• 한국정보통신학회논문지
• /
• 제13권12호
• /
• pp.2671-2676
• /
• 2009

EMD(Empirical mode decomposition) 방법은 시간-주파수 분석의 새로운 방법으로 적응적이며 효율적으로 신호를 분해한다. EMD는 신호 그 자체에 의해 정의된 IMFs(Intrinsic mode functions)로 명명되는 함수의 집합으로 분해되며, 분해된 IMFs는 원신호의 고유한 속성을 보존하므로 기저함수 및 필터로 사용될 수 있다. EMD 방법에 의한 분해는 신호의 지역적인 시간 스케일 특성에 기반을 두고 있으므로 비선형(non-linear) 비정상(non-stationary) 신호처리에 적합하며 ECG와 같은 생체 신호처리에 유용하다. 본 논문은 EMD 방법을 이용하여 ECG 신호를 분해하고 분해된 신호의 특성을 이용하여 잡음 제거 필터를 구현하였다. 전통적인 저주파 필터가 퓨리에 변환을 이용하여 주파수 영역에서 신호를 해석하는 것과 달리 EMD 방법은 시간 영역에서 필터링하여 신호의 속성을 유지한다. 영상 향상의 정도를 측정하기 위한 PRMD와 SSR 평가지수를 사용하여 제안된 기법과 전통적인 저주파 필터의 결과를 비교 제시하였다.

• 한국추진공학회지
• /
• 제21권2호
• /
• pp.9-17
• /
• 2017

비정상 충격파 유도연소의 주기적 압력 진동 특성을 연구하기 위하여 DMD 방법을 적용하였다. Lehr의 충격파 유도 연소 실험을 기반으로 수치적인 연구를 수행하였다. Lehr의 실험을 4 수준의 격자를 이용하여 수치적으로 모사하였으며, FFT 결과로부터 430-435 kHz의 주파수가 계산되었다. 실험 결과는 약 425 kHz로 해석 결과와 유사한 것을 확인하였다. FFT 해석에서 도출되지 않은 저주파 특성을 파악하기 위해 dynamic mode decomposition (DMD) 방법을 적용하였다. 여러 가지 모드 주파수가 계산되었고, 연소불안정 평가 인자 중 하나인 damping coefficient를 도출하여 안정/불안정성을 평가하였다.

• Smart Structures and Systems
• /
• 제22권5호
• /
• pp.621-630
• /
• 2018

Boundary effect and the noise robustness are the two crucial aspects which affect the effectiveness of the damage localization based on the mode shape measurements. To overcome the boundary effect problem and enhance the noise robustness in damage detection, a simple damage localization method is proposed based on the Singular Value Decomposition (SVD) for the mode shape of composite plates. In the proposed method, the boundary effect problem is addressed by the decomposition and reconstruction of mode shape, and the noise robustness in enhanced by the noise filtering during the decomposition and reconstruction process. Numerical validations are performed on plate-like structures for various damage and boundary scenarios. Validations show that the proposed method is accurate and effective in the damage detection for the two-dimensional structures.

• Smart Structures and Systems
• /
• 제3권4호
• /
• pp.423-437
• /
• 2007

The empirical mode decomposition (EMD) method is well-known for its ability to decompose a multi-component signal into a set of intrinsic mode functions (IMFs). The method uses a sifting process in which local extrema of a signal are identified and followed by a spline fitting approximation for decomposition. This method provides an effective and robust approach for decomposing nonlinear and non-stationary signals. On the other hand, the IMF components do not automatically guarantee a well-defined physical meaning hence it is necessary to validate the IMF components carefully prior to any further processing and interpretation. In this paper, an attempt to use the EMD method to identify properties of nonlinear elastic multi-degree-of-freedom structures is explored. It is first shown that the IMF components of the displacement and velocity responses of a nonlinear elastic structure are numerically close to the nonlinear normal mode (NNM) responses obtained from two-dimensional invariant manifolds. The IMF components can then be used in the context of the NNM method to estimate the properties of the nonlinear elastic structure. A two-degree-of-freedom shear-beam building model is used as an example to illustrate the proposed technique. Numerical results show that combining the EMD and the NNM method provides a possible means for obtaining nonlinear properties in a structure.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.699-704
• /
• 2004

Empirical mode decomposition(EMD) method has been recently proposed to analyze non-linear and non-stationary data. This method allows the decomposition of one-dimensional signals into intrinsic mode functions(IMFs) and is used to calculate a meaningful multi-component instantaneous frequency. In this paper, it is assumed that each mode of damped vibration signal could be well separated in the form of IMF by EMD. In this case, we can have a new powerful method to calculate natural frequencies and dampings from damped vibration signal which usually has multiple modes. This proposed method has been verified by both simulation and experiment. The result by EMD method which has used only output vibration data is almost identical to the result by FRF method which has used both input and output data, thereby proving usefulness and accuracy of the proposed method.

