negligible.