• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.164-164
• /
• 2000

Since Au-Pt alloys have various atomic structures depending upon composition and annealing temperature, it is very interesting to investigate the electronic structures of alloys. We studied the changes of the electronic structure I the Au-Pt alloys by x-ray absorption near edge spectroscopy (XANES). Two kinds of Au-Pt alloy samples were prepared by arc melting methods and ion-beam-mixing technique. The Pt L2, 3-edge and Au L2, 3-edge X-ray absorption spectra (XPS) were measured with the electron yield mode detector at the 3C1 beam line of the Pohang Light Source (PLS). It was found that there was a substantial decrease in the area of the Pt L2, 3 white lines compared with that of pure Pt. The observed decrease in white line area was attributed to an increase in the number of pure Pt. The observed decrease in white line area was attributed to an increase in the number of 5d-electrons at the Pt site upon alloy formation. However, the Au L2, 3 edge spectra for Au-Pt alloys are all similar to that of pure Au. This implies that the 5d hole count of Au is not changed by alloy formation with Pt.

• Computers and Concrete
• /
• v.33 no.3
• /
• pp.241-250
• /
• 2024

This article investigates the thermal and post-buckling problems of graphene platelets reinforced metal foams (GPLRMF) beams with initial geometric imperfection. Three distribution forms of graphene platelet (GPLs) and foam are employed. This article utilizes the mixing law Halpin Tsai model to estimate the physical parameters of materials. Considering three different boundary conditions, we used the Euler beam theory to establish the governing equations. Afterwards, the Galerkin method is applied to discretize these equations. The correctness of this article is verified through data analysis and comparison with the existing articles. The influences of geometric imperfection, GPL distribution modes, boundary conditions, GPLs weight fraction, foam distribution pattern and foam coefficient on thermal post-buckling are analyzed. The results indicate that, perfect GPLRMF beams do not undergo bifurcation buckling before reaching a certain temperature, and the critical buckling temperature is the highest when both ends are fixed. At the same time, the structural stiffness of the beam under the GPL-A model is the highest, and the buckling response of the beam under the Foam-II mode is the lowest, and the presence of GPLs can effectively improve the buckling strength.

• Journal of Fashion Business
• /
• v.11 no.6
• /
• pp.87-100
• /
• 2007

This study aims at analyzing the characteristics of deconestructionism expressed in Issey Myake's fashion who is one of the most creative designers in the world. Method and contents of this study are as follows. Through the review of literatures, three major categories such as interminacy of meaning, decentring, and intertextuality and eight subcategories have been identified as major features of deconestructionism. These subcategories for content analysis were selected to examine the characteristics of deconstructionism expressed in Issey Myake's design in depth. Interminacy of meaning was divided into unstructured and unconstructed factors while decentring into qualities of cross-gender, subculture, anti-fashion, and post-humanism. Lastly, intertextuality was classified into factors of disordered mixing mode and mixed styles. Materials for analysis were chosen from total 349 designs on the website,www.firstview.com, which carries Issey Miyake's collection from 2002 S/S through 2006 F/W. 2 fashion major analysts including the researcher participated in 1st analysis and two another fashion major analysts participated in 2nd analysis. The final level of consistency between analysts was over 97% for all categories. The data analysis quantitatively evaluates the frequency of each category and qualitatively evaluates the characteristics of design. The result is as follows. First, the avant-garde facets of inter-textuality are most prominent. In particular, Miyake has introduced the various novelly textiles to fashion and employed the mixtured styles, not to copy them but to create hybrid designs by using pastiches and mixing fashion styles. Moreover, he has used various fabrics in order to inflict shock and contrast but still create subtle harmony, thus enriching his fashion. Second, the indeterminacy of meaning is the second most frequently shown facet of Miyake's fashion design. Miyake has employed unconstructed expression techniques, which has projected unusual images free from basic forms of designs and also has used the unstructured styles which dismantle harmony and balance-the common rule of design. He has made a new attempt to acknowledge clothing as an expressive artwork by allowing clothes to take a complete form when a person actually wears them. He has demonstrated a unique perspective on cloth construction and presented a love for artistic collaboration in the development of his collections A distinct manufactured aesthetic is exaggerated, even hyperbolic. Thirdly, the aspects of decentralization were also shown in Miyake's design, however, it has been visibly decreased after 2002 S/S.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.90-96
• /
• 2018