• Wind and Structures
• /
• 제36권1호
• /
• pp.61-73
• /
• 2023

In this article, a novel structural modal parameters identification methodology is developed to determine the natural frequencies and damping ratios of civil structures based on the symplectic geometry mode decomposition (SGMD) approach. The SGMD approach is a new decomposition algorithm that can decompose the complex response signals with better decomposition performance and robustness. The novel method firstly decomposes the measured structural vibration response signals into individual mode components using the SGMD approach. The natural excitation technique (NExT) method is then used to obtain the free vibration response of each individual mode component. Finally, modal natural frequencies and damping ratios are identified using the direct interpolating (DI) method and a curve fitting function. The effectiveness of the proposed method is demonstrated based on numerical simulation and field measurement. The structural modal parameters are identified utilizing the simulated non-stationary responses of a frame structure and the field measured non-stationary responses of a supertall building during a typhoon. The results demonstrate that the developed method can identify the natural frequencies and damping ratios of civil structures efficiently and accurately.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.491-496
• /
• 2003

In sensitivity analysis, semi-analytical method(SAM) reveals severe inaccuracy problem when relatively large rigid body motions are identified for individual elements. Recently such errors of SAM resulted by the finite difference scheme have been improved by the separation of rigid body mode. But the eigenvalue should be obtained first before the sensitivity analysis is performed and it takes much time in the case that large system is considered. In the present study, by constructing a reduced one from the original system, iterative method combined with mode decomposition technique is proposed to compute reliable semi-analytical design sensitivities. The sensitivity analysis is performed by the eigenvector acquired from the reduced system. The error of SAM caused by difference scheme is alleviated by Von Neumann series approximation.

• 한국정밀공학회지
• /
• 제33권12호
• /
• pp.985-992
• /
• 2016

Bearings have various uses in industrial equipment. The lifetime of bearings is often lesser than anticipated at the time of purchase, due to environmental wear, processing, and machining errors. Bearing conditions are important, since defects and damage can lead to significant issues in production processes. In this study, we developed a method to diagnose faults in the bearing conditions. The faults were determined using kurtosis, average, and standard deviation. An intrinsic mode function for the data from the selected axis was extracted using empirical mode decomposition. The intrinsic mode function was obtained based on the frequency, and the learning data of ANN (Artificial Neural Network) was concluded, following which the normal and fault conditions of the bearing were classified.

• 한국수자원학회논문집
• /
• 제49권3호
• /
• pp.197-205
• /
• 2016

최근 기후변화로 인한 자연재해가 증가하면서 강수 및 기온자료의 시계열에 대한 변동성과 추세를 분석하여 그 변화를 예측하는 연구의 필요성이 점점 커지고 있다. 하지만 강수나 기온의 경우 복합적인 요소에 의해 변동이 일어나 자료의 변동성이 매우 심하고 너무 많은 요소를 포함하게 되어 그 특성을 정확히 판단하기가 쉽지 않다. 따라서 자료의 시계열을 분해하게 되면 각 특성을 가진 요소를 추출할 수 있으므로, 정확한 변동 특성을 파악할 수 있다. 본 연구에서는 우리나라 강수 및 기온자료를 경험적 모드분해법(Empirical Mode Decomposition, EMD)을 통해 주기별로 분해하여 각각의 내재모드함수(Intrinsic Mode Function, IMF)를 추출하였다. 또한, 추출된 내재모드함수의 에너지 밀도를 이용한 유의성 검정을 통해 원자료로부터 유의미한 자료를 포함하고 있는 내재모드함수를 선별하고, 이들의 주기성, 경향성을 분석하였다.

• 한국기계가공학회지
• /
• 제15권4호
• /
• pp.23-29
• /
• 2016

Rotary machine is major equipment in industry. The rotary machine is applied for a machine tool, ship, vehicle, power plant, and so on. But a spindle fault increase product's expense and decrease quality of a workpiece in machine tool. A turbine in power plant is directly connected to human safety. National crisis could be happened by stopping of rotary machine in nuclear plant. Therefore, it is very important to know rotary machine condition in industry field. This study mentioned fault diagnosis algorithm with statistical parameter and empirical mode decomposition. Vibration locations can be found by analyze kurtosis of data from triaxial axis. Support vector of data determine threshold using hyperplane with fault location. Empirical mode decomposition is used to find fault caused by intrinsic mode. This paper suggested algorithm to find direction and causes from generated fault.