• The KIPS Transactions:PartC
• /
• v.12C no.7 s.103
• /
• pp.1031-1038
• /
• 2005

As the research on home network technologies, sensor network technologies, and ubiquitous network technologies makes rapid progresses, wireless ad-hoc network have attracted a lot of attention. A wireless ad-hoc network is a temporary network formed by a collection of wireless mobile nodes without the aid of my existing network infrastructure or centralized administration, and it is suitable for ubiquitous computing environments. In this paper, we suggest an interconnection scheme between the wireless ad-hoc network environment based on multiple path source routing protocol and a Mobile-IP based network environment. This scheme reduces the overhead of route re-establishment and re-registration by maintaining multiple paths between the mobile host in wireless ad-hoc network and the base station in mobile-IP network. Also it puts the base station in charge of function that performs translation between wireless ad-hoc network packets and Mobile-IP packets, reducing the load of mobile hosts. In this paper, our simulations show that our scheme outperforms existing interconnecting schemes with regards to throughput and end-to-end delay Also we show that our scheme outperforms multi-paths approach using disjoint routes with regards to routing overhead.

• The KIPS Transactions:PartC
• /
• v.12C no.1 s.97
• /
• pp.111-120
• /
• 2005

A mobile ad-hoc network is an autonomous system of mobile nodes which are free to move around randomly and organize themselves arbitrarily, hence a routing protocol that handles the dynamic network topology changes is required for the network. In this paper we present a multi -Path on-demand routing protocol called R-DSR (Robust Dynamic Source Routing), an extension to the existing IETF protocol DSR. The proposed protocol has it that every pair of 2-hop away nodes on the single route is additionally connected via an alternative node. Throughout mathematical analysis we show the proposed protocol reveals higher message delivery rate than that of the Das's multi-path protocol, currently known as one of the most typical approaches related to DSR.

• Journal of Power Electronics
• /
• v.8 no.4
• /
• pp.291-300
• /
• 2008

In this paper power system and drive-train for omni-directional autonomous mobile robots with multiple energy storage units are presented. Because in proposed system, which is implemented in soccer robots, the ability of power flow control from of multiple separated energy storage units and speed control for each motor are combined, these robots can be derived by more than one power source. This capability, allow robot to diversify its energy source by employing hybrid power sources. In this research Lithium ion polymer batteries have been used for main and auxiliary energy storage units because of their high power and energy densities. And to protect them against deep discharge, over current and short circuit, a protection circuit was designed. The other parts of our robot power system are DC-DC converters and kicker circuit. The simulation and experimental results show proposed scheme and extracted equations are valid and energy management and speed control can be achieved properly using this method. The filed experiments show robot mobility functions to perform the requested motion is enough and it has a high maneuverability in the field.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11A
• /
• pp.1085-1090
• /
• 2010

Ultra wideband (UWB) technologies have been developed to exploit a new spectrum resource in substances and to realize ultra-high-speed communication, high precision geolocation, and other applications. The energy of UWB signal is extremely spread from near DC to a few GHz. This means that the interference between conventional narrowband systems and UWB systems is inevitable. However, the interference effects had not previously been studied from UWB wireless systems to conventional mobile wireless systems sharing the frequency bands such as Cellular CDMA and Korean PCS. This paper experimentally evaluates the interference from two kinds of UWB sources, namely a direct-sequence spread-spectrum UWB source and an impulse radio UWB source, to a Cellular CDMA and K-PCS digital transmission system. The average frame error rate degradation of each system arc presented. From these experimental results, we show that in all practical cases UWB system can coexist with Cellular CDMA and K-PCS terminal without causing any dangerous interference.

• Industrial Engineering and Management Systems
• /
• v.15 no.3
• /
• pp.268-277
• /
• 2016

Load balancing is a significant technique to prolong a network's lifetime in sensor network. This paper introduces a hybrid approach named as Load Distributing Hybrid Routing Protocol (LDHRP) composed with a border node routing protocol (BDRP) and greedy forwarding (GF) strategy which will make the routing effective, especially in mobility scenarios. In an existing solution, because of the high network complexity, the data delivery latency increases. To overcome this limitation, a new approach is proposed in which the source node transmits the data to its respective destination via border nodes or greedily until the complete data is transmitted. In this way, the whole load of a network is evenly distributed among the participating nodes. However, border node is mainly responsible in aggregating data from the source and further forwards it to mobile sink; so there will be fewer chances of energy expenditure in the network. In addition to this, number of hop counts while transmitting the data will be reduced as compared to the existing solutions HRLBP and ZRP. From the simulation results, we conclude that proposed approach outperforms well than existing solutions in terms including end-to-end delay, packet loss rate and so on and thus guarantees enhancement in lifetime.