Tracer experiments were carried out on two laboratory modes, "without media mode" and "with media mode", to examine the hydraulic characteristics of the anaerobic fluidized bed bioreactor (AFBR). For both configurations, a formula was derived for the hydraulics and data interpretation to obtain the actual characteristics of the reactor. The dispersion model is based on the assumption that carriers are non-reacting and the dispersion coefficient is constant. The model represents the one-dimensional unsteady-state concentration distribution of the non-reacting tracer in the reactors. The experimental results showed that the media increased the mixing conditions in the reactor considerably. For the reactor without media, in the range tested, the dispersion coefficient was at least an order of magnitude smaller than that of the reactor with media. Advective transport dominates and the flow pattern approaches the plug flow reactor (PFR) regime. The dispersion coefficient increased significantly as us, the superficial liquid velocity, was increased proportionally to 0.82cm/s. On the other hand, for the reactor with media, the flow pattern was in between a PFR and a completely mixed flow reactor (CMFR) regime, and the dispersion coefficient was saturated at us=0.41cm/s, remaining relatively constant, even at us=0.82cm/s. The dispersion coefficient depends strongly on the liquid Reynolds number (Re) or the particle Reynolds number (Rep) over the range tested.

• Journal of the Korea Concrete Institute
• /
• v.15 no.4
• /
• pp.549-556
• /
• 2003

Various researches on the application of polymer dispersions to the cement mortar and concrete have been practised in many countries like America, Japan and Germany and so on because of high performance and good modification effect of these. In this study, SBR, Polymer dispersion that widely used in situ is employed that the self-flowability may be induced in the cemen mortar. In order to comprehend and investigate the modification of cement mortar with self-flowability by SBR and properties and fracture mode of adhesive strength in tension of that, experimental parameter was set as SBR solid-Cement ratio(S/C) and Cement:Fine aggregate(C:F) and the experiments such as Unit weight, Flow, Consistency change, Crack resistance and Segregation that inform on the general properties have been done. In addition of that, Adhesion in tension is measured with a view to comprehending the properties and fracture mode in tensile load. Consistency change of cement mortar modified by SBR did grow better as the ratio of SBR solid-Cement increased and was much superior to that of resin based flooring such as polyurethane and epoxy which recorded the loss of consistency in 90min. after mixing. Adhesive strength in tension increased with continuity in the curing age and showed the maximum in case of C:F=1:1 and S/C=20%. As the increase of curing age, the fracture mainly happened in the concrete substrate and the interface between the specimen and concrete substrate.

• Journal of the Korean Society of Costume
• /
• v.13
• /
• pp.51-72
• /
• 1989

In this thesis, I examined the mental, philosophical aspects and the aesthetic sense of our ancestors through the study of the patterns pictured in the mural paintings of Koguryo dynasty's old tomb. To view the mode of construction in Koguryo dynasty from present angle, the detailed analysis of the patterns was done. As a result, I could fully understand the formative consciousness of our nation. 1. I defined the process of transition of the mural paintings by putting some 70 mural aintings into the form of a diagram. 2. The cultural aspects of the mural paintings in Koguryo dynasty were characterized by the fusion of our primitive religion and Buddhism, Confucianism and Taoism which were introduced from China. From this fact, I could inferred that Koguryo people were giving off the strong desire for the faith by means of the mural paintings. Further more I found that configuration of the patterns such as religious elements. 3. The types of the patterns were classified into four types, this is, geometric type, natural type, cultural type and abstract type, Among these types, geometric type and natural type were nonsymbolic in nature but became cultured and abstracted in course of time. cultural pattern and abstract pattern got the symbolic meaning in the long run. Of all the constitution of the patterns represented in the mural paintings such as repeat constitution, left and right symmetric constitution, top and bottom symmetric constitution and rotary symmetric constitution, the left and right symmetric constitution was mainly used and some monotony of left and right symmetric constitution. The analysis of motif which was got from the mode of the patterns showed that the mixing of symbolic and nonsymbolic patterns made it possible to regard the separate symbol as compound in nonsymbolic patterns and the combination between nonsymbolic patterns ensured the understanding of other patterns in certain cases. Our ancestors made great efforts to transmit certain meaning symbolically. Also to heighten the symbolism, they drew the meangless patterns firstly and then appended meaning to those patterns secondly. Furthermore, they offered the background to the patterns comblined with symbolism, so that meaning transmission was clarified at last. As mentioned above, the patterns shown in the mural paintings of Koguryo dynasty's old tomb were characterized by natural beauty. And natural beauty was found out clearly in the form and constitution of the patterns. Therefore I concluded that our nation's religious, philosophical tradition was acted on the patterns strongly.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.7 no.3
• /
• pp.163-170
• /
• 2002

