• Journal of the Korean GEO-environmental Society
• /
• v.13 no.3
• /
• pp.59-70
• /
• 2012

In this study, to select the best stabilizer for the heavy metals-contaminated soil from a smelter area during phytoremediation, a plant uptake experiment and a soil stabilization were simultaneously applied using Pteris multifida Poir. and five pre-screened stabilizers(zeolite, Mn dioxide, slag, Ca oxide, and magnetite). The extracted heavy metal was measured and compared using a 3 step sequential extraction for the soil samples. The growth rate of the plant was also evaluated. The stabilizers stabilized heavy metals in soil and reduced the extraction rate. Magnetite and calcium oxide showed better results than other stabilizers. The stabilizers enhanced the growth of the plant. All the heavy metals except for arsenic were concentrated in roots while arsenic was concentrated in leaves of the plant. It is concluded that the stabilizers can minimize the heavy metal release from the contaminated soil during phytoremediation and stimulated the growth of plant. These effects of stabilizers could compensate for some weak points of phytoremediation such as reaching of heavy metals by rainwater.

• Journal of Applied Biological Chemistry
• /
• v.65 no.4
• /
• pp.457-462
• /
• 2022

Manganese (Mn) exists in various oxidation states and Mn(II) is the most mobile species of Mn, which is toxic to plants and limits their growth. Therefore, the purpose of this study was to reduce Mn toxicity by immobilizing Mn using various adsorbents including iron oxides and calcium compounds. Ferrihydrite, schwertmannite, goethite were synthesized, which was confirmed by X-ray diffraction. Hematite was purchased and used as Mn adsorbent. Calcium compounds such as CaNO₃, CaSO₄, and CaCO₃ were used to increase pH and oxidize Mn. For Mn adsorption, Mn(II) solution was reacted with four iron oxides, CaNO₃, CaSO₄, and CaCO₃ for 24 hours, filtered, and the remaining Mn concentrations in the solution were analyzed by inductively coupled plasma optical emission spectroscopy. The adsorption rate and adsorption isotherm were calculated. Among iron oxides, the adsorption rate was highest for hematite followed by ferrihyrite, but goethite and schwertmannite did not adsorb Mn. In the case of calcium compounds, the adsorption rate was high in the order of CaCO₃>CaNO₃>CaSO₄. In conclusion, treatment of CaCO₃ was the most effective in reducing Mn toxicity by increasing pH.

• Journal of the Korean Chemical Society
• /
• v.42 no.6
• /
• pp.618-628
• /
• 1998

Pure CaO, Mn-doped CaO, Mn/CaO, and K/CaO catalysts were prepared and tested as catalysts for the oxidative coupling of methane in the temperature range of 600 to 800$^{\circ}C$ to investigate the effects of Mn- and K-addition on the catalytic activity of calcium oxide. To characterize the catalysts, X-ray powder diffraction(XRD), XPS, SEM, DSC, and TG analyses were performed. The catalytic reaction was carried out in a single-pass flow reactor using on-line gas chromatography system. Normalized reaction conditions were generally $p(CH_4)/p(O_2)=250$ Torr/50 Torr, total feed flow rate=30 mL/min, and 1 atm of total pressure with He being used as diluent gas. Among the catalysts tested, 6.3 mol% Mn-doped CaO catalyst showed the best $C_2$ yield of 8.0% with a selectivity of 43.2% at 775$^{\circ}C$. The $C_2$ selectivity increased on lightly doped CaO catalysts, while decreased on heavily doped CaO([Mn] > 6.3 mol%) catalysts. 6 wt.% Mn/CaO and 6 wt.% K/CaO catalysts showed the $C_2$ selectivities of 13.2% and 30.9%, respectively, for the reaction. Electrical conductivities of CaO and Mn-doped CaO were measured in the temperature range of 500 to 1000$^{\circ}C$ at Po2's of $10^{-3}\; to\;10^{-1}\;atm.$ The electrical conductivity was decreased with Mn-doping and increased with increasing $P0_2$in the range of $10^{-3}\;to\;10^{-1}\;atm,$ indicating the specimens to be p-type semiconductors. It was suggested that the interstitial oxygen ions formed near the surface can activate methane and the formation of interstitial oxygen ions was discussed on the basis of solid-state chemistry.

