• Asian-Australasian Journal of Animal Sciences
• /
• v.3 no.1
• /
• pp.15-20
• /
• 1990

The nutritional status of trace minerals in cattle of Java in Indonesia was investigated by evaluating Cu, Fe, Mo, Zn and Mn concentrations in diets and livers, and Cu and Zn concentrations in blood plasma. Investigations were conducted on Jonggol (West Java), Malang (East Java) and Mojokerto (East Java) in both the rainy and the dry seasons in 1988. In Jonggol, low Cu concentrations in diets showing 7.1 mg/kg in the rainy season and 10.9 mg/kg in the dry season were observed and all plasma samples showed Cu concentrations below the critical level ($0.65{\mu}g/ml$). Thirty percent of the liver samples in Malang and 54% of those in Mojokerto showed lower Cu concentrations than the critical level (75 mg/kg on a dry matter basis). Fe concentrations in diets from the three regions showed a wide variation of values ranging from 249 to 30,000 mg/kg. A large amount of Fe was accumulated in livers from Malang and Mojokerto, giving average concentrations of 498 mg/kg. Zn concentration in diet and plasma samples were close to the borderline and some Zn concentration in these samples showed deficient levels. Mo and Mn concentrations in diets and livers showed normal levels.

• Economic and Environmental Geology
• /
• v.31 no.5
• /
• pp.375-388
• /
• 1998

The purpose of this study is to investigate the ore genesis and occurrence of the Wondong polymetallic mineral deposits. The Pb-Zn, Fe and W-Mo mineralizations are found in skarn zones which formed mainly in or along the fault shear zones with the $N25-40^{\circ}W$ and $N10-50^{\circ}E$ directions, whereas the Cu-Mo mineralization is appeared hydrothermal replacement zone. The skarn minerals consist mainly of garnet and epidote, which were the last alteration phases between pneumatolytic and hydrothermal stages. The mineral paragenesis toward the late stage are as follows: arsenopyrite, scheelite, magnetite, pyrite, pyrrhotite, sphalerite, galena, chalcopyrite and molybdenite. Average ore grades are 0.33 g/t Au, 46.29 g/t Ag, 0.06% Cu, 4.4% Pb, 2.61% Zn and 29.39% Fe in tunnels, and 0.31 % Cu, 0.52% Pb, 6.29% Zn, 29.29% Fe, 0.03% Mo and 0.12% $WO_3$ in drill cores. Fluid inclusion data shows that Type I (liquid-rich), Type II (vapor-rich) and Type III (halite-bearing) inclusions are coexisted and their homogenization temperatures are quite similar. This indicates that boiling conditions have been reached during the mineralization. It is also likely that the ore solutions were evolved through the mixing between magmatic and meteoric waters. Rhyolite and quartz porphyry far the mineralization probably are not responsible of the Wondong polymetallic mineral deposits.

• Journal of Plant Biology
• /
• v.16 no.3_4
• /
• pp.40-44
• /
• 1973

Hawkeye(Fe-chlorosis resistant) and PI 54619-5-1(Fe-chlorosis sensitive) soybeans were grown with and without DPTA(diethylene triamine pentaacetic acid) in Yolo loam soil. The major purpose of the study was to compare leaf-stem distribution of microelements for different treatments which increase concentrations of microelements in plants to evaluate the role of the chelating agent in increasing translocation of the microelements. Plant responses and yields were recorded and Fe, Mn, Zn, Cu, Al, Co, N, Sn, Pb and Mo contents of leaves and stems were determined by emission spectrography. Sulfur(soil pH4) increased leaf concentrations of Mn, Zn, Cu, CO, Ni, Sn and Pb. DTPA, particularly at 50ppm in soil, increased leaf concentrations of Fe, Mn, Zn, Cu, Co, Ni and Mo. It increased Ti in leaves for the PI 54619-5-1 soybeans only. DTPA increased the ratios of the concentration in leaves to that in stems for Fe, Zn, Cu, Al, Ti, CO, Ni and Mo. Sulfur which increased the microelement concentration in both leaves and stems did not have this effect. DTPA increased the ratio at soil pH 6 and 8.5 in leaves to that in stems of the bush bean plants for Fe, Zn, Cu, Ni, but to a lesser extent in bush beans than in soybeans. PI 54619-5-1 soybeans tended to contain less of most of the metals than did Hawkeye soybeans.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.934-937
• /
• 2003

