• 제목/요약/키워드: Mixture Preparation

검색결과 653건 처리시간 0.035초

천연 기능성 소재 혼합물이 Streptozotocin 유발 제1형 당뇨 쥐의 혈당 강하 효과(I) (Effect of Natural Functional Mixture on the Descent of BloodGlucose Level in Streptozotocin-Induced Diabetic(type I) Rats(I))

  • 이수진
    • 한국조리학회지
    • /
    • 제13권3호
    • /
    • pp.199-206
    • /
    • 2007
  • Hypoglycemic efficacy of natural functional mixture(FM) and level of the diabete related hormones in streptozotocin(STZ)-induced diabetic rats were investigated. Male Sprague-Dawley rats were divided into three groups (normal, diabetic fed diets with/without FM). Supplement of FM did not affect the body weight and feed intake of STZ-induced diabetic rats. The increase in the weight of liver of STZ-induced diabetic rats was weakened by supplement of FM, whereas the weight of kidney and heart was not affected. Blood glucose level was slightly, and glucose tolerance of post-feeding was significantly improved by functional mixture. The mixture significantly reduced the elevated HbA1C level of diabetic rats by 15%, and it increased the level of insulin and C-peptide in blood and decreased glucagon level. Therefore, we conclude that FM in this study has a potency of prevention and treatment of diabetes mellitus.

  • PDF

Intake Valve Temperature Effect on the Mixture Preparation in a SI Engine During Warm-up

  • 신영기
    • 한국자동차공학회논문집
    • /
    • 제5권5호
    • /
    • pp.51-66
    • /
    • 1997
  • A heat transfer model of the intake valve in a spark ignition engine is presented, which is calibrated with a number of the valve temperature profiles measured during engine warm-up for the gaseous fuel(propane). The valve is divided into four identical elements for which the assumption of lumped thermal mass is applied. The calibration is made so that the difference between the measued and simulated valve temperatures becomes minimal. Then the model is applied to the cases of the liquid fuel(indolene) to estimate the amount of the liquid fuel vaporized from the intake valve by assuming that fuel evaporation accounts for the deficit of the heat balance budget. The results of the model show quantitative contribution of each heat transfer source to the heat balance. The behavior of the calculated mass fraction of the fuel vaporized from the intake valve explains how the liquid fuel evaporate during engine warm-up. The mass fraction at warmed-up condition is closely related with the fraction directly targeted on the valve back by the fuel spray geometry.

  • PDF

초임계 이산화탄소를 이용하는 친환경 공정에 의한 다공성 고분자의 제조 (Preparation of porous polymers by environmentally friend process in supercritical carbon dioxide)

  • 강세란;홍성수;이민규;이석희;천재기;주창식
    • 한국환경과학회지
    • /
    • 제13권3호
    • /
    • pp.319-325
    • /
    • 2004
  • An experimental study on the preparation of monolithic porous polymers by environmentally friend process in supercritical carbon dioxide has been carried out. Polymerization mixture composed of a cross-linking monomer, initiator and functional co-polymer was charged in the reactor with sapphire window. After the system was purged with a flow of $CO_2$ for 15 min, the reactor was pressurized with liquid $CO_2$ up to 100 bars. The reactor was isolated from and placed back to the system via quick connector for shaking until the mixture had become fully homogeneous. The reactor was then heated and pressurized to the required reaction conditions and left overnight. After cooling and $CO_2$ evacuation, the polymer was removed from the reactor as dry, white, continuous monoliths. The effect of experimental conditions on the physical properties of porous polymer was systematically examined, and it was found that monomer content had a major effect on the physical properties of the polymers.

연속공정에 의한 UF용 폴리이미드 분리막의 제조

  • 김완주;전종영;탁태문
    • 한국막학회:학술대회논문집
    • /
    • 한국막학회 1995년도 춘계 총회 및 학술발표회
    • /
    • pp.45-45
    • /
    • 1995
  • Filtration, one of the most important process in the various industrials, is defined as the separation of two or more compounds from a fluid by passing the mixture refers to the separation of solid, immisible particles from liquid or gaseous mixture. Membrane filtration which is a type of filtration extends it's application further to include the separation, concentration, and filtration. The main objective of this investigation is the preparation of organic solvents-resistant polyimide membranes by using phase inversion technique and their application as a UF membrane. Specially, the dope solution was prepared from the newly developed method. The newly developed method is that the dope solution was directly prepared from the polyimide solution which was prepared by the modified one-step polymerization. The effects of the parameters for membrane preparation such as the casting solution composition and the casting conditions were investigated and the performance and chemical stabfiity of membrane are going to be tested.

