• 제목/요약/키워드: Mode Model

Search Result 4,861, Processing Time 0.039 seconds

Health Care Utilization Pattern and Its Related Factors of Low-income Population with Abnormal Results through Health Examination (저소득층 건강검진 유소견자의 의료이용 양상 및 관련요인)

  • Kwon, Bog-Soon;Kam, Sin;Han, Chang-Hyun
    • Journal of agricultural medicine and community health
    • /
    • v.28 no.2
    • /
    • pp.87-105
    • /
    • 2003
  • Objectives: The purpose of this study was to examine the health care utilization pattern and its related factors of low-income population with abnormal results through health examination. Methods: Analysed data were collected through a questionnaire survey, which was given to 263 persons who 30 years or over with abnormal results through health examination at Health Center. This survey was conducted in March, 2003. This study employed Andersen's prediction model as most well known medical demand mode and data were analysed through 2-test, and multiple logistic regression analysis. Results: The proportion of medical utilization for thorough examination or treatment among study subjects was 51.0%. In multiple logistic regression analysis as dependent variable with medical utilization, the variables affecting the medical utilization were 'feeling about abnormal result(anxiety versus no anxiety: odds ratio 2.25, 95% confidence intervals 1.07-4.75)', 'type of health security(medicaid type I versus health insurance: odds ratio 2.82, 95% confidence intervals 1.04-7.66; medicaid type II versus health insurance: odds ratio 3.22, 95% confidence intervals 1.37-7.53)', 'experience of health examination during past 2 years(odds ratio 2.39, 95% confidence intervals 1.09-5.21)' and 'family member's response for abnormal result(recommendation for medical utilization versus no response: odds ratio 4.90, 95% confidence intervals 1.75-13.75; family member recommended to utilize medical facilities with him/her versus no response: odds ratio 19.47, 95% confidence intervals 5.01-75.73)'. The time of medical utilization was 8-15 days after they received the result(29.9%), 16-30 days after they receive the result(27.6%), 2-7 days after they received the result(20.9%) in order. The most important reason why they didn't take a medical utilization was that it seemed insignificant to them(32.4%). Conclusions: In order to promote medical utilization of low-income population, health education for abnormal result and its management would be necessary to family member as well as person with abnormal result. And follow-up management program for person with abnormal result through health examination such as home-visit health care would be necessary.

  • PDF

Simultaneous Treatment of Carbon Dioxide and Ammonia by Microalgal Culture (조류배양을 통한 이산화탄소 및 암모니아의 동시처리)

  • ;;Bohumil Volesky
    • KSBB Journal
    • /
    • v.14 no.3
    • /
    • pp.328-336
    • /
    • 1999
  • A green microalga, Chlorella vulgaris UTX 259, was cultivated in a bench-scale raceway pond. During the culture, 15%(v/v) $CO_2$ was supplied and industrial wastewater discharged from a steel-making plant was used as a culture medium. In a small scale culture bottle, the microalga grew up to 1.8 g $dm^{-3}$ of cell concentration and ammonia was completely removed from the wastewater with an yield coefficient of 25.7 g dry cell weight $g^{-1}\;NH_3-N$. During the bottle-culture, microalga was dominant over heterotrophic microorganisms in the culture medium. Therefore, the amount of carbon dioxide fixation could be estimated from the change of dry cell weight. In a semi-continuous operation of raceway pond with intermittent lighting (12 h light and 12 h dark), increase of dilution rate resulted in increase of the ammonia removal rate as well as the $CO_2$ fixation rate but the ammonia removal efficiency decreased. Ammonia was not completely removed from the medium (wastewater) of raceway pond which was operated in a batch mode under a light intensity up to 20 klux. The incomplete removal of ammonia was believed due to insufficient light supply. A mathematical model, capable of predicting experimental data, was developed in order to simulate the performance of the raceway pond under the light intensity of sun during a bright daytime. Simulation results showed that the rates of $CO_2$ fixation and ammonia removal could be enhanced by increasing light intensity. According to the simulation, 80 mg $dm^{-3}$ of ammonia in the medium could be completely removed if the light intensity was over 60 klux with a continuous lighting. Under the optimal operating condition determined by the simulation, the rates of carbon dioxide fixation and ammonia removal in the outdoor operation of raceway pond were estimated as high as $24.7 g m^{-2} day^{-1}$ and $0.52 g NH_3-N m^{-2} day^{-1}$, respectively.

