• Asian Journal of Turfgrass Science
• /
• v.25 no.1
• /
• pp.79-88
• /
• 2011

The purpose of this study was to obtain information on rates and salinity levels of irrigation for growth of Kentucky bluegrass by minimizing the hazard of salt accumulation in the sand based growing medium. Root zone profile consists of 20 cm sand based top soil, 20 cm of coarse sand as layer to interrupt capillary rise and 10 cm of reclaimed paddy soil as a base of the root zone profile. Topsoil was a mixture of dredged sand and peat with a ratio of 95%: 5% by volume. The columns were soaked into 5 cm depth saline water reservoir with salinity level of 3-5 $dSm^{-1}$. Salinity levels of irrigation water were 0, 2 and 3 $dSm^{-1}$. Irrigation rates were 3.8, 5.7 and 7.6 mm $day^{-1}$ which were equivalent to 70%, 100% and 130% of average ET (evapotranspiration) rate of Kentucky bluegrass, and irrigation interval was 3 days. Salt accumulation was due to irrigated water and moved up water from shallow water base. At the end of second year, the accumulation of salt in the rootzone showed ECc of3.86, 4.7 and 5.1 $dSm^{-1}$, and SAR of 19.2, 23.9 and 27.5 when the salinities were 0, 2 and 3 dS $m^{-1}$, respectively. Irrigation rates of 100% and 130% of ET rate with saline water did not decrease ECe and SAR in growing media. The growth of KEG was influenced by irrigation rate in the $1^{st}$ year, however, salinity level was more critical in the $2^{nd}$ year. Compared to non-saline water, saline water of 2 and 3 dS $m^{-1}$ resulted in decreased visual quality by 3.2% and 16.5%, by 6.4% and 39.3% in clipping weight, and by 5.5% and 5.0% in root mass, respectively.

• Asian Journal of Turfgrass Science
• /
• v.21 no.1
• /
• pp.9-21
• /
• 2007

Research was initiated to examine establishment efficiency of zoysiagrass by plugging. Zoysiagrass is known to be a slowly establishing turfgrass species. Properly-treated zoysiagrass seed can speed up the establishment rate, while initial irrigation practice is intensively required after seeding. A planting method with small plugs($2.5{\times}2.5cm$) from seeding can overcome initial watering requirement. Establishment speed, however, can vary with planting dates, planting spaces, and plastic film cover in early stage. Establishment characteristics were investigated for two years by planting dates that were April 5, May 18, July 13, August 24 and October 29 in 2004 and April 6 in 2005. They were also compared with three different spaces($20{\times}20,\;25{\times}25,\;and\;30{\times}30cm$) and three different fertilizer levels(15, 30, and $45g\;N{\cdot}m^{-2}$). Ground coverage reached to 90% in plugs of 'Zenith' zoysiagrass planted on April 5. It increased suddenly in period of July to August, resulting in about 50% of full establishment rate. Establishment rates were significantly faster over 9% in plugs spaced at $20{\times}25cm$ than in those at $30{\times}30cm$. No significant differences were observed on the stolen number and stolen length in the study. Survival rate in zoysiagrass plug was over 90% at all plantings. These results demonstrated that zoysiagrass establishment using small plug from seeding is considered to be a safe and efficient method.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.11 no.1
• /
• pp.51-56
• /
• 2012