This report describes the use of a transtubular bioreactor to study the relative effects of diffusion versus perfusion of medium on antibody production by a hybridoma cell line. The study was performed with a high-density cell culture maintained in a serum-free, low-protein medium for 77 days. It was determined that the reactor possessed a macro-mixing pattern residence time distribution similar to a continuous stirred tank reactor (CSTR), However, due to the arrangement of the medium lines in the reactor, the flow patterns for nutrient distribution consist of largely independent medium path lengths ranging from short to long. When operated with cyclic, reversing, transtubular medium flow, some regions of the reactor (with short residence times) are more accessible to medium than others (with long residence times). From this standpoint, the reactor can be divided into three regions: a captive volume, which consists of medium primarily delivered via diffusion; a lapped volume, which provides nutrients through unilateral convection; and a swept volume, which operates through bilateral convection. The relative sizes of these three volumes were modified experimentally by changing the period over which the direction of medium flow was reversed from 15 min (larger captive volume) to 9 h (larger swept volume). The results suggest that antibody concentration increases as the size of the diffusion-limited (captive) volume is increased to a maximum at around 30 min with a sharp decrease thereafter. As reflected by changes in measured consumption of glucose and production of lactate, no significant difference in cellular metabolism occurred as the reactor was moved between these different states. These results indicate that the mode of operation of the transtubular bioreactor may influence antibody productivity under serum-free, low-protein conditions with minimal effects on cellular metabolism.

• Archives of design research
• /
• v.19 no.1 s.63
• /
• pp.59-68
• /
• 2006

Scarf has played an important role not only as keeping warm of human body but also as accessory of clothes. These days with taking a growing interest of accessory, scarf had thrown off a subsidiary part and gradually had a leading place which guides the overall mode of fashion. Because scarf design of Korea does not get out of imitation step of foreign countries brands it is necessary to develop the scarf design which can show the cultural identity and originality of Korea in international society. Therefore in this study, I chose lotus flower patterns expressed on Buncheon pottery and Korean traditional patchwork cloth as the subject material of scarves design development, and my intention for this study is to develop scarves designs of Korean images by adding modern scenes. For that, first I researched lotus flower patterns expressed on Buncheon pottery and Korean traditional patchwork cloth. Among those materials, I selected to had been presented modern image. And by using computer design program of adobe illustrator 10.0 I designed the basic patterns of three types and developed the square scarves design and rectangle scarves design with those.

• Aerospace Engineering and Technology
• /
• v.6 no.1
• /
• pp.128-135
• /
• 2007

Combustion characteristics of full-scale gas generators were studied experimentally by changing the injector number installed at the injector head. Three full-scale gas generators were utilized; they have same total mass flow rate but mass flow rates per injector are different. Thirteen, nineteen and thirty seven injectors, which have internal-mixing and double-swirl characteristics, are distributed in injector heads, respectively. The results showed that pressure fluctuations in the gas generators with 13 and 19 injectors didn't occur around longitudinal resonant frequency, however longitudinal-mode pressure fluctuation appeared slightly in the gas generator with 37 injectors. As the number of injectors increased, deviations of temperature distribution in the combustion chamber decreased gradually, but the damage of injector LOx posts became a little severe.

• Journal of the Korean Society of Costume
• /
• v.40
• /
• pp.121-135
• /
• 1998

The purpose of this thesis is to study the social and cultural background and characteristic of neo-classicism which appered in the modern fashion of the pluralistic society of the latter half of 20th century to understand that the product of societh such as fashion mode reflects the situation of society and culture. For this purpose, documentary studies about the concept and background of neo-classicism, were preceded, and analyzed the occurrence background and characteristic of neo-classicism of the modern fashion after the 1980's, which showed up in post-modernism fashion. The characteristics of neo-classicism expressed in modern fashion is as follows; First, they are expressed in modern fashion in forms of simplicity by means of minimizing process of sewing or ornamenting and deletion of dart. Second, retro-style in terms of concerning of the past, is featured in various styles of Greco-roman drapery and expresed in forms of mixing clothing elements of modern and classic in modern times. Third, the trend of ecology in terms of interest of the nature and the thought that the spiritual world is more important than the material world. It is expressed by using natural elements adn natural materials, which wanted to get the nature and human into one and search for the losed nature of modern men. Fourth, the pursuit of the beauty of the human body, is expressed in forms of body-prioity style through using see-through or elastic materials, which is knit, lycra, spandex, etc. In conclusion, we can recognize that the social product reflects social and cultural situation. And the characteristic of neo-classicism has the meaning of harmonizing the human and nature and the returing the humanity.