• Journal of Magnetics
• /
• 제5권3호
• /
• pp.99-101
• /
• 2000

Oxygen-plasma effects of single crystal and thin film samples of $La_{0.7}Ca_{0.3}MnO_{3-\delta}$ have been studied. Our resistivity measurements indicate that oxygen plasma treatment gives rise to oxygen diffusion into bulk regions, which results in a decrease of $Mn^{3+}$ concentration in oxygen nonstoichiometric $La_{0.7}Ca_{0.3}MnO_{3-\delta}$ and in the activation energies of Holstein's small polarons in the paramagnetic region.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.932-934
• /
• 2003

For the insulator of inorganic thin film electroluminescent (TFEL), devices AlON combined with TiON was used and it exhibits higher luminance than AlON as well as $Al_{2}O_{3}$ insulator. Furthermore, using AlON with TiON film show better stability and higher luminance than that with $TiO_{2}$ grown by conventional atomic layer deposition (ALD) for the application of the insulator of ZnS:Mn TFEL device.

• 한국결정성장학회지
• /
• 제24권6호
• /
• pp.229-236
• /
• 2014

수평 전기로에서 $MnAl_2S_4$ 다결정을 합성하여 HWE(Hot Wall Epitaxy)방법으로 $MnAl_2S_4$ 단결정 박막을 반절연성 GaAs(100)기판에 성장시켰다. $MnAl_2S_4$ 단결정 박막의 성장 조건은 증발원의 온도 $630^{\circ}C$, 기판의 온도 $410^{\circ}C$였고 성장 속도는 $0.5{\mu}m/hr$였다. 이때 $MnAl_2S_4$ 단결정 박막의 결정성의 조사에서 이중결정 X-선 요동곡선(DCRC)의 반폭치(FWHM)도 132 arcsec로 가장 작아 최적 성장 조건임을 알 수 있었다. $MnAl_2S_4$/SI(Semi-Insulated) GaAs(100) 단결정 박막의 광흡수를 293 K에서 10 K까지 측정하였다. 광흡수 스펙트럼으로부터 band gap $E_g(T)$는 Varshni 공식에 따라 계산한 결과 $E_g(T)=3.7920eV-(5.2729{\times}10^{-4}eV/K)T^2/(T+786K)$였다. $MnAl_2S_4$ 단결정 박막의 응용소자인 photocell로 사용할 수 있는 pc/dc 값이 가장 큰 광전도셀은 S 증기분위기에서 열처리한 셀로 $1.10{\times}10^7$이었으며, 광전도 셀의 감도(sensitivity)도 S 증기분위기에서 열처리한 셀이 0.93로 가장 좋았다. 또한 최대 허용소비전력(MAPD)값도 S 증기분위기에서 열처리한 셀이 316 mW로 가장 좋았으며, S 증기분위기에서 열처리한 셀의 응답시간은 오름시간 14.8 ms, 내림시간 12.1 ms로 가장 빠르게 나타나, $MnAl_2S_4$ 단결정 박막을 S 분위기에서 $290^{\circ}C$로 30분 열처리한 photocell이 상용화가 가능할 것으로 여겨진다.

• 센서학회지
• /
• 제8권1호
• /
• pp.10-15
• /
• 1999

ZnS 형광체와 BST 강유전체 박막을 절연층으로 사용한 백색방출 전계발광소자를 제작하였다. BST 박막의 제조조건으로 target의 조성비가 $Ba_{0.5}Sr_{0.5}TiO_3$이며, 기판온도가 $400^{\circ}C$, 분위기압이 30 mTorr, A:$O_2$의 비가 9:1일때 유전율이 1 kHz의 주파수에서 209를 나타내었다. 형광층으로 ZnS:Mn, ZnS:Tb 및 ZnS:Ag를 사용하였으며, 활성제 각각의 첨가량은 0.8, 0.8 및 1 wt%로 하였다. 형광층 전체의 두께가 500 nm로 하고 하부 절연층을 200 nm, 상부절연층을 400 nm로 증착하였을 때, 박막 전계발광소자의 발광문턱전압은 약 95 V 였고, 최고휘도는 150 V에서 약 $3000\;cd/m^2$이었다. 발광스펙트럼를 관찰한 결과 청색영역(450 nm), 녹색영역(550 nm) 그리고 적색영역(600 nm)의 파장에서 각각의 피이크가 나타나는 것을 관찰하였다.