Purpose: Golf is a popular sports activity after total knee arthroplasty in old age patients. We evaluated golf and implant loosening through the radiologic method. We also evaluated correlation of patterns of golf activity and clinical outcome to suggest guidelines to the patients. Materials and Methods: We carried out a retrospective case-control study of 80 patients (80 knees) who underwent TKR between 2005 and 2008, and followed up more than 3 years. We divided patients who played golf after TKR as a study group and who did not participate sports activities as a control group. We calculated the sum of width of radiolucent line in 7 sections around femoral component, 7 sections around tibial components and 5 sections in patella component using American Knee Society Roentgenographic Evaluation and Scoring system respectively. The inclusion criteria, was BMI (body mass index) was between 25 and $30kg/m^2$, and UCLA activity-level rating System score was between 5 and 8. We also got the information of patients' patterns of golf activities such as 1. the interval from surgery to return to golf activity. 2. the frequency of golf activities 3. using spike or cart. We obtained the information from patient's questionnaire and telephone interview. We compared with the VAS (visual analogue scale) respectively. And handicaps and driving distance was evaluated as well. Results: The study group's mean sum of radiologic score was 0.84 mm and 0.69 mm in control group. This is not statistically significant (p=0.22). Too early returning to golf (p=0.01) and left knee replacement (p<0.01) were statistically significant factors affecting clinical outcomes of golf activities after total knee arthroplasty. Conclusion: We concluded that golf activities after total knee arthroplasty is not correlated with radiographic loosening, and we need to give an explanation to the patients about increased pain when returing to golf too early and left side arthroplasties.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.4
• /
• pp.413-433
• /
• 1994

Jinhae Bay once was a productive area of fisheries. It is, however, now notorious for its red tides; and oxygen deficient water-masses extensively develop at present in summer. Therefore the shellfish production of the bay has been decreasing and mass mortality often occurs. Under these circumstances, the three-dimensional numerical hydrodynamic and the material cycle models, which were developed by the Institute for Resources and Environment of Japan, were applied to analyze the processes affecting the oxygen depletion and also to evaluate the environment capacity for the reception of pollutant loads without dissolved oxygen depletion. In field surveys, oxygen deficient water-masses were formed with concentrations of below 2.0mg/l at the bottom layer in Masan Bay and the western part of Jinhae Bay during the summer. Current directions, computed by the $M_2$ constituent, were mainly toward the western part of Jinhae Bay during flood flows and in opposite directions during ebb flows. Tidal currents velocities during the ebb tide were stronger than that of the flood tide. The comparision between the simulated and observed tidal ellipses showed fairly good agreement. The residual currents, which were obtained by averaging the simulated tidal currents over 1 tidal cycle, showed the presence of counterclockwise eddies in the central part of Jinhae Bay. Density driven currents were generated southward at surface and northward at the bottom in Masan Bay and Jindong Bay, where the fresh water of rivers entered. The material cycle model was calibrated with the data surveyed in the field of the study area from June to July, 1992. The calibrated results are in fairly good agreement with measured values within relative error of $28\%$. The simulated dissolved oxygen distributions of bottom layer were relatively high with the concentration of $6.0{\sim}8.0mg/l$ at the boundaries, but an oxygen deficient water-masses were formed within the concentration of 2.0mg/l at the inner part of Masan Bay and the western part of Jinhae Bay. The results of sensitivity analyses showed that sediment oxygen demand(SOD) was one of the most important influence on the formation of oxygen depletion. Therefore, to control the oxygen deficient water-masses and to conserve the coastal environment, it is an effective method to reduce the SOD by improving the polluted sediment. As the results of simulations, in Masan Bay, oxygen deficient water-masses recovered to 5.0mg/l when the $50\%$ reduction in input COD loads from Masan basin and $70\%$ reduction in SOD was conducted. In the western part of Jinhae Bay, oxygen deficient water-masses recovered to 5.0mg/l when the $95\%$ reduction in SOD and $90\%$ reduction in culturing ground fecal loads was conducted.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.5-5
• /
• 2011

