• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.6
• /
• pp.1040-1047
• /
• 2015

This study is investigated for M2M Communication Network Standard based on 3GPP. The environment of M2M communication, we can predict the new mobile service that gathering, handling, controlling, transferring of the data for Intelligence, so that we can consider new direction for a lot of subject of study development issue. This study is shown three types of M2M network structure and four types of use cases on 3GPP International Standard. In Addition, we can introduce the future M2M communication network model, it can be propagate the industry and academic cooperation with 3GPP standards. The suggestion develops multiple applications and multiple devices for industry and academic. With the deployment of network provider, this environment support our current communication market that the standard devices of M2M network and service requirement. We are suggest this study for grasp the initial market with the intellectual property right (IPR) based on International Standards. In the future, we wish the success that grap the initial market or initial academic study with helpful issue.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.5A
• /
• pp.511-520
• /
• 2011

In this paper, we introduce a multiuser (MU) scheduling method for multiuser amplify-and-forward relay systems, which selects both the transmission mode, i.e., either one- or two-hop transmission, and the desired user via two steps. A closed-form expression for the average achievable rate of the proposed scheduling is derived under two transmission modes with MU scheduling, and its asymptotic solution is also analyzed in the limit of large number of mobile stations. Based on the analysis, we perform our two-step scheduling algorithm: the transmission mode selection followed by the user selection that needs partial feedback for instantaneous signal-to-noise ratios (SNRs) to the base station. We also analyze the average SNR condition such that the MU diversity gain is fully exploited. In addition, it is examined how to further reduce a quantity of feedback under certain conditions. The proposed algorithm shows the comparable achievable rate to that of the optimal one using full feedback information, while its required feedback overhead is reduced below half of the optimal one.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.5A
• /
• pp.432-440
• /
• 2011

For the 4th generation mobile communication, LTE-advanced system needs the broad frequency band up to 100MHz for providing the data rate of maximum 1Gpbs. However, it is very difficult to secure the broad frequency band in the current frequency allocation situation. So, carrier aggregation was proposed as the solution, in which several fragmented frequency bands are used at the same time. Basically, multiple parallel receivers are required to get the information data from the different frequency bands but this conventional multi-chain receiver system is very inefficient. Therefore, in this paper, we like to study the single chain system that is able to receive the multi-band signals in a single receiver based on the time division multiplexing (TDM) reception method. This proposed TDM receiver efficiently manage to receive the multi-band signals in time domain and handle the baseband signals with one DSP board. However, the serious distortion could be generated by the sampling timing offset (STO) in the TDM-based system. Therefore, we like to analyze STO effects in the TDM-based system and propose a compensation method using estimated STO. Finally, it is shown by simulation that the proposed method is appropriate for the single chain receiver and show good compensation performance.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.3
• /
• pp.48-58
• /
• 2009

Geo-graphical routing protocols as GPSR are known to be very suitable and useful for vehicular ad-hoc networks. However, a corresponding node can include some stale neighbor nodes being out of a transmission range, and the stale nodes are pone to get a high priority to be a next relay node in the greedy mode. In addition, some useful redundant information can be eliminated during planarization in the recovery mode. This paper deals with a new recovery mode, the Greedy Border Superiority Routing(GBSR), along with an Adaptive Neighbor list Management(ANM) scheme. Each node can easily treat stale nodes on its neighbor list by means of comparing previous and current Position of a neighbor. When a node meets the local maximum, it makes use of a border superior graph to recover from it. This approach improve the packet delivery ratio while it decreases the time to recover from the local maximum. We evaluate the performance of the proposed methods using a network simulator. The results shown that the proposed protocol reveals much better performance than GPSR protocol. Please Put the of paper here.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.9
• /
• pp.835-842
• /
• 2009

DVB-SSP is a new broadcasting system for hybrid satellite communications, which supports mobile handheld systems and fixed terrestrial systems. However, a critical factor must be considered in upper layer decoding which including erasure Reed-Solomon error correction combined with cyclic redundancy check. If there is only one bit error in an IP packet, the entire IP packet is considered as unreliable bytes, even if it contains correct bytes. IF, for example, there is one real byte error, in an If packet of 512 bytes, 511 correct bytes are erased from the frame. Therefore, this paper proposed two kinds of upper layer decoding methods; LLR-based decoding and hybrid decoding. By means of simulation we show that the performance of the proposed decoding algorithm is superior to that of the conventional one.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.12A
• /
• pp.1153-1160
• /
• 2005