• 한국자기학회지
• /
• 제25권5호
• /
• pp.144-148
• /
• 2015

스피넬 결정구조를 지니는 $CoMn_2O_4$ 박막을 증착하였으며 이들 박막의 물리적 특성을 후열처리 이전과 이후로 비교 조사하였다. 증착온도인 $720^{\circ}C$보다 낮은 $700^{\circ}C$에서의 후열처리 과정 이후, 열처리 이전의 불분명했던 tetragonal 결정구조가 분명하여졌으며 이는 곧 표면상태의 변화로도 관측되었다. 자성특성의 경우 약 100 K에서 다결정 형태의 벌크에서는 측정할 수 없었던 상전이가 관측되었다. 상전이온도 이상의 온도에서는 전형적인 강자성 특성을 보이는 반면 상전이온도 이하에서는 페리자성 특성을 보였다. 특히 열처리 이후에는 페리자성 특성은 매우 뚜렷하여졌다. 이와 같은 결과는 후열처리과정이 $CoMn_2O_4$ 박막의 물리적 특성을 결정짓는데 필수적임을 의미한다.

• Bulletin of the Korean Chemical Society
• /
• 제28권11호
• /
• pp.1945-1950
• /
• 2007

Two fluorene-based conjugated copolymers containing hexyl-thiophene derivatives, PF-1T and PF-4T, were synthesized via the palladium-catalyzed Suzuki coupling reaction. The number-average molecular weights (Mn) of PF-1T and PF-4T were found to be 19,100 and 13,200, respectively. These polymers were soluble in common organic solvents such as chloroform, chlorobenzene, toluene, etc. The UV-vis absorption maximum peaks of PF-1T and PF-4T in the film state were found to be 410 nm and 431 nm, respectively. Electrochemical characterization revealed that these polymers have low highest occupied molecular orbital (HOMO) levels, indicating good resistance against oxidative doping. Thin film transistor devices were fabricated using the top contact geometry. PF-1T showed much better thin-film transistor performance than PF-4T. A thin film of PF- 1T gave a saturation mobility of 0.001-0.003 cm2 V?1 s?1, an on/off ratio of 1.0 × 105, and a small threshold voltage of ?8.3 V. To support TFT performance, we carried out DSC, AFM, and XRD measurements.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2000년도 International Symposium on Magnetics The 2000 Fall Conference
• /
• pp.268-272
• /
• 2000

Oxygen-plasma effects of single crystal and thin film samples of L $a_{0.7}$C $a_{0.3}$Mn $O_{3-}$$\delta$/ have been studied. Our resistivity measurements indicate that oxygen plasma treatment gives rise to oxygen diffusion into bulk regions, which results in a decrease of M $n^{3+}$ concentration in oxygen nonstoichiometric L $a_{0.7}$C $a_{0.3}$Mn $O_{3-}$$\delta$/ and in the activation energies of Holstein's small polarons in the paramagnetic region.n.egion.n.n.

• 한국전기전자재료학회논문지
• /
• 제37권2호
• /
• pp.164-168
• /
• 2024

(La_0.7Sr_0.3)(Mn_1-xFe_x)O₃ (LSMFO) (x = 0.03, 0.06, 0.09, 0.12) precursor solution are prepared by sol-gel method. LSMFO thin films are fabricated by the spin-coating method on Pt/Ti/SiO₂/Si substrate, and the sintering temperature and time are 800℃ and 1 hr, respectively. The average thickness of the 6-times coated LSMFO films is about 181 to 190 nm and average grain size is about 18 to 20 nm. As the amount of Fe added in the LSMFO thin film increased, the resistivity decreased, and the TCR and B_25/65-value increased. Electrical resistivity, TCR and B_25/65-value of the (La_0.7Sr_0.3)(Mn_0.88Fe_0.12)O₃ thin film are 0.0136 mΩ-cm, 0.358%/℃, and 328 K at room temperature, respectively. The resistivity properties of LSMFO thin films matched well with Mott's VRH model.