The research and development of hybrid electric vehicle (HEV), plug-in hybrid electric vehicle (PHEV) and electric vehicle (EV) are intensified due to the energy crisis and environmental concerns. In order to meet the challenging requirements of powering HEV, PHEV and EV, the current lithium battery technology needs to be significantly improved in terms of the cost, safety, power and energy density, as well as the calendar and cycle life. One new technology being developed is the utilization of composite cathode by mixing two different types of insertion compounds [e.g., spinel $LiMn_2O_4$ and layered $LiMO_2$ (M=Ni, Co, and Mn)]. Recently, some studies on mixing two different types of cathode materials to make a composite cathode have been reported, which were aimed at reducing cost and improving self-discharge. Numata et al. reported that when stored in a sealed can together with electrolyte at $80^{\circ}C$ for 10 days, the concentrations of both HF and $Mn^{2+}$ were lower in the can containing $LiMn_2O_4$ blended with $LiNi_{0.8}Co_{0.2}O_2$ than that containing $LiMn_2O_4$ only. That reports clearly showed that this blending technique can prevent the decline in capacity caused by cycling or storage at elevated temperatures. However, not much work has been reported on the charge-discharge characteristics and related structural phase transitions for these composite cathodes. In this presentation, we will report our in situ x-ray diffraction studies on this mixed composite cathode material during charge-discharge cycling. The mixed cathodes were incorporated into in situ XRD cells with a Li foil anode, a Celgard separator, and a 1M $LiPF_6$ electrolyte in a 1 : 1 EC : DMC solvent (LP 30 from EM Industries, Inc.). For in situ XRD cell, Mylar windows were used as has been described in detail elsewhere. All of these in situ XRD spectra were collected on beam line X18A at National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory using two different detectors. One is a conventional scintillation detector with data collection at 0.02 degree in two theta angle for each step. The other is a wide angle position sensitive detector (PSD). The wavelengths used were 1.1950 ${\AA}$ for the scintillation detector and 0.9999 A for the PSD. The newly installed PSD at beam line X18A of NSLS can collect XRD patterns as short as a few minutes covering $90^{\circ}$ of two theta angles simultaneously with good signal to noise ratio. It significantly reduced the data collection time for each scan, giving us a great advantage in studying the phase transition in real time. The two theta angles of all the XRD spectra presented in this paper have been recalculated and converted to corresponding angles for ${\lambda}=1.54\;{\AA}$, which is the wavelength of conventional x-ray tube source with Cu-$k{\alpha}$ radiation, for easy comparison with data in other literatures. The structural changes of the composite cathode made by mixing spinel $LiMn_2O_4$ and layered $Li-Ni_{1/3}Co_{1/3}Mn_{1/3}O_2$ in 1 : 1 wt% in both Li-half and Li-ion cells during charge/discharge are studied by in situ XRD. During the first charge up to ~5.2 V vs. $Li/Li^+$, the in situ XRD spectra for the composite cathode in the Li-half cell track the structural changes of each component. At the early stage of charge, the lithium extraction takes place in the $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component only. When the cell voltage reaches at ~4.0 V vs. $Li/Li^+$, lithium extraction from the spinel $LiMn_2O_4$ component starts and becomes the major contributor for the cell capacity due to the higher rate capability of $LiMn_2O_4$. When the voltage passed 4.3 V, the major structural changes are from the $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component, while the $LiMn_2O_4$ component is almost unchanged. In the Li-ion cell using a MCMB anode and a composite cathode cycled between 2.5 V and 4.2 V, the structural changes are dominated by the spinel $LiMn_2O_4$ component, with much less changes in the layered $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component, comparing with the Li-half cell results. These results give us valuable information about the structural changes relating to the contributions of each individual component to the cell capacity at certain charge/discharge state, which are helpful in designing and optimizing the composite cathode using spinel- and layered-type materials for Li-ion battery research. More detailed discussion will be presented at the meeting.