OFDM/OQAM(Offset QAM)-IOTA system requires the IOTA(Isotropic Orthogonal Transform Algorithm) function that has superior localization property in time and frequency domain instead of guard interval used for conventional OFDM/QAM system to be robust to multipath channel. Therefore, OFDM/OQAM-IOTA system has more spectral efficiency than conventional OFDM/QAM system. But, when channel estimation scheme for conventional OFDM/QAM system is applied straightforwardly to OFDM/OQAM-IOTA system, an intrinsic Inter- symbol-Interference is observed. So suitable preamble structure for the channel estimation scheme of OFDM/OQAM-IOTA system is required. In this paper, we propose a new preamble structure that is appropriate to OPDM/OQAM-IOTA system and then perform ideal channel estimation and practical channel estimation in low-to-medium mobile speed and compare them with conventional OFDM/QAM system. Simulation results show that OFDM/OQAM-IOTA system with proposed preamble structure has 1.5 dB Eb/NO gain on Target BER $10^{-3}$ and about $25\%$ transmission rate gain against the conventional OFDM/QAM system considering quarter of FFT size as guard interval size.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.10A
• /
• pp.922-929
• /
• 2005

This paper proposes an adaptive pilot beacon equipment for mobile communication systems based on direct spread spectrum technology which generates the pilot channel for handoff between base stations by using the information acquired from the downstream wireless signal regarding the overhead channel information. Such an adaptive pilot beacon equipment will enable low power operation since among the wireless signals, only the pilot channel will be generated and transmitted. The pilot channel in the downstream link of the CDMA receiver is used to acquire time and frequency synchronization and this is used to calibrate the offset for the beacon, which implies that time synchronization using GPS is not required and any location where forward receive signal can be received can be used as the installation site. The downstream link pilot signal searching within the CDMA receiver is performed by FPGA and DSP. The FPGA is used to perform the initial synchronization for the pilot searcher and DSP is used to perform the offset correction between beacon clock and base station clock. The CDMA transmitter the adaptive pilot beacon equipment will use the timing offset information in the pilot channel acquired from the CDMA receiver and generate the downstream link pilot signal synchronized to the base station. The intermediate frequency signal is passed through the FIR filter and subsequently upconverted and amplified before being radiated through the antenna.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12B
• /
• pp.1371-1379
• /
• 2009

In this paper, we propose a new multi-path routing protocol to provide reliable and stable data transmission in MANET that is composed of high-mobility nodes. The new multi-path routing establishes the main route by the mechanism based on AODV, and then finds the backup route that node-disjoint from the main route by making add nodes in the main route not participate in it. The data transmission starts immediately after finding the main route. And the backup route search process is taking place while data is transmitted to reduce the transmission delay. When either of the main route or the backup route is broken, data is transmitted continuously through the other route and the broken route is recovered to node-disjoint route by the route maintenance process. The result of the simulation based on the Qualnet simulator shows that the backup route exists 62.5% of the time when the main route is broken. And proposed routing protocol improved the packet transmission rate by 2~3% and reduced the end-to-end delay by 10% compared with AODV and AODV-Local Repair.

• The Journal of the Korea Contents Association
• /
• v.12 no.12
• /
• pp.721-732
• /
• 2012

Patent information, which is generated under a specific, objective rule for a prolonged period of time, has the properties of technology, right, and management. Because of these characteristics of patents, patent analysis is used to identify R&D capacities and performances, and management strategies of a given nation or enterprise. In this paper, we analyze LTE essential patents which are key IPRs for implementing standardized LTE technology and major weapons in a global patent war. Total of 2,307 LTE essential patents, published and registered applications from European Telecommunications Standards Institute(ETSI)'s online IPR database as of January 2011, are analyzed in quantitative methods. The analysis results present status and statistics of LTE essential patents by major countries, applicant companies and technical fields. And a comparative study is done using 4 patent indices limited to the LTE essential patents issued in the United States. It is expected that results herein are useful for not only figuring out the technological competitiveness of countries and companies in LTE market, but also suggesting a guide to strategic IPR management for related industries.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.5
• /
• pp.61-69
• /
• 2017

The study on interference channel is very important information theoretically and many studies have been done on it. However, even in the simplest case, even in the case of two user interfering channels, the channel capacity is not yet known except in special cases. Recently, research on the multiplexing gain that shows the tendency of the transmission rate in the high signal to noise ratio (SNR) band has been actively carried out, instead of accurately grasping the channel capacity. Obtaining optimal multiplexing gain can reveal trends in channel capacity at high signal-to-noise ratio bands. In an interfering channel with two users, the best multiplexing gain can be obtained by eliminating the interference. However, recent research shows that when the number of users is more than three, the optimal multiplexing gain can not be obtained only by zero forcing and a new technique called interference sorting is needed. There are two types of interference sorting techniques. Beamforming A method of effectively separating signals and interference by properly selecting matrices and constructing structured codes using rational numbers and irrational numbers. The interference alignment technique can achieve optimal multiplexing gain in various environments such as interference channel, X channel, compound broadcast channel, and multi hop network for multi source multi destination. In recent years, it has also been applied to distributed storage. Lee et al., "Lattice Code Interference Alignment in Cooperative Multipoint Transmission (COMP) for Interference Channels of Three Users", Journal of the Institute of Electronics Engineers, vol.49-TC,no.6,2012. In this paper, the DoF of delayed channel information is obtained.