• Tribology and Lubricants
• /
• 제5권1호
• /
• pp.57-63
• /
• 1989

The soluble Mo-DTP compounds as lubricant additives for reducing friction and wear, increasing loadcarrying capacity, and as antioxidants is very important as a new additive developed in these day. The method of the compounds are described and the composition is analyzed with $^{31}$P NMR spectrometer. The wear test is conducted with 4-ball machine and the debris are analyzed by ferrography. Also the tribological performance of Mo-DTP compounds are compared with Moly Van L and Zn-DTP.

• Journal of the Korean Chemical Society
• /
• 제23권5호
• /
• pp.277-285
• /
• 1979

CNDO/2 calculations on $XC_6H_4CH_2Cl,\;where\;X = H,\;p-CH_3,\;p-NH_2\;and\;p-NO_2$, and on benzyl radicals, cations and anions have been carried out in order to investigate nonlinear Hammett behavior. Main conclusions reached are: 1. Benzyl chloride exhibits borderline behavior due to ${\sigma}-{\pi}$ conjugation between C-Cl bond and the ring-system. 2. The extent of mutual conjugation can be judged by $\pi$-charge and bond alternation and interfrontier level separation narrowing effects. 3.The electron donating para substituent reduces the HOMO AO coefficient of the benzylic carbon, while the electron withdrawing para substituent reduces the LUMO AO coefficient of the benzylic carbon.

• Analytical Science and Technology
• /
• 제11권3호
• /
• pp.189-193
• /
• 1998

Binary alloys, $MoRu_3$ and $MoRh_3$, have been prepared using arc melting furnace. Mo and the noble metals Ru and Rh are the constituents of metallic insoluble residues, which were found in the early days of the post-irradiation studies on uranium oxide fuels. Detailed structural informations about these alloys have not been reported on JCPDS files of ICDD (International Centre for Diffraction Data). The results of X-ray diffraction study showed that the alloy was crystallized in hexagonal close-packing, well known as ${\varepsilon}$-phase. The X-ray diffraction patterns of these alloys matched well to that of $WRh_3$ with $P6_3/mmc$ of space group. The lattice parameters, a and c, were calculated using the least squares extrapolation. It was found from X-ray photoelectron spectroscopic measurements that Mo on the surface of the alloy was oxidized to Mo(6+), which could be removed by sputtering with Ar ions for approximately 15 minutes. The changes in binding energy of Mo, Ru, and Rh on the surface of the alloy were not observed. Magnetic susceptibility measurements resulted in the typical Pauli-paramagnetic behavior in the temperature range of 2 to 300 K.

• Bulletin of the Korean Chemical Society
• /
• 제16권2호
• /
• pp.193-195
• /
• 1995

• Corrosion Science and Technology
• /
• 제2권1호
• /
• pp.12-17
• /
• 2003

The effects of Cr content and film formation potential on electronic behaviors of the passive film on Fe-Cr alloys were investigated in borate buffer solution. Influence of pH on passive films of both Fe-Cr and Fe-Cr-Mo alloys was also investigated. Mott-Schottky and cyclic voltammetry techniques were used to elucidate electronic behaviors of passive films and their electrochemical characteristics. AES analysis of passive films was carried out. Results showed that doping density decreased as Cr content and film formation potentials increased. The addition of Mo to Fe-Cr alloy had little influence on donor densities in pH 9.2 solution but some effects on the decrease in donor densities in pH 1.6 acidic solution.

• Journal of Powder Materials
• /
• 제1권1호
• /
• pp.60-65
• /
• 1994

When a commercial prealloyed Fe-powder(Fe-5Cr-lMo-2Cu-0.5P-3C) is liquid phase sintered at 116$0^{\circ}C$, liquid precipitates with various shapes form within solid grains during the initial stage of sintering. The shape of a liquid precipitate changes pith the increment of their size from sphere(with radius<0.3$\mu\textrm{m}$), a transient polyhedron with more than 7 faces(1~2 $\mu\textrm{m}$), cuboid(3~5 $\mu\textrm{m}$), and finally to sphere(>5 $\mu\textrm{m}$). The shapes of liquid precipitates closely resemble the growth shapes predicted on the basis of solid-liquid interfacial energy and the coherency strain energy with anisotropic elastic constants in the diffusion zone around the precipitates.

