• 한국분말재료학회지
• /
• 제5권1호
• /
• pp.64-70
• /
• 1998

Milling media of steel and partially stabilized zirconia(PSZ) were used to produce $Mo_3$Si by mechanical alloying(MA) of Mo-25.0at%Si elemental powder mixture. The effect of milling medium materials on MA of the powder mixture have been investigated by XRD and DTA. The reaction rate and the end-product noticeably depended upon the milling medium material. The formation of $Mo_3$Si and $Mo_5Si_3$phases by PSZ ball-milling took place after 15 hr of MA and was characterized by a slow reaction rate as Mo, Si, $Mo_5Si_3$ and $Mo_3$Si coexisted for a long period of milling time. The formation of a new phase by steel ball-milling, however, did not take Place even after 96 hr of MA. DTA and annealing results showed that $Mo_5Si_3$ and $Mo_3$Si were formed after heating the ball-milled powder specimens to different temperatures. At low temperatures, Mo and Si were transformed into $Mo_5Si_3$. At high temperatures, the formation of $Mo_3$Si can be partially attributed to the reaction, 7Mo+Si+$Mo_5Si_3$-.4$Mo_3$Si . The formation of $Mo_3$Si and Mo5Si3 phases by mechanical alloying of the powder mixture and the relevant reaction rate appeared to depend upon the milling medium material as well as the thermodynamic properties of the end-products.

• 한국분말재료학회지
• /
• 제4권3호
• /
• pp.179-187
• /
• 1997

Milling media of steel and zirconia were used to produce $MoSi_2$ by mechanical alloying (MA) of Mo and Si powders. The effect of milling media on MA of Mo-65.8at%Si powder mixture has been investigated by SEM, XRD, DTh and in-situ thermal analysis. The powders mechanically alloyed by milling medium of steel for 8 hours showed the structure of fine mixture of Mo and Si, and those mechanically alloyed by milling medium of zirconia for longer milling time showed the structure of fine mixture of Mo and Si. The tetragonal $\alpha$-$MoSi_2$ Phase and the tetragonal $Mo_5Si_3$ phase appeared with small Mo peaks in the powders milled by milling medium of steel for 4 and 8 hours. The $\alpha$-$MoSi_2$ phase and the hexagonal $\beta$-$MoSi_2$ phase were formed after longer milling time. The $\alpha$-$MoSi_2$ phase appeared with large Mo peaks in the powders milled by milling medium of zirconia for 4 hours. The phases, $\alpha$-$MoSi_2$ and $\beta$-$MoSi_2$. were formed in the powders milled for longer milling time. DTA and annealing results showed that Mo and Si were transformed into $\alpha$-$MoSi_2$ and $Mo_5Si_3$, while $\beta$-$MoSi_2$ into $\alpha$-$MoSi_2$. In-situ thermal analysis results demonstrated that there were a sudden temperature rise at 212 min and a gradual increase in temperature in case of milling media of steel and zirconia, respectively. The results indicate that MA can be influenced by materials of milling medium which can give either impact energy on powders or thermal energy accumulated in vial.

• International Journal of Ocean System Engineering
• /
• 제2권4호
• /
• pp.244-249
• /
• 2012

In this study, a monolithic MoSi2 matrix reinforced with 20 vol% SiC particles, a SiC/MoSi2 composite matrix reinforced with 20 vol% ZrO2 particles, and a ZrO2/MoSi2 composite were fabricated using hot press sintering at $1350^{\circ}C$ for 1 h under a pressure of 30 MPa. The Vickers hardness and sliding wear resistance of the monolithic MoSi2, ZrO2/MoSi2, and SiC/MoSi2 composite were investigated at room temperature. A wear behavior test was carried out using a disk-type wear tester with a silicon nitride ball. The ZrO2/MoSi2 composite showed an average Vickers hardness value and excellent wear resistance compared with the monolithic MoSi2 and SiC/MoSi2 composite at room temperature.