• 전자공학회논문지D
• /
• 제35D권2호
• /
• pp.52-59
• /
• 1998

The ZnS:Mn thin film electroluminescent(TFEL) devices fabricated by ALE system were investigated. Yellow-orange light emission was observed when the applied voltage exceeded 134 V and luminance increased sharply as the applied voltage increased. Luminance of 568 Cd/c $m^{2}$ was obtained under 1 KHz sinusoidal voltage wave application at the peak applied voltage of 230 V. The peak wavelength of the emissionwas 577 nm. The C-V, Q-V, $Q_{t}$ - $F_{p}$ , L- $Q_{cond}$, and V- $Q_{pol}$ have been measured under theapplication of the trapezoidal wave with its pulse width varying 0 to 75 .mu.sec. The phoshor and the insulator capacitance of the TFEL device under test were 24.3 nF/c $m^{2}$ and 9 nF/c $m^{2}$, respectively. It was observed that the threshold voltage changed from 137V to 100V as the pulse width varied from 0 to 75 .mu.sec. The L- $Q_{cond}$ characteristics showed that the light emission increased in proportion to the $Q_{cond}$. The luminance increased from 386 Cd/ $m^{2}$ to 607 Cd/ $m^{2}$ when the $Q^{+}$$_{cond}$ increased from 1.3 .mu.C/c $m^{2}$ to 2.3 .mu.C/c $m^{2}$. The V- $Q_{pol}$ characteristics showed that the V was inversely proportional to $Q_{pol}$./. th/ was inversely proportional to $Q_{pol}$./. pol/./.

• Corrosion Science and Technology
• /
• 제11권1호
• /
• pp.1-8
• /
• 2012

The development of martensitic grades which can be processed in continuous galvanizing lines requires the reduction of the oxides formed on the steel during the hot dip process. This reduction mechanism was investigated in detail by means of High Resolution Transmission Electron Microscopy (HR-TEM) of cross-sectional samples. Annealing of a martensitic steel in a 10% $H_2+N_2$ atmosphere with the dew point of $-35^{\circ}C$ resulted in the formation of a thin $_{C-X}MnO.SiO_{2}$ (x>1) oxide film and amorphous $_{a-X}MnO.SiO_{2}$ oxide particles on the surface. During the hot dip galvanizing in Zn-0.13%Al, the thin $_{C-X}MnO.SiO_{2}$ (x>1) oxide film was reduced by the Al. The $_{a-X}MnO.SiO_{2}$ (x<0.9) and $a-SiO_{2}$ oxides however remained embedded in the Zn coating close to the steel/coating interface. No $Fe_{2}Al_{5-X}Zn_{X}$ inhibition layer formation was observed. During hot dip galvanizing in Zn-0.20%Al, the $_{C-X}MnO.SiO_{2}$ (x>1) oxide film was also reduced and the amorphous $_{a-X}MnO.SiO_{2}$ and $a-SiO_{2}$ particles were embedded in the $Fe_{2}Al_{5-X}Zn_{X}$ inhibition layer formed at the steel/coating interface during hot dipping. The results clearly show that Al in the liquid Zn bath can reduce the crystalline $_{C-X}MnO.SiO_{2}$ (x>1) oxides but not the amorphous $_{a-X}MnO.SiO_{2}$ (x<0.9) and $a-SiO_{2}$ oxides. These oxides remain embedded in the Zn layer or in the inhibition layer, making it possible to apply a Zn or Zn-alloy coating on martensitic steel by hot dipping. The hot dipping process was also found to deteriorate the mechanical properties, independently of the Zn bath composition.