• 한국환경보건학회지
• /
• 제32권5호
• /
• pp.499-505
• /
• 2006

Bioventing efficiency was compared in a continuous and an intermittent(6hr injection and 6hr rest) air injection mode. Two lab-scale columns which packed with 5 kg of soil artificially contaminated by diesel oil were operated. The columns were maintained at the $25^{\circ}C{\pm}2.5$ in order to minimize the effect of exterior temperature variation. The flow rate of air injection mode were maintained constantly at the flow rate of 10 ml/min. The moisture of the columns was stably maintained at $60{\sim}80%$ of field capacity. The nutrient compounds were added to make C:N:P ratio as 100:10:l. The continuous and intermittent injection modes showed 67.56% and 69.63% reduction of initial TPH concentration during 90 days, respectively. Two venting modes showed similar results in the analysis of the trends of the hydrocarbon utilizing bacterial counts for operating periods. The carbon dioxide production rate of the continuous injection mode was higher than that of intermittent injection mode. The loss of diesel oil by volatilization in the continuous and intermittent injection modes were about 5% and 1%, respectively. The lower volatilization loss in the intermittent injection mode suggested that the biodegradation of TPH in the intermittent injection mode was greater than that of the continuous mode. These results suggested that the intermittent injection mode is more efficient than the continuous venting mode.

• 대한한방소아과학회지
• /
• 제14권2호
• /
• pp.1-32
• /
• 2000

It has long been known that SOAT is effective for sudden palpitation occurring unexpectedly in Oriental Medicine. However, effect of SOAT on the isolated heart has not been studied yet. The purpose of this study is to investigate the effect of SOAT on hemodynamics and ECG of isolated rat hearts induced by electrical stimulation using Langendorff perfusion apparatus for nonworking heart. SOAT extract was manufactured by water-alcohol precipitated method. Sprague-Dawley rats weighting $120{\sim}150g$ were used for the experiments, Subject animals were divided into four groups, which are consisted of 1) control(Group orally administered by normal saline 1ml for 14days), 2) sample A(Group orally administered by SOAT extract 1ml for 14days), 3) sample C(Group injected by SOAT extract 0.5ml after stimulation, 4) sample C(Group injected by SOAT extract 1ml after stimulation. To evluate the effects of SOAT on hemodynamics and ECG of isolated rat heart induced by stimulation, heart rate, left ventricular pressure, systolic power, diastolic power, coronary artery perfusion volume and ECG were measured using Langendorff apparatus in both stimulation mode(5 volts, 450 beats/min) and arrythmic mode(5 volts, 420 beats/min including 60 beats/min) The results obtained are as follows : 1. After receiving stressful electrical stimuli, isolated heart showed the heart rate, left ventricular pressure, systolic power, diastolic power, coronary artery perfusion volume were all decreased temporarily, but perfusion continued longer recovery to the control state appeared. However, the coronary artery perfusion volume diminished continuously. 2. The heart rates did not change significantly with both stimulation mode and arrhythmic mode, among experimental groups. 3. The left ventricular pressure showed with both stimulation mode and arrhythmic mode, the significant changes(p<0.05) especially in the injection sample group. In case of stimulation mode, low concentration injection group(0.5ml) was more significantly increased rather than high concentration group(1ml) and in case of arrhythmic mode, high density group(1ml) was so increased than the other(0.5ml). 4. For the systolic power and diastolic power, no significant changes were noticed in the stimulation mode, but in the arrhythmic mode of injection sample groups, significant change(p<0.05) was noticed in both systolic power and diastolic power. Specially the high concentration group(1ml) showed more significant increase than the low concentration group. 5. For the coronary artery perfusion volume, no significant change difference among sample groups was observed in both the stimulation mode and the arrhythmic mode. 6. For the ECG recordings, arrhythmia was induced by electrical stimulus of arrythmia mode and after the stimulus was removed, irregular wave appeared temporarily, but as perpusion continued, recovery to the control state was abtained like the stimulation mode. According to the above results, SOAT significantly changed the hemodynamic data from the electrically stressed, isolated hearts of connected Langendorff perfusion apparatus and we propose SOAT has the direct effects on the muscular function of heart.