• 한국세라믹학회지
• /
• 제32권9호
• /
• pp.1085-1091
• /
• 1995

Molybdenum disilicide (MoSi2) was synthesized from Mo, MoO3, Si and Al powders by self-propagating high temperature synthesis (SHS). The effect of processing parameters such as Mo/MoO3 molar ratio, Ar gas pressure in the reactor and pressing pressure of compacts in synthesis of MoSi2 were investigated. h-MoSi2 was transformed into t-MoSi2 with increasing the Mo/MoO3 mole ratio, and only t-MoSi2 phase was identified above 3.5 : 1 (molar ratio). The synthesized phases did not change with the variation of Ar gas pressure and pressing pressure of compacts. It was found that the combustion temperature was above 2,50$0^{\circ}C$. The products were separated into MoSi2 (s) and $\alpha$-Al2O3 by the difference of their specific grativities. Bending strength, hardness and density of sintered specimen exhibited 82 MPa, 5.368 GPa and 5.43 g/㎤, respectively.

• 한국세라믹학회지
• /
• 제33권11호
• /
• pp.1209-1216
• /
• 1996

MoSi2-Al2O3 composites were prepared by thermal explosion mode of self-propagating high temperature syn-thesis (SHS) using element powders of MoO3 Mo Si and Al. The combustion products of MoSi2 which have 10, 20, 30 and 40 wt% Al2O3 showed the molten state in the range of Mo to MoO3 6:1-9.5:1, 2:1-8:1, 1:1-5:1, and 1:1-3:1 (molar ratio) respectively. The combustion products which made least seperation the molten phase from the slag phase were in Mo/MoO3=9, 5:1, 8:1, 5:1 and 3:1 (molar ratio) respectively. Particles size of MoSi2 and Al2O3 in the combustion product were decreased as the molar ratio of Mo to MoO3 increase. By XRD analysis only MoSi2 and $\alpha$-Al2O3 peaks were identified in the combusion products, In case of MoSi2 containing 20wt% Al2O3 5.1wt% Al existed into MoSi2 grains and 30.7wt% Si and 7.7wt% Mo existed into Al2O3 grains. The relative density of MoSi2 containing 10, 20, 30 and 40 wt% Al2O3 were 82.7, 85.2, and 81.9% respectively. The fracture strength of MoSi2-Al2O3 composites increased with increasing Al2O3 and that of MoSi2-20wt% Al2O3 composite was 195 MPa.

• 한국주조공학회지
• /
• 제10권3호
• /
• pp.225-234
• /
• 1990

Spheroidal graphite cast irons which are Fe-3%C-(4－6)%Si-(0－0.5)%Mo were studied to improve not only heat resistance but also mechanical properties. With increasing Mo content, the graphitization was decreased and carbide volume fraction was increased. The graphite spheroidization ratio was not decreased in Fe-3%C-6%Si-Mo system cast iron with increasing Mo content, but that was decreased in Fe-3%C-4%Si-Mo system and Fe-3%C-5%Si-Mo system cast irons. Hardness was increased with the Si and Mo contents. At constant Si content, tensile strength was increased with increasing Mo content, but that was decreased at 6%Si. In the experiment of oxidation, weight gain was decreased as the Si and/or Mo content increased, but increased at 1.5%Mo content.

• 한국진공학회지
• /
• 제6권2호
• /
• pp.143-150
• /
• 1997

본 연구에서는 1000$\AA$두께의 Molybdenum화합물(Mo, Mo-N,$MoSi_2$, Mo-Si-N)의 Cu에 대한 확산방지막으로서의 특성을 면저항측정장비(four-point-probe), XRD, XPS, SEM, RBS 분석을 통하여 조사하였다. 각 박막층은 dc magnetron sputtering장비를 이용하 여 증착되었고 $300^{\circ}C$-$800^{\circ}C$의 온도구간에서 30분동안 진공열처리하였다. Mo 및 $MoSi_2$ 방지 막은 낮은 온도에서 확산방지막으로서의 특성파괴를 보였다. 결정립계를 통한 Cu의 확산과 Mo-실리사이드내의 Si의 Cu와의 반응이 그 원인인 것으로 사료된다. 질소를 첨가한 시편의 경우 확산방지특성 파괴온도는 Mo-N방지막의 경우 $650^{\circ}C$-30분, Mo-Si-N방지막의 경우 $700^{\circ}C$-30분으로 향상되었다. Cu와 Si의 확산은 방지막의 결정립계를 통하여 더욱 빠르게 확 산된다. 따라서 증착시 결정립계를 질소와 같은 물질로 채워 Cu와 Si의 확산을 저지할 수 있을 것으로 사료된다. 본 실험결과에서의 질소첨가는 이와 같은 stuffing 효과외에도 Mo- 실리사이드 박막의 결정화 온도를 다소 높인 것으로 나타났고, 그 결과 결정립계의 밀도를 감소시켜 확산방지막으로서의 특성을 향상시킨 것으로 사료된다. 또한 질소첨가는 실리사이 드내의 금속과 실리콘과의 비를 변화시켜 확산방지막의 특성에 영향을 미친 것으로 보인다. 본 실험에서 조사된 확산방지막 중에서는 Mo-Si-N박막이 Cu와 Si간의 확산을 가장 효과적 으로 저지시킨 것으로 나타났으며 $650^{\circ}C$-30분까지 안정한 특성을 보였다.