• International Journal of Internet, Broadcasting and Communication
• /
• v.14 no.2
• /
• pp.63-69
• /
• 2022

We develop a smart tourism information system that provides smart tourism services to free independent tourists (FITs) through various content distribution channels such as mobile apps, Instagram, YouTube, and chatbots. The smart tourism information system provides location and storytelling-based tourism information, accommodation, restaurant information, and recommended travel products so that tourists can create a travel itinerary based on personalized situation awareness. The smart tourism information system also provides smart tourism services using commercial maps, navigation, and weather forecast APIs from the Korea Meteorological Administration to provide smart tour guide services to tourists who travel according to the travel itinerary. In this paper, we develop the React Native app that provides smart tourism services provided by the smart tourism information system. The smart tourism React Native app has implemented two methods: a method that directly connects to the smart tourism information system, and a method that provides services by interworking through the GraphQL Query Language developed by META (Facebook). The smart tourism React Native app implements OSMU (One Source Multi-use) by providing tourism information from mobile apps, photos from Instagram, and drone videos from YouTube as an integrated UI.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10c
• /
• pp.469-471
• /
• 2003

본 논문에서는 이동 애드­혹 네트워크(mobile ad­hoc networks)의 대표적인 경로구축 방법인 DSR(dynamic source routing)을 확장한 R­DSR(robust DSR)을 제안한다. 제안된 R­DSR에서는 기존의 단일 경로 상의 2­흡 간격의 모든 노드들이 대체 노드를 경유하여 복수 개의 라우팅 경로를 유지하도록 구성되기 때문에, 경로 상의 일부 노드들이 이동하더라도 경로가 유지될 확률이 높아 메시지 전달률이 향상된다. 수학적 분석을 통하여 관련 연구 중 가장 우수한 것으로 알려진 Das의 다중경로 프로토콜보다 더 높은 라우팅 경로 유지 확률을 나타냄을 보였다. 아울러, 대체경로의 위상적 특성에 의해 빠른 대체경로로의 복구도 가능하다는 결론을 얻었다.

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.57-60
• /
• 2004

Next generation wireless network is evolving toward IP-based network that can various provide multimedia services. A challenge in wireless mobile Internet is support of quality of service over wireless access networks. DiffServ architecture is proposed for evolving wireless mobile Internet. In this paper we propose an algorithm for optimal buffer partitioning which requires the minimal channel capacity to satisfy the QoS requirements of input traffic. We used a partitioned buffer with size B to serve a layered traffic at each DiffServ router. We consider a traffic model with a single source generates traffic having J $(J\geq2)$ quality of service (QoS) classes. QoS in this case is described by loss probability $\varepsilon_j$. for QoS class j. Traffic is admitted or rejected based on the buffer occupancy and its service class. Traffic is generated by heterogeneous Markov-modulated fluid source (MMFS).

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.429-432
• /
• 2012

Mobile devices diffusion begins by the iPhone and spreads by the Android. A widely used mobile devices is Smartphone(iPhone, Android, Bada, WindowPhone7, BlackBerry, etc) and Tablet(iPad, Android). In the past, we have developed a dedicated application for device. But, Now we must develop a application by considering the characteristics of the operating system. Accordingly, many problems occurred and other developmet methods have emerged. In this paper, we learn about MobileHybridApp development tool-oriented One Source Multi Use-and compare the differences, propose a method to develop context-sensitive.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.4
• /
• pp.470-476
• /
• 2008

In this paper, we describe the cause of TDMA noise and distinction method of TDMA noise source in a GSM mobile phone. The causes of TDMA noise are composed of RF(Radio Frequency) energy coupling and low frequency energy coupling by burst ripple. We propose the distinction method of TDMA noise source from output(TDMA noise measurement) and frequency response of a system(audio path). Especially we propose a method of insertion loss($S_{21}$) analysis and the improvement method for RF energy coupling. Capacitor(40 pF) is a solution to reduce RF energy coupling and therefore TDMA noise was reduced by 10 dB.