• Archives of Pharmacal Research
• /
• v.12 no.3
• /
• pp.214-218
• /
• 1989

Atmospheric particulate matters (A. P. M. ) were collected on quartz-fiber filters from March 1985 to May 1986, using the Andersen high-volume air sampler and contents of six heavy metals (Fe, Mn, Cu, Zn, Pb Ni) in the A. P. M. were determined by atomic absorption spectrophotometry. These heavy metals were divided into the three groups with respect to their particle size distribution. Fe and Mn were mainly associated with coarse particles (diameter > 2.0 $\mu$m), but Pb and Ni were related fine particles (diameter < 2.0 $\mu$m). Cu and Zn had mized size distributions in both of them. In the seasonal variation of heavy metals, the contents of Fe and Mn in spring and Ni and Pb in winter were higher than any other season. There were high mutual correlation between Fe and Mn coarse particles, and between Pb and Ni in fine particles.

• Journal of the Korean Vacuum Society
• /
• v.12 no.S1
• /
• pp.56-59
• /
• 2003

Wurtzite GaN films are grown by low-pressure MOCVD on (0001)-plane sapphire substrates. The GaN films have a total thickness of 4 $\mu$m with a surface Mg-doped p-type layer, which has a thickness of 0.5 $\mu$m. 90k eV $Mn^{+}$ ions are implanted into the GaN films at room temperature with doses ranging from $1 \times10^{15}$ to $1 \times 10^{16}\textrm{cm}^{-2}$. After an annealing step at $770^{\circ}C$ in flowing $N_2$, the structural characteristics of the $Mn^{+}$ implanted GaN films are studied by X-ray diffraction (XRD), Rutherford backscattering spectrometry (RBS) and atomic force microscopy (AFM). The structural and morphological changes brought about by $Mn^{+}$ implantation and annealing are characterized.

• Journal of Magnetics
• /
• v.14 no.2
• /
• pp.93-96
• /
• 2009

The Mn-substituted M-type Ba-ferrite ($BaFe_{12-x}Mn_xO_{19}$; x = 0, 2, 4, 6) powders were prepared by the HTTD (High Temperature Thermal Decomposition) method. The effect of $Mn^{3+}$ Jahn-Teller ions on the magnetic properties has been studied by x-ray diffraction, vibrating sample magnetometry, and $M{\ddot{o}}ssbauer$ spectroscopy. With increasing Mn substitution, the lattice parameter $a_0$ increases while $c_0$ decreases. The magnetocrystalline anisotropy constants ($K_1$) were determined as 2.9, 2.2, 1.8, and, $1.3{\times}10^6\;erg/cm^3$ for x = 0, 2, 4, and 6, respectively, by the LAS method. We have studied the change of cation distribution by $M{\ddot{o}}ssbauer$ spectroscopy which is closely related to $K_1$.

• Journal of the Korean Ceramic Society
• /
• v.37 no.11
• /
• pp.1065-1070
• /
• 2000

TiO$_2$의 첨가가 Mn-Zn ferrites의 전자기적 물성에 미치는 효과에 대해 연구하였다. TiO$_2$의 첨가량이 증가함에 따라 밀도와 전기비저항이 증가된 반면 초기투자율은 감소하였다. TiO$_2$의 첨가에 따라 Fe$^{2+}$ ion의 증가에 기인하여 전력손실의 최소 값을 나타내는 온도가 저온으로 이동하였다. TiO$_2$를 0.12wt% 첨가한 시편의 경우, 100 kHz, 200 mT, 8$0^{\circ}C$ 측정 조건에서는 소결온도가 증가함에 따라 전력손실이 감소하였으며 125$0^{\circ}C$ 소결한 시편이 340 mW/㎤으로 가장 낮은 값을 보였다. 500 kHz, 50 mT, 8$0^{\circ}C$의 측정 조건에서는 소결 온도가 감소함에 따라 전력손실이 감소하였으며 115$0^{\circ}C$ 소결한 시편이 105 mW/㎤으로 가장 낮은 전력손실 값이 관찰되었다.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.10
• /
• pp.929-934
• /
• 1996