• 한국표면공학회지
• /
• 제39권6호
• /
• pp.245-249
• /
• 2006

In this study, ternary Ti-Mo-N and new quaternary Ti-Mo-Si-N coatings were synthesized on steel substrates(AISI D2) and Si wafers by a hybrid coating system of arc ion plating (AIP) using Ti target and d.c. magnetron sputtering technique using Mo and Si targets in $N_2/Ar$ gaseous mixture. Ternary Ti-Mo-N coatings were substitutional solid-solution of (Ti, Mo)N and showed maximum hardness of approximately 30 GPa at the Mo content of ${\sim}10$. %. The Ti-Mo-Si-N coating with the Si content of 8.8 at. % was a composite consisting of fine (Ti, Mo)N crystallites and amorphous $Si_3N_4$ phase. The hardness of the Ti-Mo-Si(8.8 at. %)-N coatings exhibited largely increased hardness value of ${\sim}48$ GPa due to the microstructural evolution to the fine composite microstructure and the refinement of (Ti, Mo)N crystallites. The average friction coefficient of the Ti-Mo-Si-N coatings largely decreased with increase of Si content. The microstructures of Ti-Mo-Si-N coatings were investigated with instrumental analyses of XRD, XPS, and HRTEM in this work.

• 한국해양공학회지
• /
• 제13권4호통권35호
• /
• pp.37-44
• /
• 1999

Hardness characteristics and microstructures of $Nb/MoSi_2$ laminate composites were evaluated from the variation of fabricating conditions such as preparation temperature, applied pressure and pressure holding time. $Nb/MoSi_2$ laminate composites composed of $MoSi_2$ powder and Nb sheets were fabricated by the hot press. From experimental results, it was found that the lamination from Nb sheet and $MoSi_2$ powder was an excellent strategy to improve hardness characteristics of monolithic $MoSi_2$. However, interfacial reaction products like(Nb, Mo)$SiO_2\;and\;Nb2Si_3$ formed at the interface of $Nb/MoSi_2$ and increased with fabricating temperature.

• 한국결정성장학회지
• /
• 제7권4호
• /
• pp.665-672
• /
• 1997

Molybdenum silicides $MoSi_2$ 및 $Mo_5Si_3$를 제조하기 위하여 순금속 Mo과 Si의 혼합분말을 볼밀법으로 실온에서 기계적 합금화시켰다. $MO_{33}Si_{67}$조성의 혼합분말을 100시간 볼밀처리한 결과 금속간화합물 $MoSi_2$가 생성되었으며 $725^{\circ}C$까지 후열처리시킴으로써 단상의 $MoSi_2$로 상변태함을 알 수 있었다. 얻어진 분말의 결정립 크기는 19 nm로 시판 $MoSi_2$분말보다 약 1/4로 매우 미세하였다. 또한 $Mo_{62}Si_{38}$ 조성의 혼합분말도 300시간 볼밀처리를 함으로써 금속간화합물 $Mo_5Si_3$가 생성되었는데 $1000^{\circ}C$까지의 후열처리로 단상 $Mo_5/Si_3$의 미세 결정립 분말을 얻었다. 이와같이 볼밀처리에 의한 기계적 합금화시 $Mo_5Si_3$상이 형성되기 어려운 것은 금속간화합물 $Mo_5Si_3$이 가지고 있는 복잡한 결정구조와 매우 큰 단위격자에 기인하는 것으로 판단하였다. 볼밀법에 의해 제조한 초미세 결정립 분말재료는 기계적 성질을 향상시켜 초고온 구조재료에 응용이 기대된다.