• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.10B
• /
• pp.865-875
• /
• 2008

In this paper, we propose a reliable multicast scheme for the tactical wireless ad hoc network where the members share the situation and operation data. Our scheme consists of two phases to guarantee the reliability. During the dissemination phase, we utilizes an epidemic approach similar to gossip-based ad hoc routing. Then the group members interchange the message reception state information periodically so that they are able to recover missing packets from the other members. We evaluate the performance of our scheme through extensive simulations using the network simulator in comparison with other existing reliable multicast schemes in mobile ad hoc network. Our scheme shows higher packet delivery ratio regardless of the mobility and imposes much lower control overhead to the non-group members compared with the existing schemes.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.2
• /
• pp.121-129
• /
• 2011

It is progressing as new advents and remarkable developments of mobile device every year. On the upper line reason, NAND FLASH large density memory demands which can be stored into portable devices have been dramatically increasing. Therefore, the cell size of the NAND Flash memory has been scaled down by merely 50% and has been doubling density each per year. [1] However, side effects have arisen the cell distribution and reliability characteristics related to coupling interference, channel disturbance, floating gate electron retention, write-erase cycling owing to shrinking around 20nm technology. Also, FLASH controller to manage shrink effect leads to speed and current issues. In this paper, It will be introduced to solve cycling, retention and fail bit problems of sub-deep micron shrink such as Virtual negative read used in moving read, randomization. The characteristics of retention, cycling and program performance have 3 K per 1 year and 12.7 MB/s respectively. And device size is 179.32 $mm^2$ (16.79 mm ${\times}$ 10.68 mm) in 3 metal 26 nm CMOS.

• Archives of Obesity and Metabolism
• /
• v.1 no.2
• /
• pp.74-77
• /
• 2022

Treatment of obesity includes diet therapy, exercise therapy, cognitive behavioral therapy, drug therapy, and bariatric surgery. Most obese patients lose weight by combining diet, exercise, cognitive behavioral therapy or medication. But, in some cases, only one of these treatments is preferred. A 56-year-old male patient had a body mass index (BMI) of 33.1 kg/m² and a waist circumference of 108 cm. He had been treated for hypertension; diabetes and dyslipidemia were diagnosed but not treated. However, at the initial visit to treat obesity, he was diagnosed with type 2 diabetes mellitus and dyslipidemia again. So he decided to treat these two diseases with drugs first and modify his lifestyle. He started walking more than 20,000 steps every day and then he really walked about 15,000 steps every day during 5 months, although diet calorie or alcohol drinking amount was not significantly decreased. After about 6 months, the patient's weight decreased by 10.1 kg, the BMI decreased by 4.1 kg/m², the waist circumference decreased by 10 cm, the glycated hemoglobin (HbA1c) decreased by 4.59%, the visceral fat area decreased by 115 cm², and the subcutaneous fat decreased by 38 cm². As a result of body composition analysis, muscle mass increased by 1.2 kg, and the percentage of body fat decreased by 10.4%. The walking exercise does not have any space restrictions and has high accessibility by using a mobile phone app. Therefore, considering the patient's situation, it would be better to treat obese patients by first recommending walking exercises and increasing the number of steps to lose weight and improve the comorbidities.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.3
• /
• pp.355-366
• /
• 2022

This paper proposes a microcode-based neural network accelerator controller for artificial intelligence accelerators that can be reconstructed using a programmable architecture and provide the advantages of low-power and ultra-small chip size. In order for the target accelerator to support various neural network models, the neural network model can be converted into microcode through microcode compiler and mounted on accelerator to control the operators of the accelerator such as datapath and memory access. While the proposed controller and accelerator can run various CNN models, in this paper, we tested them using the YOLOv2-Tiny CNN model. Using a system clock of 200 MHz, the Controller and accelerator achieved an inference time of 137.9 ms/image for VOC 2012 dataset to detect object, 99.5ms/image for mask detection dataset to detect wearing mask. When implementing an accelerator equipped with the proposed controller as a silicon chip, the gate count is 618,388, which corresponds to 65.5% reduction in chip area compared with an accelerator employing a CPU-based controller (RISC-V).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.6
• /
• pp.670-680
• /
• 2010

