• 농업과학연구
• /
• 제48권2호
• /
• pp.201-207
• /
• 2021

This study evaluated the influence of enzyme mixture supplementation on the growth performance, nutrient digestibility, and fecal score of growing pigs. A total of 72 pigs with an initial body weight of 20.23 ± 1.46 kg were randomly assigned to two treatments consisting of a basal diet and the basal diet supplemented with 0.5% enzyme mixture. During a 19-day trial, no significant difference was observed in the body weight (BW) and average daily feed intake (ADFI) of the pigs. However, a gradual increase in the average daily gain (ADG) was observed during the period from day 14 to day 19 and the overall period in pigs fed a diet supplemented with the 0.5% enzyme mixture (p < 0.10) as compared to the pigs that were fed the control diet. From days 4 to 14 and in the overall experiment, a gradual increase in the feed conversion ratio (FCR) (p < 0.10) was observed with the inclusion of 0.5% enzyme mixture supplementation. The nutrient digestibility of dry matter (DM), nitrogen (N), and energy were not affected by enzyme mixture supplementation. In addition, dietary supplementation with the enzyme mixture had no significant effects on the fecal score of growing pigs. In summary, supplementation with the enzyme mixture had beneficial effects on the ADG performance but failed to have a significant effect on growth performance (BW), nutrient digestibility, and fecal score.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(1)
• /
• pp.195-198
• /
• 2002

One-dimensional radar signature, such as range profile, is highly dependent on the aspect angle. Therefore, radar target recognition over wide angular region is a very difficult task. In this paper, we propose the Bayes classifier with Gaussian mixture model for radar target recognition over wide-angular region and compare performances of proposed technique and radar target recognition with subclasses concept in the literature of probability of correct classification ratio.

• 한국도로학회논문집
• /
• 제3권1호
• /
• pp.185-197
• /
• 2001

본 연구는 온도에 따라 특성이 변하는 아스팔트 콘크리트의 파괴인성을 규명하기 위하여 기존의 유효균열 모델을 수정하는 연구를 다루고 있다. 본래의 ECM모델은 콘크리트와 같은 고체에 적용되도록 개발되어 재료의 포아슨 비를 고려하지 않는다. 하지만 아스팔트 콘크리트는 온도변화에 민감하여 온도에 따라 포아슨 비가 변화하므로 다양한 온도하에서 정확한 파괴 특성을 알기 위해서는 포아슨 비가 고려되어져야 한다. 3개의 개질아스팔트 결합재를 포함한 4가지 결합재를 사용하여 밀입도 아스팔트 혼합물을 제조하여 초기균열 보에 대한 3점 휨 시험을 $-5^{\circ}C$부터 $-35^{\circ}C$까지에서 수행하였다. 탄성계수, 휨강도 및 파괴인성을 시험을 통하여 구하였다. 시험결과 포아슨비가 고려되는 수정 ECM 공식을 사용하므로서 보다 정확한 값들을 얻을 수 있었다. 폴리머 개질 아스팔트 혼합물이 일반아스팔트 혼합물에 비하여 더 낮은 저온하에서 더 높은 강성과 파괴인성을 유지함을 알 수 있었다.

• 폴리머
• /
• 제30권4호
• /
• pp.332-337
• /
• 2006

무유화제중합으로 제조된 폴리 (메틸 메타크릴레이트)(PMMA) 시드 고분자 미립자에 가교단량체인 ethylene glycol dimethacrylate(EGDMA), 1,6-hexanedioldiacrylate(HDDA) 또는 그 혼합액을 흡수시키고, 이를 중합하여 단분산 가교고분자 미립자를 제조할 시 1) 흡수된 가교단량체와 시드 고분자 미립자의 중량비 (흡수율) 변화, 2) 가교단량체 혼합액에서의 EGDMA의 함량비 변화 및 3) 중합개시제의 사용량 변화 등에 따라 제조된 단분산 가교고분자 미립자 및 그의 무전해 니켈도금체의 기계적 물성인 탄성복원율, 압축탄성률, 파괴강도 및 파괴변형률의 변화를 micro compression test(MCT)를 사용하여 측정하였다. 이번 연구를 통해 흡수율의 증가는 파괴강도에만 큰 영향을 미쳤으나, EGDMA의 증가, 중합개시제의 증량 및 무전해 니켈도금 실시 등은 압축탄성률 및 파괴 강도에 동시에 큰 영향을 미침을 알 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1667-1670
• /
• 1999

In this paper, We are studied the electrical properties of thin film mixed with LLDPE and EVA, and the specimen is selected as Low Linear Density Polyethylene and Ethylene Vinyl Acetate produced by mixture ratio of 50:50, 60:40, 70:30 and 80:20. (thickness $100[{\mu}m],\;70[{\mu}m],\;50[{\mu}m],\;30[{\mu}m]$). As the electrical properties. one is electrical conduction characteristics of the due to mixture ratio of linear low density polyethylene (LLDPE) and ethylene vinyl acetate(EVA), the other is AC breakdown of specimens due to variation of the thickness. From the result of XRD, it is confirmed that specimen of 80 : 20 and virgin LLDPE have high peaks at $2\theta=21.4[^{\circ}]$ and the peak by the contribution of amorphous at $2{\theta}=19.5[^{\circ}]$ is constant with no relation to mixture ratio, but virgin EVA is somewhat lower.