  • PDF

A Study on the Hull-dimension of 89 ton class Stow-net Vessel with Stern-fishing (89톤급 선미식 안강망어선의 선형치수에 관한 연구)

  • Park, Je-Ung;Lee, Hyeon-Sang
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.33 no.3
    • /
    • pp.159-165
    • /
    • 1997
  • This paper presents the optimum dimension of 89 ton class stow-net vessel with stern-fishing. The model of basic design is developed by using the optimization techniques referring to objective function and numerous constraints as follows; speed, fishing quantity, fishing days, catch per unit effort(CPUE), and weight/ratio of main dimensions, etc. Thus, the basic design of stow-net fishing vessel is built up by using the optimization of the design variables called the economic optimization criteria, and the objective function represents the criterion which is cost benefit ratio(CBR). The main conclusions are as follows. 1. S/W for decision of optimum hull size is developed in 89 ton class stow-net fishing vessel which is constructed with optimization of the design variables called the economic optimization criteria. 2. For optimum ship dimensions in 89 ton class stow-net fishing vessel, the hull dimensions can be obtained in the range of L= 27.3m, B = 6.6m, D = 2.80m, Cb = 0.695, T/D = 0.80, $\Delta$(displacement)=281.7ton with 10 knots.

  • PDF

Cost-Benefit Analysis on Rubella Vaccination Policy (풍진 예방접종사업의 비용-편익분석)

  • Shin, Young-Jeon;Choi, Bo-Youl;Park, Hung-Bae;Moon, Ok-Ryun;Yoon, Bae-Joong
    • Journal of Preventive Medicine and Public Health
    • /
    • v.27 no.2 s.46
    • /
    • pp.337-365
    • /
    • 1994
  • Rubella is a viral disease with mild constitutional symptoms and generalized rashes. In childhood, it is an inconsequential illness, but when it occurs during early pregnant period, there are significant risks of heart defects, cataract, mental retardation to the fetus. The series of congenital defects induced by rubella is called 'congenital rubella syndrome'. Many research have been performed to find out more effective prevention program on rubella. The objectives of this study are, first, to calculate the incidence rate of acute rubella infection and congenital rubella syndrome in Korea, second, to evaluate economic efficiency of several rubella vaccination policies and to offer data for the most reasonable decision on vaccination policy. Study populations are 663,312 children of one year-old in 1992. The author has performed cost-benefit analyses according to the three vaccination policies-U.S.A.'s. U.K.'s and Sweden's. In this Study, the author got the incidence rate of acute rubella infection using the catalytic model. In the meantime, the author used 50 per 100,000 live births as the incidence rate of congenital rubella syndrome. The discount rate used in this study was 5 percent per annum. The sensitivity analyses were done with different discount rates (4%, 7%) and different incidence rate of congenital rubella syndrome (10,100 per 100,000 live births) : The study results are as follows: 1. Without vaccination, lifetime expenditures per patient for acute rubella infeciton amount to 14,822 won and the total expenditures to about 3.1 billion won. Meanwhile, lifetime expenditures per patient for congenital rubella syndrome amount to about 91 million won and the total expenditures to about 16.3 billion won without vaccination. 2. The cost of vaccination for a child of one year old was 2,322 won and the total cost for the one year old children was about 1.5 billion won (American style). The cost for vaccination of female children at fifteen was about 339 million won (Birtish style). And the cost of vaccination at one for both sex and female children at fifteen was about 1.9 billion won (Swedish style). 3. The benefit to cost ratios of vaccination of female children at fifteen that is the british mode of rubella vaccination, was 60.0 at the level of 80% population coverage and 48.6 at 100% coverage. It shows much higher benefit to cost ratio than those of the other two vaccination policies. 4. Both net benefits of vaccination at one (American style) and that of vaccinations at one and fifteen (Swedish style) range from about 17.0 billion to 17.8 billion won, those were larger than that of vaccinations of female children at fifteen (Birtish style, about 16.0 billion). 5. In marginal cost-benefit analysis of only additional program of revaccination, the benefit to cost ratios were 3.6 (80% coverage rate) or 0.6 (100% coverage rate). It implies that additional program was less efficient or inefficient. 6. In sensitivity analysis with different discount rates(4% or 7%) and different incidence rates of congenital rubella syndrome (10 or 100 per 100,000 live births), the benefit to cost ratios has fluctuated in wide range. However, all the ratios of vaccination of female children at fifteen were higher than those of the others. Even under the most conservative assumption, the benefit to cost ratios of all the rubella vaccination policies were higher than 3.3. In conclusion, all the rubella vaccination policies found to be cost-effective and particularly the vaccination of female children at fifteen was strongly recommended.