Glasses in the system $CuO-P_2O_5-V_2O_5$ were prepared by a press-quenching method on the copper plate. The glass-ceramics from these glasses were obtained by post-heat treatment, and the crystallization behavior and DC conductivities were determined. The conductivities of the glasses were range from $10^{-6}s.Cm^{-1}$ at room temperature, but the conductivities of the glass-ceramics were $10^{-3}s.Cm^{-1}$ increased by $10^3$ order. The crystalline product in the glass-ceramics was $CuV_2O_6$. Heat-treatment conditions influenced the crystal growth of $CuV_2O_6$ and conductivity. The linear relationship between in (${\sigma}T$) and $T^{-1}$ suggested that the electrical conduction in the present glass-ceramics would be due to a small polaron hopping(SPH) mechanism.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.318-318
• /
• 2010

전기로를 이용하여 셀렌화한 $CuInSe_2$ (CIS)박막에 대해 연구한 결과를 발표하고자 한다. 화석연료의 과도한 사용으로 지구온난화의 환경문제가 대두되면서 영구적이고 무상의 태양에너지 이용에 대한 필요성이 점차 높아지고 있다. 빛에너지를 전기에너지로 변화시키기 위한 태양전지는 재료에 따라 다양하게 개발되고 있으며 그 중 가장 주목을 받고 있는 것 중의 하나가 $CuInSe_2$을 흡수층으로 하는 CIS 박막 태양전지이다. CIS 박막은 태양전지의 흡수층으로 사용되는데 직접천이형 밴드구조를 가지고 있고, 약 $10^5\;cm^{-1}$의 높은 광흡수계수를 가지고 있어 태양전지의 흡수층으로 적합한 물질로 각광받고 있다. 에너지 밴드갭이 1eV로 실리콘과 유사한 밴드갬을 가지고 있으나 이는 Ga, Al을 In 대신 치환함으로 조절할 할 수 있다. 무엇보다도 유리와 같은 저가의 기판위에 스퍼터와 같은 장치로 대면적 CIS 태양전지를 만들수 있다는 것이 산업적인면에서의 장점으로 알려져 있다. 본 연구에서는 $50mm{\times}50mm$ 넓이의 sodalime 유리판을 기판으로 하여 CIS 박막을 제조하고 연구하였다. 스퍼터를 이용하여 유리기판 위에 Mo (Molybdenum) 을 증착하고 그 위에 Cu-In막을 증착하였다. Cu-In/Mo/유리기판 시료는 전기로에 도입되어 셀렌화 처리 하였다. 전기로는 $10^{-1}$ Torr 정도의 진공을 수분간 유지하여 반응할 수 있는 공기(산소)를 제거하였다. 진공 혹은 5N의 고순도 질소를 흘려주며 열을 가하여 셀렌화를 하였다. 전기로에는 1g의 셀레늄(Se)이 Cu-In/Mo/유리기판 시료와 함께 도입되었다. Se이 Cu-In 막과 높은 반응성을 갖도록 Se과 Cu-In 시료는 그라파이드 상자에 함께 넣었고, 그라파이트 상자는 전기로에 넣어 셀렌화하였다. 셀렌화 온도는 $400^{\circ}C{\sim}500^{\circ}C$까지 변화시켜 가며 CIS 박막을 제조하였으며 그 물성도 조사하였다. 물성 조사는 사진, 현미경, SEM, EDX, XRD, Hall effects를 이용하였다. 셀렌화 온도가 $450^{\circ}C$ 이상에서는 CIS 박막의 흡착성이 낮아 CIS 박막이 Mo 표면에서 떨어짐을 알 수 있었다. 셀렌화 후 박막에 함유된 Se은 48%~49% 정도있었다. 제조된 CIS 박막시료를 SEM으로 확인한 결과 생성된 CIS/Mo 사이에 계면층이 생겼있음 알 수 있었다. 이러한 계면층은 $MoSe^2$층으로 사료되고, 셀렌화 온도가 높으면 계면층의 두께도 증가되는 경향을 보였다. 셀렌화 온도가 높아질수록 많은 양의 산소가 CIS 박막에 들어가는 것도 알 수 있었다. 학술회의에서 보다 깊은 조사결과를 발표하고자 한다.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.11
• /
• pp.2299-2302
• /
• 2008