• 대한방사선치료학회지
• /
• 제21권2호
• /
• pp.67-74
• /
• 2009

목 적: 전립선암 환자를 대상으로 kV 콘빔CT를 이용한 영상유도방사선치료 시 촬영조건에 따른 인체의 각 장기들에 미치는 흡수선량(absorbed dose)과 유효선량(effective dose)을 비교 평가해 보고자 한다. 대상 및 방법: 환자를 대상으로 직접 실험할 수 없으므로 인체의 구성과 조직이 흡사한 인체 모형 팬텀(Anderson rando Phantom, Alderson Research Laboratories Inc., USA)과 전산화 단층 모의치료기(Lightspeed RT CT, GE, USA)를 이용하여 국제 방사선 방호 위원회(International Commission on Radiological Protection, ICRP)에서 권고된 신체 내 중요 장기들을 묘사하였다. 팬텀 내부의 묘사된 주요 장기에 선량 측정을 위하여 열형광선량계(TLD 100 Lif rods, Harshaw Chemical Co., USA)를 1~8개 삽입한 후 팬텀의 중심을 전립선에 위치시키고, On board imager (OBI) System이 부착된 의료용 선형 가속기(Clinac iX, Varian, USA)를 이용하여 두 가지 촬영모드인 표준모드(Standard-mode, A-mode)와 저선량모드(Low-dose mode, B-mode)에서 kV 콘빔 CT 촬영을 각 3회씩 반복해서 측정하였다. 결 과: 인체 모형 팬텀을 이용하여 전립선암 환자를 대상으로 한 kV 콘빔 CT 촬영을 시행한 결과 전립선, 방광, 직장에 대한 흡수선량은 A-mode인 경우 각각 5.5 cGy/1회, 6.5 cGy/1회, 5.7 cGy/1회, B-mode인 경우 1.1 cGy/1회, 1.3 cGy/1회, 1.2 cGy/1회 결과를 보였다. 각 장기에 대한 조직가중치를 고려한 유효선량은 A-mode와 B-mode에서 19.1 mSv, 4.4 mSv의 결과로 나타났다. kV 콘빔CT 촬영 시 인체에 미치는 유효선량을 측정한 결과, 전립선암 영상유도방사선치료 시 A-mode 콘빔CT는 B-mode 콘빔CT보다 환자가 받는 선량이 약 4배 이상 증가하는 것을 알 수 있었다. 결 론: 그러므로 전립선암 영상유도방사선치료 시 환자가 받는 치료 이외의 선량을 고려했을 때 가능한 B-mode 또는 낮은 촬영 조건을 설정하여 환자가 받는 치료이외선량을 가능한 한 줄일 필요가 있다고 사료된다.

• Smart Structures and Systems
• /
• 제5권3호
• /
• pp.261-277
• /
• 2009

A fuzzy-sliding mode controller is presented to control the dynamics of semi-active suspension systems of vehicles using magneto-rheological (MR) fluid dampers. A full car model is used to design and evaluate the performance of the proposed semi-active controlled suspension system. Four mixed mode MR dampers are designed, manufactured, and integrated with four independent sliding mode controllers. The siding mode controller is designed to decrease the energy consumption and maintain robustness. In order to overcome the chattering of the sliding mode controllers, a fuzzy logic control strategy is merged into the sliding mode controller. The proposed fuzzy-sliding mode controller is designed and fabricated. The performance of the semi-active suspensions is evaluated in both the time and frequency domains. The obtained results demonstrate that the proposed fuzzy-sliding mode controller can effectively suppress the vibration of vehicles and improve their ride comfort and handling stability. Furthermore, it is shown that the "chattering" of the sliding mode controller is smoothed when it is integrated with a fuzzy logic control strategy. Although the cost function of the fuzzy-sliding mode control is a slightly higher than that of a classical LQR controller, the control effectiveness and robustness are enhanced considerably.