  • PDF

The Effect of Surface Defects on the Cyclic Fatigue Fracture of HEROShaper Ni-Ti rotary files in a Dynamic Model: A Fractographic Analysis (Fractographic 분석을 통한 HEROShaper 니켈티타늄 전동 파일의 피로파절에 미치는 표면결함의 역할)

  • Lee, Jung-Kyu;Kim, Eui-Sung;Kang, Myoung-Whai;Kum, Kee-Yeon
    • Restorative Dentistry and Endodontics
    • /
    • v.32 no.2
    • /
    • pp.130-137
    • /
    • 2007
  • This in vitro study examined the effect of surface defects on cutting blades on the extent of the cyclic fatigue fracture of HEROShaper Ni-Ti rotary files using fractographic analysis of the fractured surfaces. A total of 45 HEROShaper (MicroMega) Ni-Ti rotary flies with a #30/.04 taper were divided into three groups of 15 each. Group 1 contained new HEROShapers without any surface defects. Group 2 contained HEROShapers with manufacturing defects such as metal rollover and machining marks. Croup 3 contained HEROShapers that had been clinically used for the canal preparation of 4-6 molars A fatigue-testing device was designed to allow cyclic tension and compressive stress on the tip of the instrument whilst maintaining similar conditions to those experienced in a clinic. The level of fatigue fracture time was measured using a computer connected the system. Statistical analysis was performed using a Tukey's test. Scanning electron microscopy (SEM) was used for fractographic analysis of the fractured surfaces. The fatigue fracture time between groups 1 and 2, and between groups 1 and 3 was significantly different (p<0.05) but there was no significant difference between groups 2 and 3 (p>0.05). A low magnification SEM views show brittle fracture as the main initial failure mode At higher magnification, the brittle fracture region showed clusters of fatigue striations and a large number of secondary cracks. These fractures typically led to a central region of catastrophic ductile failure. Qualitatively, the ductile fracture region was characterized by the formation of microvoids and dimpling. The fractured surfaces of the HEROShapers in groups 2 and 3 were always associated with pre-existing surface defects. Typically, the fractured surface in the brittle fracture region showed evidence of cleavage (transgranular) facets across the grains, as well as intergranular facets along the grain boundaries. These results show that surface defects on cutting blades of Ni-Ti rotary files might be the preferred sites for the origin of fatigue fracture under experimental conditions. Furthermore this work demonstrates the utility of fractography in evaluating the failure of Ni-Ti rotary flies.