The electrochemistry and the reaction of non-μ-oxo dimer-forming [5,10,15,20-tetrakis(2,6-dichlorophenyl)porphyrinato] manganese(Ⅲ) chloride [(Cl8TPP)MnⅢCl] with tetraethylammonium hydroxide in water [-OH(H2O)] have been investigated by electrochemical and spectroscopic methods under anaerobic conditions. The stronger autoreduction of (C18TPP)MnⅢCl by -OH(H2O) in comparison with (Me12TPP)MnⅢCl by -OH(CH3OH) in MeCN is explained as the influence of electronic effects on substituted phenyl groups bonded to meso-position of porphyrin ring and the positive shift of reduction potential (-0.11 V) for (C18TPP)MnⅢCl. The autoreduction of manganese(Ⅲ) porphyrin to manganese (Ⅱ) by this process is only observed when one axial position is occupied by a ligating solvent and OH- coordinates the other axial site. The results are discussed in relation to the mechanisms for the reduction of manganese(Ⅲ) porphyrin.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.12
• /
• pp.1238-1240
• /
• 1997

• Bulletin of the Korean Chemical Society
• /
• v.12 no.3
• /
• pp.349-350
• /
• 1991

• Bulletin of the Korean Chemical Society
• /
• v.12 no.3
• /
• pp.350-352
• /
• 1991

• Journal of the Korean Society for Precision Engineering
• /
• v.5 no.4
• /
• pp.48-58
• /
• 1988

This study was undertaken to observe the formation behavior of ferro- magnetic phase in Mn-Al-Cu Alloys. The alloy selected for this investigation was 70% Mn-29% Al-1% Cu. This pre-allyed pig was prepared to the cylinderical castings using an Induction furnace after homogenizing at $1100^{\circ}C$ for 2hr, the specimens were cooled by cooling methods. Subwequent isothermal heat treatments were followed at $550^{\circ}C$ for various periods of time at predetermined(1-1000min). The formation behavior of ferromagnetic phase was investigated by measurements of magnetic properties of the specimens at each stage of heat treatment, and optical microscopic esamination and X-Ray diffraction analyses were also employed. By this basic experimental results, the conclusions are as follows 1) In order to obtain much amount of ferromagnetic phase, the optimum average cooling rate was about 7.35-$16.4^{\circ}C$/sec($1100^{\circ}C$-$600^{\circ}C$). 2) We verified the decomposition of {\tau} phase to {\beta} -Mn and {\gamma} , as the specimens were homogenized at $1100^{\circ}C$ for 12hr, then heat-treased at $550^{\circ}C$ for 1-1000min. 3) A condition of optimum heat treatments in Mn-Al-Cu permanent mag-netic alloys showed that after homogenizing at $1100^{\circ}C$ for 2hr, the speciments were cooled in air or furnace(A) and subsequent heat treatments at $550^{\circ}C$ for 1-30min. The maximum magnetic properties were measured as follows: Air cooling; Br=1200(Gause), bHc=100(oe), (BH)max=0.07(MGOe) Furnace cooling(A);Br=950(Gauss), bhe=80(Oe), (BH)max=0.05(MGOe)

• Journal of Radiation Protection and Research
• /
• v.12 no.1
• /
• pp.48-53
• /
• 1987

The manganous sulphate bath method is widely used for measurements of neutron source strength. In this study, the analytical chemistry method based on the argon supported inductively coupled plasmas emission spectrometry was used for examining the impurity contents of domestic $MnSO_4{\cdot}H_2O$ the product of Chemical Industry, to induce $^{55}Mn(n,{\gamma})^{56}$ Mn reactions. From the analytical results, mainly potassium, cobalt, and zinc as well as trace amounts of cadmium, lithium, etc. have turned out to be the relevant impurities absorbing the neutrons, and the fraction of neutrons absorbed by the total impurities was calculated. The value obtained was about 1.37% of the neutrons captured by manganese.