• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.277-280
• /
• 2001

Due to the explosive popularization of the Internet, it has been researched for many mobile terminals how to receive various multimedia information. Especially, it has been considered that a mobile terminal is serviced with multimedia information through a inherent IP address. In this paper we have proposed the Handover Signaling Method and analyzed the Handover delay time of this proposed method in wireless section. This proposed method is appropriate to Broadband systems with Mobile IP. We have simulated Handover delay time with respect to the distance between a terminal and base stations

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2A
• /
• pp.186-195
• /
• 2010

For the fast target base station channel decision in WiMAX networks, fast group scanning scheme was suggested, in which mobile stations in proximity of each other form a group and scan the candidate channels dispersively. However, the previous group scanning scheme does not consider the different QoS requirements of each MS in a group. In this paper we propose the enhanced group scanning scheme, so-called QoS-aware group scan scheduling scheme, that makes mobile stations in a group scan the candidate channels without deteriorating the QoS requirements. We introduce the QoS-aware channel scanning concept of a individual mobile station and show the different scanning latencies due to the different QoS requirements. With the help of the efficient channel allocation by the serving BS, in the proposed scanning scheme, a mobile station with relatively higher QoS in a group scans less amount of candidate channels than the others with relatively lower QoS, while the mobile stations in a group still guarantees the fast target base station decision. The performance results show that our proposed scanning scheme results in the fast target base station decision while considering the QoS requirements of each MS.

• Journal of KIISE:Computing Practices and Letters
• /
• v.6 no.4
• /
• pp.411-420
• /
• 2000

The performance of soft handoffs of CDMA mobile communication systems is potentially determined by several factors such as handoff-related system parameters (T_ADD, T_DROP, T_COMP, T_TDROP), mobile stations' mobility, service areas, capacity of base stations. Due to the importance of handoffs in mobile communications, several methods have been proposed and tested through computer simulations to prove the efficiency of proposed methods. Different assumptions on the above mentioned factors often produce different simulation results. Therefore, the credibility of a simulation result is directly determined by the objectivity of the assumptions made by the simulation. This paper proposes a new soft handoff method that controls handoff delay time based on a mobile station's speed, and compares it with the current method of CDMA systems. The simulation results showed that the new method is much more efficient for mobile stations that are free in their moving direction and space than for those restricted in their moving direction and space. In addition, the results showed that even the same handoff method may produces different simulation results depending on whether a service area is modeled as two-dimensional space or three-dimensional space. These results indicate the importance of suitable models of user mobility, especially the movement types and space allowed for mobile stations, which have been neglected in simulation studies of mobile communications.

• Journal of Communications and Networks
• /
• v.9 no.3
• /
• pp.247-253
• /
• 2007

In this paper, downlink capacity of time duplex division (TDD) based cellular wireless networks utilizing fixed hopping stations is investigated. In the network, a number of fixed subscriber stations act as hopping transmission stations between base stations and far away subscribers, forming a cellular and ad hoc mobile network model. At the radio layer, TDD code division multiple access (CDMA) is selected as the radio interface due to high efficiency of frequency usage. In order to improve the system performance in terms of downlink capacity, we propose different time slot allocation schemes with the usage of fixed hopping stations, which can be selected by either random or distanced dependent schemes. Performance results obtained by computer simulation demonstrate the effectiveness of the proposed network to improve downlink system capacity.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.1
• /
• pp.14-20
• /
• 2012

CoMP(Coordinated Multi-Point transmission and reception) refers to a cooperative transmission strategy to control the interference from adjacent base stations in cellular mobile communication systems, which efficiently enhances the data throughput of the systems. As the number of the base stations participating in cooperative transmission increases, however, a larger amount of information exchange to carry the CSI(Channel State Information) of the mobile terminals is required. In this paper, we propose a partial CoMP transmission method for systems under the constraint of finite feedback information data. This method selects candidates of base stations which can provide high efficiency gain when they participate in the CoMP set. To achieve this, the cooperative base station combination is constructed by considering the preferred base stations of users. The cooperative base station combinations are dynamically applied since the preferred base station combinations of users may be different. We perform computer simulations to compare performance of the non-CoMP, full-CoMP and partial CoMP in terms of the average throughput using finite feedback and demonstrate the performance improvement of the proposed method.