Legal Relations of the Contract of International Carriage of Goods by Air (국제항공화물운송계약(國際航空貨物運送契約)의 법률관계(法律關係) -화주(貨主)의 권리의무(權利義務)를 중심(中心)으로-)

  • Lee, Kang-Bin
    • The Korean Journal of Air & Space Law and Policy
    • /
    • v.1
    • /
    • pp.193-222
    • /
    • 1989
  • The purpose of this study is to review the rights and duties of cargo owners, the party to the contract of international carriage of goods by air under the Warsaw Convention System and the IATA conditions. It is generally known that air freight is the most-cost mode of transportation. However, should there be considerations of total distribution cost, the use of air freight leads exporters to be advantageous in physical distribution. The Warsaw Convention System defined and limited the rights and duties of cargo owners and air carriers paticipating in the international carriage of goods, but it does not regulate every aspect of air transportation. Therefore, the unregulated parts are governed by national laws and by individual contracts of carriage. The International Air Transport Association(lATA), a worldwide organization of airlines, has formulated model conditions of contract for the carriage of cargo. These models are not uniformly followed but they serve as a basis for many of the individual standard form of contracts prepared by air carriers. The contract of air carriage of goods is a contract of adhesion, 'the consignor recognizing and accepting the conditions laid down by the carrier'. There are consignors and carriers as the parties to the contract of international carriage of goods. In addition to his basic right, implied in Warsaw Convention Article 18 and 19, to require devery of the goods in good condition and at the date agreed upon, the consignor has the right to dispose the goods in the course of the journey up to the moment when the consignee is entitled to require delivery. If it is impossible to carry out the orders of the consignor, the carrier must so inform him forthwith. The right conferred on the consignor ceases at the moment when that of the consignee begins in accordance with Warsaw Convention Article 13. Nevertheless, if the consignee declines to accept the air waybill or the goods, or if he cannot be communicated with, the consignor resumes his right of disposition. Unless it is otherwise agreed, it is the duty of the carrier to give notice to the consignee as soon as the goods arrive. The consignee is entitled, on arrival of the goods at the place of destination, to require the carrier to hand over to him the air waybill and to deliver the goods to him, on payment of the charges due and on complying with the conditions of carriage set out in the air waybill. The air waybill is supposed to be made out by the consignor. If the carrier makes it out, he is deemed, subject to proof to the contrary, to have done so on behalf of the consignor, whether there is one air waybill or several, each must be made out in three original parts. The first is for the carrier, the second is for the consignee, and the the third is handed to the consignor when the shipment has been accepted. The consignor is responsible for the correctness of the particulars and statement concerning the cargo appearing in the air waybill. Each of the original parts of the air waybill has evidential value and possession of his part is a condition for the exercise by the consignor or consignee of his rights under the contract of carriage. Hague Protocol set forth in Article 9 that nothing in this. Convention prevents the issue of a negotiable air waybill, but Montreal Additional Protocol No. 4 deleted this article. All charges applicable to a shipment are payable in cash at the time of acceptance thereof by the carrier in case of a prepaid shipment or at the time of delivery thereof by the carrier in case of a collect shipment. The carrier shall have lien the cargo for unpaid charges and, in the event of non-payment thereof, shall have the right to dispose of the cargo at public or private sale and pay itself out of the proceeds of such sale any and all such amounts. In conclusion, the Warsaw Convention System has the character of ambiguity in various respects, not only in the part of the forms of documents but also in conditions of contract. Accordingly, the following propositions might be considered: (1) If the carrier does not obey the orders of the consignor for the disposition of the goods without proper reasons, he will be liable strictly for any damage which may be caused thereby to the cargo owner. The special agreement and carrier's conditions of carriage which limit unreasonably the consignor's right of disposition of the goods will be nullified. (2) The instrument of the Warsaw Convention System which is not yet in force(Montreal Additional Protocol No. 4) would considerably simplfy the processing and keeping of computerized records of the carriage. Until this instrument enters into force, the airlines will be faced with practical problems preventing them to substitute computerized data processing techniques for the formal issuance of the documents. Accordingly, Montreal Additional Protocol No. 4 should become effective as soon as posisble. From a practical point of view in the international trade, the issuance of negotiable air waybill should be permitted for the security of the bank.