• Bulletin of the Korean Chemical Society
• /
• 제14권6호
• /
• pp.708-712
• /
• 1993

The Polymerization of p-chlorophenyl propargyl ether (CPE) was carried out using various transition metal catalysts. The catalytic activity of $MoCl_{5}$-based catalysts was greater than that of $WCl_6$-based catalysts. $MoCl_5$ alone and $MoCl_{5}$-cocatalyst systems polymerized CPE very effectively to give a high yield of poly(CPE). In most cases, the polymer yield was quantitative and the average molecular weight $({\bar{M}}n)$ was in the range of 9,000 and 17,000. The NMR, IR, UV-visible spectra indicated that the present poly(CPE) has a linear conjugated polyene structure having p-chlorophenyl oxymethylene substituent. The poly(CPE) was mostly dark-brown colored powder and was completely soluble in various organic solvents such as chloroform, methylene chloride, THF, chlorobenzene, etc. The X-ray diffraction analysis indicated that the present poly(CPE) is amorphous.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• 제13권1호
• /
• pp.6-12
• /
• 2000

In this study, molybdenum thin films were etched with Cl\ulcorner/(Cl\ulcorner+SF\ulcorner) gas mixing ratio in an magneti-cally enhanced reactive ion etching(MERIE) by the etching parameters such as rf power of 250 watts, chamber pressure of 100 mTorr and B-field of 30 gauss. The etch rate was 150nm/min under Cl\ulcorner/(Cl\ulcorner+SF\ulcorner) gas mixing ratio of 0.25. At this time, the selectivity of Mo to SiO\ulcorner, photoresist were respectively 0.94, 0.05. The surface reaction of the etched Mo thin films was investigated with X-ray photoelectron spectroscopy(XPS). It was analyzed that Mo peaks was mainly observed in Mo-O bonds formed MoO\ulcorner compounds and F was detected in Mo-F and O-F bonds. Cl peaks were detected by the peak of Cl 2p\ulcorner in Cl-Mo bonds of MoCl\ulcorner or MoO\ulcornerCl\ulcorner formulas. Almost all of both Cl and S atoms had been com-bined with Mo, respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• 제21권4호
• /
• pp.547-554
• /
• 2008

In performance, digestibility and slaughter trials, a total of forty five male weaned lambs were used to examine the effects of monensin and live yeast supplementations on growth performance, nutrient digestibility, carcass characteristics and ruminal fermentation parameters when the lambs were fed steam-flaked corn-based diets. Animals were allotted to one of three treatment diets in a completely randomized design. The three treatment diets were: (1) basal diet (CON) with steam-flaked corn as a sole grain source, (2) basal diet supplemented with monensin (MO), and (3) basal diet supplemented with live yeast (LY). Total average daily intake (ADI) was unaffected by MO and LY supplementations. LY supplementation increased (p<0.05) average daily gain (ADG) by 13.1% compared with the CON diet. Both MO and LY supplementations resulted in a significant improvement (p<0.05) of feed efficiency over the CON diet (4.47, 4.68 vs. 5.05). Hemicellulose digestibility was higher (p<0.05) for lambs in the LY supplementation group (62.4%) as compared with the CON group (55.7%), but no differences were observed in digestibilities of dry matter (DM), organic matter (OM), crude protein (CP), neutral detergent fiber (NDF) and acid detergent fiber (ADF). All carcass traits were not influenced by dietary supplementations. Ruminal pH in lambs fed the LY supplemental diet was more stable than that with the CON diet (6.57 vs. 6.17). Neither MO nor LY supplementation influenced the concentration of ruminal ammonia-N and total volatile fatty acid (VFA), and molar percentages of individual VFA. Plasma urea-N concentration was decreased (p<0.05) by MO and LY supplementations, while plasma ${\beta}$-hydroxybutyrate (BHBA), glucose and other blood parameters were unaffected. In conclusion, while both MO and LY supplementations had a positive impact on feed efficiency and LY supplementation stabilized ruminal pH and improved fiber utilization, none of the supplements had the capacity to significantly enhance the carcass characteristics.

• Resources Recycling
• /
• 제25권1호
• /
• pp.16-23
• /
• 2016

The separation behaviour of Mo and W from sulfuric acid solution by solvent extraction with Alamine 336 was investigated as a function of solution pH and extractant concentration. Selective extraction of Mo over W by Alamine 336 was obtained in the pH range of 3-5 with low amine concentration. The mixture of Alamine 336 and acidic extractants improved the separation factor between Mo and W and was in the following order: D2EPHA > PC88A > Decanol > Versatic acid. The stripping efficiency of Mo and W from the loaded mixture of Alamine 336 and D2EHPA was very poor, while complete stripping of Mo and W was possible from the mixture of Alamine 336 and Decanol by using a mixture of $NH_4OH$ and $NH_4Cl$.