• Journal of Gastric Cancer
• /
• v.8 no.1
• /
• pp.9-19
• /
• 2008

Purpose: Gastric cancer is the most common malignant tumor in Korea. We reviewed the cases at our institution to identify the survival rates and clarify the prognostic factors of patients with gastric cancer. Materials and Methods: We conducted a retrospective study of 6,918 patients who had received a diagnosis of gastric cancer, and they underwent surgery at Korea Cancer Center Hospital during a 15-year period from 1991 to 2005. Results: The overall 5-year survival rate was 66.8%. The univariate analysis revealed that age, location of tumor, gross type of tumor, the histology according to the WHO classification, the Lauren classification, depth of invasion (T stage), lymph node metastasis (N stage), distant metastasis (M stage), the type of surgery, the UICC TNM stage, postoperative complications, adjuvant chemotherapy, lymphatic invasion, venous invasion and perineural invasion were the significantly different factors of the survival rates. The multivariate analysis revealed that age, Borrmann type 4, the histology according to the WHO classification, depth of invasion (T stage), lymph node metastasis (N stage), distant metastasis (M stage), the type of surgery, UICC TNM stage, postoperative complications, adjuvant chemotherapy and lymphatic invasion were the independent prognostic factors. Conclusion: We have shown a statistically significant association between the survival rates after operation for gastric cancer and the clinicopathologic factors. Early diagnosis of gastric cancer, appropriate surgeryand adjuvant therapy might improve the quality of life and the survival rates of gastric cancer patients.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.1
• /
• pp.171-180
• /
• 2003

The development of calvarial bones is tighly co-ordinated with the growth of the brain and needs of harmonious interactions between different tissues within the calvarial sutures. Premature fusion of cranial sutures, known as craniosynostosis, presumably involves disturbance of these interactions. Mutations in the homeobox-containg gene Msx2 cause human craniosynostosis syndrome. Msx genes, which are consist of Msx1, Msx2 and Msx3, are homeobox-containg transcripton factors, and were originally identified as homologue of Drosophila msh(muscle segment homeobox) gene. Msx1 and Msx2 genes, expressed mostly in overlapping patterns at multiple site of tissue interactions during vertebrate development, are associated with epithelial-mesenchymal interactions during organogenesis, targets of BMP and FGF signaling. To elucidate the function of Msx genes in the early morphogenesis of mouse cranial suture, we analyzed the expression of them by in situ hybridization during embryonic(E15-E18) stage, and did vivo experiments in E15.5 mouse using rhBMP-2, rhFGF-2 protein soaked bead. In the sagittal suture, Msx1 was expressed in the mesenchyme of suture and the dura mater, Msx2 was intensely expressed in the sutural mesenchyme and the dura mater. In the coronal suture both of Msx genes were expressed intensely in the sutural mesenchyme and expressed in the periosteum also. Msx1 had a broader expression pattern than Msx2. BMP2 beads induced expression of both Msx1 and Msx2, FGF2 beads induced expression of Msx1, but not Msx2. Taken together, these data suggest that Msx1 and Msx2 genes have important role in regulating the morphogenesis and maintenance of embryonic cranial suture. Both of Msx genes are expressed similarly but because of their upstream signaling, they function dependently or cooperatively according to change of signaling molecule.

• Korean Journal of Poultry Science
• /
• v.35 no.1
• /
• pp.85-99
• /
• 2008

Avian reovirus (ARV) is a causative agent of viral arthritis/tenosynovitis, and malabsorption syndrome in broiler. The characteristics of malabsorption syndrome caused by ARV are diarrhea, poor feed conversion and stunting. Therefore, ARV infection has been recognized as one of the most important disease in the poultry industry because of economical losses. However, few study of ARV infection in broiler industry has been conducted in Korea. To evaluate the presence of ARV infection in broiler farms, epidemiological survey such as serological test and virus isolation has been conducted. For the serological survey using ELISA method, we selected five broiler farms which were located at different area and had a history of growth retardation, lameness, diarrhea and poor feathering. From these farms serum samples were collected at 1 day, 14 days and market age. All these farms had no history of vaccination against ARV. In addition to serological survey, we tried to isolate ARV from birds of designated farms at market age and collected feces and tissue samples such as cecal tonsil, intestine and liver. We were identified ARV by RT-PCR and transmissible electron microscopy. The samples were inoculated into 9-day-old embryonated eggs via the chorioallantoic membrane to observe the pock formation. For the pathogenicity test of ARV isolates, we inoculated with the isolates to the right footpad of 3-week-old SPF chicks and observed clinical signs and pathological changes for 14 days after challenge. Most broilers sampled for serological survey have maternal antibodies which were widely distributed at 1 day and decreased by 14 days. However, at the market age several broiler farms showed fairly high antibody titer against ARV. This increase of antibody titer at market age means the possible infection of ARV during the grow-out period. Among total 15 samples for the isolation of ARV. 2 samples were positive by RT-PCR and finally identified as a ARV. We inoculated these isolates in the SPF birds and observed that the antibody titer was increased from 7 days after challenge. However, we did not find any clinical signs both control and challenge groups. Based on the above results, it is clear that the ARV infection has been circulated in the broiler industry and caused significant economic losses. Further study is needed to evaluate the virulence of the isolates in the digestive system of broiler and the molecular characteristics of isolates.