  • PDF

Determination of cross section of composite breakwaters with multiple failure modes and system reliability analysis (다중 파괴모드에 의한 혼성제 케이슨의 단면 산정 및 제체에 대한 시스템 신뢰성 해석)

  • Lee, Cheol-Eung;Kim, Sang-Ug;Park, Dong-Heon
    • Journal of Korea Water Resources Association
    • /
    • v.51 no.9
    • /
    • pp.827-837
    • /
    • 2018
  • The stabilities of sliding and overturning of caisson and bearing capacity of mound against eccentric and inclined loads, which possibly happen to a composite caisson breakwaters, have been analyzed by using the technique of multiple failure modes. In deterministic approach, mathematical functions have been first derived from the ultimate limit state equations. Using those functions, the minimum cross section of caisson can straightforwardly be evaluated. By taking a look into some various deterministic analyses, it has been found that the conflict between failure modes can be occurred, such that the stability of bearing capacity of mound decreased as the stability of sliding increased. Therefore, the multiple failure modes for the composite caisson breakwaters should be taken into account simultaneously even in the process of deterministically evaluating the design cross section of caisson. Meanwhile, the reliability analyses on multiple failure modes have been implemented to the cross section determined by the sliding failure mode. It has been shown that the system failure probabilities of the composite breakwater are very behaved differently according to the variation of incident waves. The failure probabilities of system tend also to increase as the crest freeboards of caisson are heightening. The similar behaviors are taken place in cases that the water depths above mound are deepening. Finally, the results of the first-order modal are quite coincided with those of the second-order modal in all conditions of numerical tests performed in this paper. However, the second-order modal have had higher accuracy than the first-order modal. This is mainly due to that some correlations between failure modes can be properly incorporated in the second-order modal. Nevertheless, the first-order modal can also be easily used only when one of failure probabilities among multiple failure modes is extremely larger than others.

Spatial Characteristic in Food Sources for Benthic Invertebrates in an Estuary Tidal flat: Carbon and Nitrogen Stable Isotope Analyses (안정동위원소 비를 이용한 하구 갯벌에 있어서 저서 무척추 동물의 유기물 기원의 공간적 특성)

  • Shin, Woo-Seok;Lee, Yong-Doo
    • Journal of the Korean Society for Marine Environment & Energy
    • /
    • v.13 no.1
    • /
    • pp.53-59
    • /
    • 2010
  • The spatial variability in the food chain structure of an estuarine environment(Nanakita estuarine, Japan) was investigated using stable carbon and nitrogen isotope. Potential organic matter sources(TP:Terrstrial Plant, MPOM:Marine particulate organic matter, BMA:Benthic microalgae, EPOM:Estuarine particulate organic matter), sedimentary organic matter and benthic invertebrates(Nuttallia olivacea and Nereidae) were sampled at four locations with different tidal flat types(e.g. sanddy, sanddy-muddy and muddy). The main objective of the present study was to determine food sources of Nuttallia olivacea and Nereidae along with small-scale spatial variability within the community of benthic invertebrates. TP(${\delta}^{13}C=-26.6{\pm}0.76$ and ${\delta}^{15}N=2.7{\pm}0.31$) and EPOM(${\delta}^{13}C=-25.5{\pm}0.13$ and ${\delta}^{15}N=5.2{\pm}0.46$) were isotopically distinct from BMA(${\delta}^{13}C=-16.3$ and ${\delta}^{15}N=6.2$) and MPOM(${\delta}^{13}C=-19.6{\pm}0.08$ and ${\delta}^{15}N=8.9{\pm}1.70$). ${\delta}^{13}C$ values of sedimentary organic matter showed a distinct gradient in the range of -27.4 to -22.8‰ with a declining trend from the upstream to the downstream stations. The stable carbon and nitrogen isotope values of benthic invertebrates in the study site was -22.8 to -18.4‰ for ${\delta}^{16}C$ and 8.1 to 11.9‰ or ${\delta}^{15}N$, respectively. Mixing model(Isosource) calculations based on stable isotope measurements showed that benthic invertebrates of Nuttallia olivacea and Nereidae were found to be dominated by MPOM and BMA in stations. Whereas, TP and EPOM showed little influence to benthic invertebrates. The current result suggests that the different contribution for benthic invertebrates should be affected by both seasonal variation and physical factor among stations.