  • PDF

직접 분사식 가솔린 엔진의 실린더 내 분무 유동 특성에 관한 연구 (In-cylinder Spray Flow Characteristics in Direct-injection Gasoline Engine)

  • 김진수;전문수;윤정의
    • 한국자동차공학회논문집
    • /
    • 제8권6호
    • /
    • pp.51-59
    • /
    • 2000
  • In-cylinder spray flow motion plays an important in the adjustment of mixture preparation with a fundamental spray characteristics and in-cylinder flow field well in direct-injection gasoline engine. In this study, the fundamental spray characteristics such as mean drop size, velocity distribution, spray angle were measured and in-cylinder spray flow motion was visualized in order to optimize intake port, piston top land and combustion chamber shapes in the development stage of mass-produced G야 engine. For these experiments, the PDPA measurements and Mie scattering technique were used for detailed spray characteristics and in-cylinder spray motions were obtained by use of ICCD camera through the single-cylinder optical engine. From the experimental results, the test injector shows a good low-end linearity between the dynamic flow and fuel injection pulse width and the fuel spray of 20mm or less in SMD with good spray symmetry. In addition, the in-cylinder tumble flow has more effect on the homogeneous mixture formation than that of in-cylinder swirl flow at early injection mode and the in-cylinder swirl flow plays a better role of stratified mixture preparation than tumble flow at late injection mode.

  • PDF

자전연소합성법에 의한 SiC 분말 제조시 반응변수의 영향 (The Investigation of Reaction Parameters on the Reactivity in the Preparation of SiC by SHS)

  • 신창윤;원형일;;원창환
    • 한국세라믹학회지
    • /
    • 제43권7호
    • /
    • pp.427-432
    • /
    • 2006
  • The preparation of SiC powder by SHS in the system of $SiO_2-Mg-C$ was investigated in this study. The effects of various processing parameters such as the initial pressure of inert gas in reactor, the content of Mg and C in mixture and the size of $SiO_2$ particles on the synthesis of SiC by SHS methode were investigated. The minimum initial pressure of inert gas in reactor for SHS reaction in this system was 5 atm, and as the pressure increased, and the concentration of unreacted Mg decreased. At 50 atm of the initial inert gas pressure in reactor, the optimum composition for the preparation of pure SiC was $SiO_2+2.5Mg+1.2C$. SiC powder synthesized in this condition had a mixture of ${\alpha}-SiC\;and\;{\beta}-SiC$ with an irregular shape and the particle size of $0.5{\sim}0.8{\mu}m$.

Influence of Sample Preparation Method and Silver Salt Types on MALDI-TOFMS Analysis of Polybutadiene

  • Choi, Sung-Seen;Ha, Sung-Ho
    • Macromolecular Research
    • /
    • 제16권2호
    • /
    • pp.108-112
    • /
    • 2008
  • Matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) analysis of nonpolar polymeric materials is affected by the sample preparation as well as the matrix and cationizing agent. This study examined the influence of silver salt types on the MALDI analysis of polybutadiene (PB). Silver trifluoroacetate (AgTFA), silver benzoate (AgBz), silver nitrate ($AgNO_3$), and silver p-toluenesulfonate (AgTS) were used as the silver salts to compare the MALDI mass spectra of PB. The mixture solution of PB and 2,5-dihydroxybenzoic acid (DHB), as a matrix dissolved in THF, was spotted on the sample plate and dried. A droplet of the aqueous silver salt solution was placed onto the mixture. The mass spectrum with AgBz showed the clear $[M+Ag]^+$ ion distribution of PB while the mass spectrum with AgTFA did not show $[M+Ag]^+$ ions but only silver cluster ions. The mass spectra with $AgNO_3$ and AgTS did not show a clear $[M+Ag]^+$ ion distribution. The difference in the formation of $[M+Ag]^+$ ions of PB depending on the silver salts was attributed to the silver cation transfer reaction between the silver salt and the matrix (DHB). The mass spectrum showed a clear $[M+Ag]^+$ ion distribution of PB when the conjugate acid of the silver salt was less acidic than the matrix.

Streptozotocin 유발 제1형 당뇨 쥐의 혈당강하에 대한 천연 기능성 소재 혼합물의 효과(II) (Effect of Natural Functional Mixture on the Descent of Blood Glucose Level in Streptozotocin-Induced Diabetic(type I) Rats(II))

  • 손동화;김대곤;이수진
    • 한국조리학회지
    • /
    • 제17권1호
    • /
    • pp.238-247
    • /
    • 2011
  • 본 실험은 streptozotocin(STZ)으로 당뇨병이 유도된 쥐의 혈장 요소질소량, 지질수준 및 간 지질수준, 간 효소 활성에 천연 기능성 소재 화합물이 미치는 영향을 평가하는 것이 목적이었다. 총 콜레스테롤은 기능성 소재를 보충 급여한 실험군에서 유의적으로 낮은 수치(70.69 mg/dL)를 보였으며, 이로 인해 총 콜레스테롤에 대한 HDL 콜레스테롤의 비율이 증가(42.6에서 51.5%로) 하였다. 그러나, SOD, CAT, GSH-Px, GSH 및 LPO 활성에는 변화가 없었으며, 이는 기능성 소재의 보충 급여가 당뇨 쥐의 산화적 스트레스에는 큰 영향을 주지 않음을 의미한다. 보충 급여가 당뇨 쥐의 AST 수치 감소시켰으며, 이는 천연 기능성 소재 화합물 섭취가 간 기능 손상을 입은 STZ 유발 당뇨 쥐에 회복작용을 함을 알 수 있었다.

  • PDF