• Journal of the Korean Geophysical Society
• /
• v.3 no.1
• /
• pp.57-66
• /
• 2000

The location and geometry of the Ulsan Fault play important roles in interpreting tectonic evolution of the southeastern part of the Korean Peninsula. Dipole-dipole electrical resistivity surveys and seismic refraction surveys were carried out in the Yaksoo area, Ulsan in order to measure the thickness of the alluvium covering the Ulsan Fault and to find associated fracture zones and possibly the location of its major fault plane. The collected data were analyzed and interpreted. Some results reported previously by others were also used in this interpretation. No low resistivity anomalies were found in the cross-sectional resistivity image of the survey line located in the east of the Dong River. In contrast, well-developed continuous low resistivity anomalies were detected in the west of the Dong River. This strongly suggests that the major fault plane of the Ulsan Fault is located under or in the west part of the Dong River. Two refraction boundaries corresponding to the underground water level and the bottom of the alluvium were found by refraction surveys carried out on the limited part of the east survey line. The thickness of the alluvium was found to be about 30 m. Small faults in the basement rock identified by reflection surveys were not detected by both resistivity and refraction seismic surveys. This might be explained by assuming that low resistivity anomaly is more closely related to the clay contents than the water contents. On the other hand, it may be resulted by the limited resolution of the resistivity and refraction surveys. Detailed study is required to clarify the reason. Resistivity survey is frequently considered to be a good exploration method to detect subsurface faults. However, it appears to be less useful than reflection seismic survey in this work. In dipole-dipole resistivity survey, the number of separation should be increased to survey deeper subsurface with the same resolution. However, signal to noise ratio decreases as the number of separation increases. In this survey area, the signal to noise ratio of up to sixteen separations was good enough based on the statistical properties of measurements.

• Restorative Dentistry and Endodontics
• /
• v.35 no.3
• /
• pp.188-197
• /
• 2010

The purpose of this study was to compare radiopacity and radiographic discriminability of various FRC-Posts. Six FRC-Posts were investigated ; 1) FRC Postec Plus (Ivoclar Vivadent AG, Schaan, Liechtenstein), 2) Snowlight (Carbotech, Lewis center, OH, USA), 3) Dentin Post (Komet Brasseler, Lamgo, Germany), 4) Rely-X Fiber Post (3M ESPE, St.paul, MN, USA), 5) D.T.-Light Post (BISCO, Schaumburg, IL,USA), 6) Luxapost (DMG, Hamburg, Germany) The radiographs of each post with a reference 1 mm / 2 mm aluminum step-wedge was taken using digital sensor. The optical density were calculated by gray value of $10{\times}10$ pixel and compared in mm Al equivalent at five points. Six maxillary incisors of similar radiopacity were used. Radiographs of posts in Mx. incisors of lingual side of dry mandible were taken. We showed radiographs and asked the questionnaire to 3 radiologists, 3 endodontists, 3 general practitioners. The questionnaire was comprised of choices of the highest, lowest radiopaque individual post and the choices of best discriminable post at apical, coronal area. The following results were obtained. 1. Each post system showed various radiopacity. 2. There was change of discriminability between each post and simulated specimens regardless of examiner. Although each post showed various radiopacity, the difference of radiopacity did not affect on discriminability.