Estimation of Genetic Parameters for Reproductive Traits in Yorkshire (요크셔종의 번식형질에 대한 유전모수 추정)

  • Song, Kwang-Lim;Kim, Byeong-Woo;Roh, Seung-Hee;Sun, Du-Won;Kim, Hyo-Sun;Lee, Deuk-Hwan;Jeon, Jin-Tae;Lee, Jung-Gyu
    • Journal of agriculture & life science
    • /
    • v.44 no.5
    • /
    • pp.55-64
    • /
    • 2010
  • This study was conducted to estimate genetic parameters for reproductive traits using multivariate animal models in Yorkshire breed. For the study, 4,989 records for litter traits collected between the year 2001 and 2005 from Yorkshire pigs in K GGP were used. The effects of environmental factors such as farrowing year, parity, weaning to estrus interval (WEI), and suckling period were statistically significant (p<0.05), but farrowing season was not significant, for reproductive traits. The estimates genetic correlations and phenotypic correlations in total number of born and number of suckling, was shown to highly correlated. The genetic correlations were higher than phenotypic correlation. The estimates of heritabilities for reproductive traits, considering permanent environment effects (PE) were much lower than those obtained when permanent environment effects were not considered (NPE) in the model. The estimates of heritabilities were 0.240 and 0.076 for total number of born and 0.187 and 0.096 for number of suckling in NPE, and PE, respectively. These results itivcate that PE should be considered in the statistical mode to estimate more acco ate breeding values.

DEM Generation over Coastal Area using ALOS PALSAR Data - Focus on Coherence and Height Ambiguity - (ALOS PALSAR 자료를 이용한 연안지역의 DEM 생성 - 긴밀도와 고도 민감도 분석을 중심으로 -)

  • Choi, Jung-Hyun;Lee, Chang-Wook;Won, Joong-Sun
    • Korean Journal of Remote Sensing
    • /
    • v.23 no.6
    • /
    • pp.559-566
    • /
    • 2007
  • The generation of precise digital elevation model (DEM) is very important in coastal area where time series are especially required. Although a LIDAR system is useful in coastal regions, it is not yet popular in Korea mainly because of its high surveying cost and national security reasons. Recently, precise DEM has been made using radar interferometry and waterline methods. One of these methods, spaceborne imaging radar interferometry has been widely used to measure the topography and deformation of the Earth. We acquired ALOS PALSAR FBD mode (Fine Beam Dual) data for evaluating the quality of interferograms and their coherency. We attempted to construct DEM using ALOS PALSAR pairs - One pair is 2007/05/22 and 2007/08/22, another pair is 2007/08/22 and 2007/10/22 with respective perpendicular baseline of 820 m, 312m and respective height sensitivity of 75 m and 185m at southern of Ganghwa tidal flat, Siwha- and Hwaong-lake over west coastal of Korea peninsula. Ganghwa tidal flat has low coherence between 0.3 and 0.5 of 2007/05/22 and 2007/08/22 pair. However, Siwha-lake and Hwaong-lake areas have a higher coherence value (From 0.7 and 0.9) than Ganghwa tidal area. The reason of difference coherence value is tidal condition between tidal flat area (Ganghwa) and reclaimed zone (Siwha-lake and Hwaong-lake). Therefore, DEM was constructed by ALOS PALSAR pair over Siwha-lake and Hwaong-lake. If the temporal baseline is enough short to maintain the coherent phases and height sensitivity is enough small, we will be able to successfully construct a precise DEM over coastal area. From now on, more ALOS PALSAR data will be needed to construct precise DEM of West Coast of Korea peninsular.