• International Journal of Precision Engineering and Manufacturing
• /
• 제7권2호
• /
• pp.52-55
• /
• 2006

The OLEDs(Organic Light-Emitting Diodes) structure organizes the bottom layer using glass, ITO(indium thin oxide), hole injection layer, hole transport layer, emitting material layer, electron transport layer, electron injection layer and cathode using metal. OLED has various advantages. OLEDs research has been divided into structural side and emitting material side. The amount of emitting light and luminescence efficiency has been improved by continuing effort for emitting material layer. The emitting light mechanism of OLEDs consists of electrons and holes injected from cathode and anode recombination in emitting material layer. The mobilities of injected electrons and holes are different. The mobility of holes is faster than that of electrons. In order to get high luminescence efficiency by recombine electrons and holes, the balance of their mobility must be set. The more complex thin film structure of OLED becomes, the more understanding about physical phenomenon in each interface is needed. This paper observed what the thickness change of hole transport layer has an affection through the below experiments. Moreover, this paper uses numerical analysis about carrier transport layer thickness change on the basis of these experimental results that agree with simulation results.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권6호
• /
• pp.564-571
• /
• 1996

We calculated the drift-velocities of electrons and holes of I $n_{0.53}$(A $l_{x}$G $a_{1-x}$ )$_{0.47}$As, which is used for semiconductor materials of high performance HBTs, along with the various doping concentrations and Al mole fractions as well as the electric fields by Monte Carlo experiment. Especially, for the valence bands the accuracy of hole-drift-velocity was improved in the consideration of intervalley scattering due to the inelastic scattering of acoustic phonon. From the results the empirical formulas of the low- and high field mobility of electrons and holes were extracted by using nonlinear least square fitting method. The accuracy of the formulas was proved by comparing the formula of low-field electron mobility as well as drift-velocity of I $n_{0.53}$ G $a_{0.47}$As and of low-field hole mobility of GaAs with the measured values, where the error was below 10%. For the high-field mobilities of electron and hole the results calculated by the formulas were very well matched with the MC experimental results except at the narrow field range where the electrons produced the velocity overshoot and the corresponding error was about 30%.0%. 30%.0%.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.162-165
• /
• 2000

To investigate the effect of metal electrode in electroluminescent[EL] devices, we fabricated EL devices of ITO/P3HT/Al, ITO/P3HT/LiF/Al and ITO/P3HT/Mg:In structure. In current-voltage-light power characteristics, turn-on voltage of EL devices using LiF insulating layer and Mg:In(2.8V) metal electrode is lower than EL device using Al(4.2V). Besides the external quantum efficiency is improved also. The reason is related to carrier mobility and carrier injection, which would affect the hole-electron balance. In the device with Al electrode, holes injected from indium-tin-oxide[ITO] to poly(3-hexylthiophene)[P3HT] might reach the Al electrode without interacting with injected electrons, because the electron injection efficiency was very low for this electrode. Besides oxidation of the Al electrode is likely due to holes reaching the cathode without meeting injected electrons. Another possible reason for the higher EL efficiency may be the insulating layer playing the role of a tunneling barrier for holes to the Al electrode. In all EL devices, the orange-red light was clearly visible in a dark room. Maximum peak wavelength of EL spectrum emitted at 640nm in accordance with photon energy 1.9eV

• 한국전기전자재료학회논문지
• /
• 제27권2호
• /
• pp.71-75
• /
• 2014

To observe the optical characteristic of oxide semiconductor depending on the degree of bonding structures, SiOC, ZnO and IGZO were prepared by the RF magnetron sputter system and chemical vapor deposition. Generally, crystal ZnO, amorphous SiOC and IGZO changed the optical characteristics in according to the electro-chemical behavior due to the oxygen vacancy at an interface between different groups. Transmittance of SiOC and IGZO with amorphous structures was higher than that of ZnO with crystal structure, because of lowering the carrier concentration due to the recombination of electron and holes carriers as oxygen vacancies. Besides, the energy gap of amorphous SiOC and IGZO was higher than the energy gap of crystal ZnO. The diffusion mobility of holes is higher than the drift mobility of electrons.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.1002-1006
• /
• 2004

The studies on OLED(Organic Light-Emitting Diode) materials and structures have been researched in other to improve luminescence efficiency of OLED. Electrons and holes are injected into the devices, transported across the layer and recombine to form excitons, their profiles are sensitive to mobility velocity of electrons and holes. A suggested means of improving the efficiency of LEDs would be to balance the injection of electrons and holes into light emission layer of the device. In this paper, we demonstrate the difference of velocity between hole and electron by experiments, and compare with a data of simulation and experiment changing hole carrier transport layer thickness, so we get the optimal we improve luminescence efficiency. We improve understanding of the various luminescence efficiency through experiments and numerical analysis of luminescence efficiency in the hole carrier transport layer's thicknes.