• Resources Recycling
• /
• v.9 no.4
• /
• pp.16-27
• /
• 2000

In order to produce raw material powder of advanced magnetic material by spray roasting process, newly modified spray roasting system was developed in this work. In this spray roasting system, raw material solution was effectively atomized and sprayed into the reaction furnace. Also, uniform temperature distribution inside reaction furnace made thermal decomposition process fully completed, and produced powder was effectively collected in cyclone and bag filter. This system equipped with apparatus which can purify hazard produced gas. In this study complex acid solution was prepared by dissolution of mill scale and ferro-Mn into the acid solution, and the pH of this complex acid solution was controlled about to 4. It was conformed that mill scale and ferro-Mn containing a lot of impurities such as $SiO_2$, P and Al could be used as raw material by reducing the impurities content of complex acid solution below 20 ppm. Complex oxide powder of Fe-Mn system was produced by spraying purified complex acid solution into the spray roaster through nozzle, and the variations of produced powder characters were studied by changing he reaction conditions such as reaction temperature, the injection velocity of solution and air, nozzle tip size and concentration of solution. The morphology of produced powder had spherical shape under the most experimental conditions, and concentration of solution. The morphology of produced powder has spherical shape under the most experimental conditions, and the composition and the particle size distribution were almost uniform, which tells the excellence of this spray roasting system. The grain size of most produced powder was below 100 nm. From the above results, it will be possible to produce ultra fine oxide powder from the chloride of Fe, Mn, Ni, Cu and rare earth by using this spray roasting system, and also to produce ultra fine pure metal powder by changing reaction atmosphere.

• Korean Journal of Materials Research
• /
• v.11 no.11
• /
• pp.936-940
• /
• 2001

Spray pyrolysis is a favorable technique to form complex mixed-metal oxide powders with high purity in high temperature region. Manganese oxide powders were prepared by spray pyrolysis from an aqueous solution of $Mn(NO_3)_2$. Powders were formed in the temperature range of 500~$700^{\circ}C$ under the constant pressure of 300torr. All the powders have hydrous forms. When the temperature was increased, the size and the surface area of the particles decreased. An electrochemical capacitors were made with manganese oxide electrodes and KOH electrolyte. With the temperature decreased, capacitors showed high capacitance. Capacitor which was prepared with powders formed in the temperature $500^{\circ}C$ demonstrated specific capacitances as high as 83F/g.

• Transactions of Materials Processing
• /
• v.32 no.3
• /
• pp.160-165
• /
• 2023

As the supply of eco-friendly vehicles increases, the application rate of hot stamping components is rising to reduce vehicle weight and improve safety. Although Al-Si coated steel sheets are commonly used in hot stamping processes, their manufacturing costs are elevated due to process patents and royalties. Various hot stamping studies have been conducted to reduce these production costs. In this study, we derived a process control method for suppressing the oxide layer of hot stamping parts using uncoated boron steel sheets. Firstly, hat-shaped parts were hot stamped under atmospheric conditions to analyze the tendency of oxide layer formation by location. Then, the Gleeble system was used to observe oxide layer formation based on oxygen content under various atmospheric conditions. Finally, the oxide layer thickness was quantitatively measured using SEM images.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2007.05a
• /
• pp.78.1-78.1
• /
• 2007

• Proceedings of the Korean Vacuum Society Conference
• /
• 2008.02a
• /
• pp.275-275
• /
• 2008

• Proceedings of the Korean Magnestics Society Conference
• /
• 2005.12a
• /
• pp.32-32
• /
• 2005

• Proceedings of the Korean Magnestics Society Conference
• /
• 2008.12a
• /
• pp.295.2-295.2
• /
• 2008