• Journal of Positioning, Navigation, and Timing
• /
• v.7 no.2
• /
• pp.53-59
• /
• 2018

This paper proposes a pseudo-random beamforming technique for time-synchronized mobile base stations (BSs) for multi-cell downlink networks which have mobility. The base stations equipped with multi-antennas and mobile stations (MSs) are time-synchronized based on global positioning system (GPS) signals and generate a number of transmit beamforming matrix candidates according to the predetermined pseudo-random pattern. In addition, MSs generate receive beamforming vectors that correspond to the beam index number based on the minimum mean square error (MMSE) using transmit beamforming vectors that make up a number of transmit beamforming matrices and wireless channel matrices from BSs estimated via the reference signals (RS). Afterward, values of received signal-to-interference-plus-noise ratio (SINR) with regard to all transmit beamforming vectors are calculated, and the resulting values are then feedbacked to the BS of the same cells along with the beam index number. Each of the BSs calculates each of the sum-rates of the transmit beamforming matrix candidates based on the feedback information and then transmits the calculated results to the BS coordinator. After this, optimum transmit beamforming matrices, which can maximize a sum-rate of the entire cells, are selected at the BS coordinator and informed to the BSs. Finally, data signals are transmitted using them. The simulation results verified that a sum-rate of the entire cells was improved as the number of transmit beamforming matrix candidates increased. It was also found that if the received SINR values and beam index numbers are feedbacked opportunistically from each of the MSs to the BSs, not only nearly the same performance in sum-rate with that of applying existing feedback techniques could be achieved but also an amount of feedback was significantly reduced.

• Journal of information and communication convergence engineering
• /
• v.8 no.3
• /
• pp.277-280
• /
• 2010

We report that broadcast messages in Mobile WiMAX networks should be synchronized throughout all the base stations to gain the benefit of beamforming technique. A simple synchronization implementation of broadcast messages in Mobile WiMAX networks is presented. Using this technique, the interference between broadcast messages and beamformed messages can be reduced.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.12
• /
• pp.2806-2811
• /
• 2013

New technologies such as multi-antenna and small cell were proposed as key technology for the next generation mobile system to cope with the explosively increasing mobile data traffic. In particular, heterogeneous mobile communication network which can improve spatial reuse factor by exploiting macro and small cells simultaneously is attracting attention. However, the heterogeneous network has a problem that the utilization of small cells becomes low because the transmit power of macro base stations is much higher than that of small base stations and then the probability that mobile stations are attached to the macro base stations becomes high. This problem is dominant in uplink. The concept of cell range expansion bias to mitigate the problem was proposed by 3GPP and the corresponding standardization is in progress. In this paper, we analyze the downlink performance of the heterogeneous mobile communication network based on a system level simulator with the cell range expansion bias in terms of average cell spectral efficiency.

• Journal of Korea Multimedia Society
• /
• v.7 no.5
• /
• pp.737-743
• /
• 2004

In this paper, we propose the call control scheme that can improve the capacity of the wireless system for the non-uniform traffic load distribution and the multiple types of services in multiple cells CDMA system. The number of mobile stations that can be served simultaneously in a base station is limited by the amount of total interference received in CDMA system. Further, the average number of mobile stations in each cell may not be uniformly distributed. Considering this factors, the call admission control scheme using the effective bandwidth concept is adapted in this paper. Thus, the bandwidth for a new call can be varied dynamically for reducing the blocking rate of new calls and the dropping rate of handoff calls. The suggested call control scheme is experimented through a simulation by dynamically assigning the bandwidth to new and handoff calls. The simulation results show that the proposed call control scheme can accommodate more mobile stations than the other methods in multiple cells environment.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.5
• /
• pp.451-458
• /
• 2016

Urban railway can be divided into ground and underground sections. In particular, the center of the metropolitan has been built mostly underground stations and tunnels. Underground section is difficult to measure the position because GPS signal is unavailable, so it is necessary to apply the indoor positioning technology. For this purpose, we analyzed the positioning technologies which are based on Wi-Fi and mobile base stations. The positing technology for smart phone which uses mobile base station' information is developed in the underground area of urban railway where the core technique is to implement base station ID into the positing technology by considering hand-off point.