• 한국전자파학회논문지
• /
• 제29권12호
• /
• pp.963-968
• /
• 2018

본 논문에서는 수동소자를 이용한 소형 공통 모드 필터를 설계 및 제작하였다. 주어진 주파수 응답을 갖는 공통 모드 필터를 설계하기 위해 차동 모드와 공통 모드에서 등가회로를 분석하였다. 제안된 구조는 기존의 ${\lambda}/4$ 공진기로 구현된 필터에 비해 60 %의 크기가 감소하였다. 또한, 제작된 공통 모드 필터는 ${\mid}S_{dd11}{\mid}$, ${\mid}S_{cc21}{\mid}$, ${\mid}S_{cc11}{\mid}$ < -10 dB를 만족하는 27.5 %의 공통 모드 흡수 대역폭에서 최대 1.2 dB의 차동 모드 삽입손실과 최소 78.2 %의 공통 모드 흡수 효율을 갖는다.

• 대한기계학회논문집A
• /
• 제29권5호
• /
• pp.716-725
• /
• 2005

The method of substructure synthesis o. component mode synthesis(CMS) provides an effective means of dynamic analysis of very large and/or complex structures. In this study, residual dynamic flexibility attachment modes in hybrid component mode synthesis are considered for the purpose of exactly compensating the effect of higher order truncated modes. Following this way, the analysis accuracy of the synthesized structure can be improved effectively with less computational effort. In order to show the accuracy and effectiveness of the proposed hybrid component mode synthesis(HCMS), numerical experiments were carried out for the models of a clamped-clamped beam. The results verified the effectiveness of the proposed method.

• 전력전자학회논문지
• /
• 제24권5호
• /
• pp.334-341
• /
• 2019

This study proposes the control strategy for the seamless mode transfer of indirect current controlled parallel grid-connected inverters. Under the abnormal grid condition, the grid-connected inverter can convert the operation mode from grid-connected to stand-alone mode to supply power to the local load. For a seamless mode transfer, the time delay problems caused by the accumulated control variable error must be solved, and the indirect current control method has been applied as one of the solutions. In this study, the design of control parameters for the proportional-resonant-based triple-loop indirect current controller and the control strategy for the seamless mode transfer of parallel grid-connected inverters are described and analyzed. The validity of the proposed mode transfer method is verified by the PSiM simulation results.

• 전력전자학회논문지
• /
• 제24권5호
• /
• pp.349-355
• /
• 2019

A grid-connected inverter with critical loads should be able to supply a stable voltage to critical loads at mode change and during clearing time while detecting unintentional islanding. This study proposes a mode transfer method for a grid-connected inverter with critical loads. The proposed method, which integrates the grid-connected and islanded mode control loops into one control block, provides an autonomous and seamless mode transfer from the current control to the voltage control. Therefore, the proposed scheme can supply a stable voltage to critical loads at mode change and during clearing time. Experimental results are provided to validate the proposed method.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.73-76
• /
• 1997

A low loss x-cut LiNbO$_3$ optical waveguide was fabricated by Ti in-diffusion and the guided-mode properties and total insertion loss of pigtailing with polarization maintaining fiber(PMF) were investigated and measured at optical wavelength 15507. For formaing the waveguide, the parameters of diffusion Ti thickness, waveguide line-width, length, diffusion temperature, time and atmosphere were set 1400$\AA$, 8${\mu}{\textrm}{m}$, 3.3cm, 105$0^{\circ}C$, 8 hours and wet bubbled oxygen, respectively. and then After the polishing and pigtailing, it showed that total insertion loss was -4.1dB for TM mode, -5.5dB for TE mode, and mode size, that is, horizontal/vertical sizes were 13.87/18${\mu}{\textrm}{m}$ for TM mode, 9.61${\mu}{\textrm}{m}$/6.5${\mu}{\textrm}{m}$ for TE mode.

• 약학회지
• /
• 제43권6호
• /
• pp.776-781
• /
• 1999

Dockings of 4,5-diarylpyrroles into cyclooxygenase-1 and cyclooxygenase-2 were carried out by GOLD program. The sulfonyl groups bonded to 5-phenyl ring of 4,5-diarylpyrroles are directed to Arg513 of COX-2 and Tyr385 of COX-2 docking modes of pyrroles are different from COX-1. Tyr385 and Arg120 of COX-1 and COX-2 have been recognized as important residues. Val523 of COX-2 may be also important. A new COX-2 selective inhibitors could be designed from the docking study.