• The Korean Journal of Ceramics
• /
• 제6권2호
• /
• pp.150-154
• /
• 2000

Mobilities of electrons ($\mu_p$) and holes ($\mu_p$) in 2, 5, and 10 mol% $TiO_2$-doped yttria stabilized zirconia (TD-YSZ) have been estimated by a non-steady state gas permeation method using models proposed by Weppner and Maruyama. Values of $\mu_n$ and $\mu_p$ were found to be closed to those in non-doped YSZ reported earlier. The concentration of electrons and holes were calculated from $\mu_n$ and $\mu_p$ values and the partial conductivities of electrons and holes measured by a dc-polarization method. The concentration of electrons at unit oxygen partial pressure increased with increasing $TiO_2$concentration, while the hole concentration was almost independent of $TiO_2$concentration.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 학술대회 및 기술세미나 논문집 디스플레이 광소자
• /
• pp.85-88
• /
• 2006

The transport properties of amorphous selenium typical of the material used in direct conversion x-ray imaging devices are reported. The effects of As addition on the carrier mobility and recombination lifetime in amorphous selenium (a-Se) films have been studied using the moving photocarrier grating (MPG) technique. We have found an increase in hole drift mobility and recombination lifetime, especially when 0.3% As is added into a-Se film, whereas electron mobility decreases with As addition due to the defect density. The transport properties for As doped a-Se films obtained by using MPG technique have been compared with the drift mobilities of holes and electrons obtained by time of flight (TOF) measurement.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.343-344
• /
• 2007

Carrier mobility was measured using time-of-flight (TOF) measurements to investigate the transport properties of holes and electrons in stabilized a-Se film. A laser beam with pulse duration of 5 ns and wavelength of 350 nm was illuminated on the surface of a-Se with thickness of $400\;{\mu}m$. The measured transit times of hole and electron were about $8.73\;{\mu}s\;and\;229.17\;{\mu}s$, respectively. The experimental results showed that the hole and electron drifting mobility were $0.04584\;cm^2V^{-1}S^{-1}\;and\;0.00174\;cm^2V^{-1}s^{-1}\;at\;10\;V/{\mu}m$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.207-208
• /
• 2000

The temporal response of the electroluminescence (EL) has been studied in the organic electroluminescent devices fabricated with a vacuum-deposited poly(p-phenylene) (PPP) thin film upon the application of a rectangular driving voltage. The blue EL emission arises with a delay time of several hundred nanoseconds and then saturates with the rise time of less than microsecond. The EL delay time is considered as the transit time of holes in the PPP thin film since the hole mobility is much larger than the electron mobility in PPP. The hole mobility is estimated to be ${\sim}$ $1{\times}10^{-5}$ $cm^2/Vs$ in the vacuum-deposited PPP film.

• 한국세라믹학회지
• /
• 제37권7호
• /
• pp.686-692
• /
• 2000

Tin-doped In2O3 (ITO) films were fabricated using a d.c. magnetron reactive sputteirng of a In-10 wt% Sn alloy target in an Ar and O2 gas mixture. To understand the behavior of the carrier mobility in ITO films with O2 partial pressure, the resistivity, carrier concentration and mobility, film density, and intrinsic stress in the films were measured with O2 partial pressure. It was found experimentally that the carrier mobility increased rapidly as the film density increased. In the ITO film with the density close to theoretical one, the mean free path was the same as the columnar diameter. This indicated that the mobility in ITO films was strongly influenced by the crystall size. However, in the case where the film density was smaller than a theoretical density, the mean free paths were also smaller the columnar diameter. It was analyzed that the electron scattering at pores and holes within the crystalline was the major obstacle for electron conduction in ITO films. The measurement of intrinsic stress in ITO films also made it clear that the density of ITO films was controlled by the bombardment of oxygen neutrals on the growing film.