• Korean Journal of Crystallography
• /
• v.15 no.2
• /
• pp.99-103
• /
• 2004

The structure of $C_{16}H_{19}O_2N_3CuCl_2\;{\cdot}\;H_2O$ has been determined by X-ray diffraction methods. The crystal system is triclinic, space group Pl, unit cell constants. $a=7.6202(9)\; \AA,\; b=8.5943(7) \AA,\; c= 8.6272(6) \AA,\; \alpha= 67.518(6)^{\circ}.\; \beta= 68.043(8)^{\circ},\; \gamma=74.370(8)^{\circ},\; V=478.89(8)\; \AA^3,\; T=295K,\; Z=1,\; D_c=1.504Mgm^{-3}$The intensity data were collected on an Enraf-Nonius CAD-4 Diffractometer with graphite monochromated $MoK\alpha$ radiation $(\alpha=0.7107\;\AA)$. The molecular structure was solved by direct method.』 and refined by full-matrix least squares to a final $R=2.47\%$ for 1659 unique observed $F_0>4\sigma(F_0)$ reflections and 234 parameters.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.451-454
• /
• 2006

WGS reaction over Mo2C and ceria based catalysts was investigated to develop an alternative commercial Cu-Zn/Al2O3 catalyst for fuel processor and hydrogen station. The Mo2C catalysts were prepared by a temperature programmed method and the various metal supported cerium oxide catalysts were prepared by an Impregnation method. The catalysts were characterized by the N2 physisorption, Co chemisorption, XRD, TEM and TPR. It was found that Mo2C and 0.2wt% Pt-40wt%, Ni/CeO2 catalysts had higher activity and stability than the Cu-Zn/Al203 above $260^{\circ}C$. Moreover, CO conversion of more than 85% was observed at $280{\sim}300^{\circ}C$. But all catalysts were deactivated during the thermal cycling runs. The results suggest that these catalysts are an attractive candidate for the alternative Cu-Zn/Al2O3 catalyst for fuel processor and hydrogen station applications.

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.5 no.1
• /
• pp.54-60
• /
• 2019

Sentinel lymph node (SLN) imaging plays an important role in surgery of patients with breast cancer and melanoma. In this study, avidin (Av), a tetrameric protein glycosylated with mannose and N-acetylglucosamine molecules, was labeled with $^{64}Cu$ and then evaluated for LN imaging. $^{64}Cu$-Labeled $NeutrAvidin^{TM}$ (NAv), a non-glycosylated form of Av, was used for comparison. 1,4,7,10-Tetraazacyclododecane-N,N',N'',N'''-tetraacetic acid (DOTA)-conjugated Av and NAv were prepared from the corresponding proteins and DOTA-NHS ester, which were then labeled with copper-64 and purified using PD-10 columns. The numbers of DOTA molecules conjugated to Av and NAv were 4.9 and 3.3, respectively. [$^{64}Cu$]Cu-DOTA-conjugated Av and NAv were prepared in 93% and 73% radiochemical yields, respectively. In vitro serum stability study showed that copper-64 remained stable on all radiotracers for 24 h (>97%). MicroPET/CT images showed that high radioactivity was accumulated in LNs within 15 min after footpad-injection of radiotracers. Tissue distribution data of mice demonstrated significantly higher uptake in the popliteal (PO) LN than lumbar (LU) LN for $^{64}Cu$-labeled Av (relative % ID/g excluding the injection sites: 66.2% and 26.0%, respectively) compared with those of $^{64}Cu$-labeled NAv (43.0% and 49.2%, respectively). The results of this study suggest that mannose molecules on Av enabled the radiotracer to retain in the first LN after mouse footpad-injection.

• Current Photovoltaic Research
• /
• v.10 no.2
• /
• pp.39-48
• /
• 2022

A Se-containing Cu/SnSe₂/ZnSe precursor was employed to introduce S to the precursor to form Cu₂ZnSn(S,Se)₄ (CZTSSe) film. The morphology of CZTSSe films strongly varied with two different pre-annealing environments: S and N₂. The CZTSSe film with S pre-annealing showed a dense morphology with a smooth surface, while that with N₂ pre-annealing showed a porous film with a plate-shaped grains on the surface. CuS and Cu₂Sn(S,Se)₃ phases formed during the S pre-annealing stage, while SnSe and Cu₂SnSe₃ phases formed during the N₂ pre-annealing stage. The SnSe phase formed during N₂ pre-annealing generated SnS₂ phase that had plate shape and severely aggravated the morphology of CZTSSe film. The power conversion efficiency of the CZTSSe solar cell with S pre-annealing was low (1.9%) due to existence of Zn(S.Se) layer between CZTSSe and Mo substrate. The results indicated that S pre-annealing of the precursor was a promising method to achieve a good morphology for large area application.