• 한국자동차공학회논문집
• /
• 제12권2호
• /
• pp.1-8
• /
• 2004

A cylindrical constant volume combustion chamber was used to investigate the exhaust emission characteristics of homogeneous charge, stratified pattern and inhomogeneous charge under various conditions using gas chromatography. In the case of homogeneous charge condition, the $CO_2$ concentration is proportional to excess air ratio and overall charge pressure, the $CO_2$ concentration is proportional to excess air ratio and the UHC concentration is inversely proportional to ignition time and overall charge pressure. In the case of stratified pattern, the RI(rich injection) condition shows better exhaust emission characteristics, especially $CO_2$, than that of HI (homogeneous injection) or LI (lean injection) conditions. In inhomogeneous charge conditions, when initial charge pressure is increased, $CO_2$ and UHC concentration is reduced but $O_2$ concentration is increased. And when the excess air ratio of initial charge mixture is 3.0, UHC and $CO_2$concentration show lowest values.

• 한국환경과학회지
• /
• 제12권12호
• /
• pp.1321-1327
• /
• 2003

Two different kinds of cases, with and without addition of noncrystalline silica to the Hadong kaolin were studied to obtain useful information on the synthesis of zeolite. The research was carried out to investigate the formation area and the crystalized degree of zeolite according to a synthetic time, the water content of raw material mixture, KOH concentration, and stirring intensity. In the case of without addition of noncrystalline silica to the Hadong kaolin and the low concentration range of KOH, the structure of the kaolin was not changed. However, when the mole ratio of K2O/SiO$_2$ in natural kaolin was increased, Linde-L zeolite and unknown structure of kaolins, U-1 and U-2 were produced. While in the high concentration range of KOH, the unknown structure of kaolins, U-6 and U-2, were produced and the production rate of U-6 was increased with the increased of K2O/SiO$_2$ mole ratio. In the case of with addition of noncrystalline silica to the Hadong kaolin and treatment with KOH hydrothermal processing, ZSM-5, ZSM-35, and Linde-L zeolites and the mixture of unknown structure of zeolites, U-1, U-2, U-3, and U-4, were obtained. Both cases demonstrated that the synthesis of zeolite from the Hadong kaolin was highly influenced by KOH concentration of raw material mixture.

• 한국식품조리과학회지
• /
• 제23권4호통권100호
• /
• pp.551-560
• /
• 2007

This study was performed to determine the optimum ratio of ingredients in the Sulgidduk with barley(Hordeum vulgare L.) sprout powder. A mathematical analytical tool was employed for optimization of the typical ingredients. The canonical form and trace plot showed the affect of each ingredient in the mixture against the final product. Mixture design showed 14 experimental points, including 4 replicates for three independent variables. The three independent variables selected for the experiment were: water($15{\sim}22%$), barley sprout powder($1{\sim}4%$), and sugar($12{\sim}19%$). The optimum responses variables such as color values(L, a, and b), instrumental texture parameters(hardness, gumminess, and chewiness), and sensory characteristics(appearance, color, smell, taste, softness, moistness, and overall acceptability) were evaluated. The Hunter colorimetric L- and a-values of the Sulgidduk decreased with an increasing amount of barley sprout powder. As more barley sprout powder was added, a higher b-value resulted. Textural hardness, gumminess, and chewiness were lowered by the addition of barley sprout powder. The optimum formulation obtained by both numerical and graphical methods showed similar results. The representative optimal ingredient ratio commonly obtained by both methods were: 18.2% water, 2.0% barley sprout powder, and 14.8% sugar.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제27회 추계학술대회논문집
• /
• pp.203-206
• /
• 2006

액체 추진로켓의 총역적을 극대화를 위한 추진제 잔류량 최소화를 목적으로 하는 추진제 소진 시스템에 대한 분석을 수행하였다. 추진제 잔류량 변화의 주요 인자는 비행중 추진제 혼합비와 추진제의 실제 탑재량이다. 특히 극저온 추진제를 이용할 경우에는 온도 변화에 따른 밀도 변화가 잔류량 변화에 큰 영향을 준다. 비행 중 산화제 및 연료의 수위를 측정하여 필요 시 엔진으로 공급되는 유량을 조절함으로서 산화제 및 연료가 동시에 소진되도록 하는 시스템을 이용하여 잔류량을 최소할 수 있다. 이러한 시스템을 도입하기 위해서는 액체 로켓엔진의 혼합비 제어 시스템이 동반되어야 한다.

• 품질경영학회지
• /
• 제42권4호
• /
• pp.579-590
• /
• 2014

Purpose: Ball milling is a popular process for obtaining fine powders in the part and material industry. One of important issues in the ball milling is to produce particles with a uniform size. Although many factors affect uniformity of particles, this paper focuses on the choice of ball diameter. Consider a ball milling where balls can be taken with three different diameters. The purpose of this paper is to find a ball mix which minimizes the average particle size. Methods: Ball diameters are selected as 10mm, 3mm, and 0.5mm. In order to find an optimum mixing ratio, the method of mixture experiments is employed in this paper. Taguchi's signal-to-noise ratio (SNR) for smaller-the-better type is also used to analyze experimental data. Results: According to the experimental result, SNR is maximized when the ball mix is taken as either 7:3:0 or 6:4:0. Such mixing ratios can be technically validated in terms of porosity reduction. Conclusion: The ball mixing technique presented in this paper provides a useful way to improve the production efficiency with a low cost.