A low power single-chip CMOS receiver for 60 GHz mobile application are proposed in this paper. The single-chip receiver consists of a 4-stage current re-use LNA with under 4 dB NF, Cgs compensating resistive mixer with -9.4 dB conversion gain, Ka-band low phase noise VCO with -113 dBc/Hz phase noise at 1 MHz offset from 26.89 GHz, high-suppression frequency doubler with -0.45 dB conversion gain, and 2-stage current re-use drive amplifier. The size of the fabricated receiver using a standard 0.13 ${\mu}m$ CMOS technology is 2.67 mm$\times$0.75 mm including probing pads. An RF bandwidth is 6.2 GHz, from 55 to 61.2 GHz and an LO tuning range is 7.14 GHz, from 48.45 GHz to 55.59 GHz. The If bandwidth is 5.25 GHz(4.75~10 GHz) The conversion gain and input P1 dB are -9.5 dB and -12.5 dBm, respectively, at RF frequency of 59 GHz. The proposed single-chip receiver describes very good noise performances and linearity with very low DC power consumption of only 21.9 mW.

• Journal of IKEEE
• /
• v.21 no.4
• /
• pp.388-396
• /
• 2017

Since there are many variables such as various poses, illuminations and occlusions in a face detection problem, a high performance detection system is required. Although CNN is excellent in image classification, CNN operatioin requires high-performance hardware resources. But low cost low power environments are essential for small and mobile systems. So in this paper, the CPU-FPGA integrated system is designed based on 3-stage cascade CNN architecture using small size FPGA. Adaptive Region of Interest (ROI) is applied to reduce the number of CNN operations using face information of the previous frame. We use a Field Programmable Gate Array(FPGA) to accelerate the CNN computations. The accelerator reads multiple featuremap at once on the FPGA and performs a Multiply-Accumulate (MAC) operation in parallel for convolution operation. The system is implemented on Altera Cyclone V FPGA in which ARM Cortex A-9 and on-chip SRAM are embedded. The system runs at 30FPS with HD resolution input images. The CPU-FPGA integrated system showed 8.5 times of the power efficiency compared to systems using CPU only.

• Herbal Formula Science
• /
• v.21 no.2
• /
• pp.133-143
• /
• 2013

Objectives : We carry out the simultaneous quantification for quality control of four components in Bangpungtongseong-san (BPTSS) sample. In addition, we assessed the antioxidant effects of BPTSS sample. Methods : The used column for separation and analysis of four compounds was Luna C18 column and column oven temperature was maintained at $40^{\circ}C$. The mobile phase for simultaneous determination consisted of two solvent systems, 1.0% acetic acid in water and 1.0% acetic acid in acetonitrile. High performance liquid chromatography-photodiode array (HPLC-PDA) method for analysis was performed at a flow rate of 1.0 mL/min with PDA detection at 254 and 280 nm. The injection volume was 10 ${\mu}L$. The antioxidant activities of BPTSS were evaluated by measuring free radical scavenging activities on 2,2'-Azinobis-3-ethyl-benzothiazoline-6-sulfonic acid (ABTS) and 1-1-diphenyl-2-picrylhydrazyl (DPPH). The inhibitory effects on low-density lipoprotein (LDL) oxidation were evaluated by the formation of thiobarbituric acid relative substances (TBARS) and relative electrophoretic mobility (REM). Results : Calibration curves were acquired with $r^2{\geq}0.9999$. The values of limit of detection (LOD) and quantification (LOQ) were 0.06-0.29 ${\mu}g/mL$ and 0.20-0.98 ${\mu}g/mL$, respectively. The amounts of geniposide, liquiritin, baicalin, and glycyrrhizin in BPTSS were 5.06, 7.33, 27.56, and 7.81 mg/g, respectively. The BPTSS showed the radical scavenging activity in a dose-dependent manner. The concentration required for 50% reduction (RC50) against ABTS and DPPH radicals were 72.51 ${\mu}g/mL$ and 128.49 ${\mu}g/mL$. Furthermore, GMGHT reduced the oxidation properties of LDL induced by CuSO4. Conclusions : The established HPLC-PDA method will be helpful to improve quality control of BPTSS. In addition, BPTSS has potentials as therapeutic agent on anti-atherosclerosis.

• Cartoon and Animation Studies
• /
• s.34
• /
• pp.23-43
• /
• 2014

The development of the Internet in the 21st century had made a variety of cross-cultural environment so that animations also have evolved with new features to Web-Animation. In Korea, the web-based flash animation leap forward to the animation Utopia in the early 2000's, but did not last long. The web-based animations should attract audience's attention not only with it's minimum streaming capacity but also with showing it's best qualities as well, Therefore, the stimulating narrative strategies were mandatories for web-animation in 2000's. The absence of in-depth research on media, poor revenue structure, and the emergence of mobile games and e-learning industries made the web-animation become just a one-time/one-consumable content. There were no subsequent generation of korean web-animation ever since. In this study, I want to introduce and analyze the american web animation series, (2005) as a new type of web-animation in current digital culture, In particular, I want to discuss how this web animation appeal to the audience with its narrative strategies through using some aspect of the internet culture which's differentiated from traditional media based cultures. This research could suggest diverse narrative strategies for the future web-animation with new vision. Moreover, This also allows to look at latest web-animation trends and its new experiments.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.10
• /
• pp.1363-1368
• /
• 2008

The extraction and quantitative analysis conditions for astaxanthin from Haematococcus pluvialis, and the structural characteristics of H. pluvialis extract, H. pluvialis hydrolysate and synthetic astaxanthin were investigated using UV/visible and FT-IR spectrometers. Astaxanthin was dissolved in methanol, and then treated to enhance the solubility by sonication for 45 min. With sonication pretreatment, the solubility of astaxanthin increased up to 1.5 times compared to that without sonication. The extracts were hydrolyzed by cholesterol esterase for the analysis of H. pluvialis extract containing astaxanthin ester. A HPLC method using reverse phase C18 column with methanol-water (95:5, v/v) as mobile phase was developed to analyze astaxanthin. After hydrolysis, the absorption spectrum of H. pluvialis hydrolysat was changed to similar pattern to synthetic astaxanthin, confirming the extraction and analysis condition of astaxanthin from H. pluvialis.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.1
• /
• pp.24-36
• /
• 2003

The digital mobile communication will be developed till getting multimedia service in anyone, any where, any time. Theses requiring items are going to be come true via IMT-2000 system. Transmitting signal bandwidth of IMT-2000 system is 3 times as large as IS-95 system. That is mean peak to average of signal is higher than IS-95A system. So we have to design it carefully not to effect in adjacent channel. HPA(High Power Amplifier) located in the end point of system is operated in 1-㏈ compression point(Pl㏈), then it generates 3rd and 5th inter modulation signals. Theses signals affect at adjacent channel and RF signal is distorted by compressed signal which is operated near by Pl㏈ point. Then the most important design factor is how we make HPA having high linearity. Feedback, Pre-distorter and Feed-forward methods are presented to solve theses problems. Feed-forward of these methods is having excellent improving capacity, but composed with complex structure. Generally, Linearity and Efficiency in power amplifier operate in the contrary, then it is difficult for us to find optimal operating point. In this paper we applied algorithm which searches optimal point of linear characteristics, which is key in Power Amplifier, using minimum current point of error amplifier in 1st loop. And we made 2nd loop compose with new structure. We confirmed fabricated LPA is operated by having high linearity and minimum current condition with ACPR of -26 ㏈m max. @ 30㎑ BW in 3.515㎒ and ACLR of 48 ㏈c max@${\pm}$㎒ from 1W to 40W.