• Journal of Mushroom
• /
• v.8 no.3
• /
• pp.91-95
• /
• 2010

The acute toxicity of a crude extract of maitake mushroom(Grifola frondosa practical compound: GFPC) and the mixture of maitake mushroom extract and white jelly mushroom extract(Tremella fuciformis practical compound: TFPC). For acute oral toxicity test, male and female ICR mice were randomly assigned to five groups, consisting of 12 animals each, six males and six females, received either GFPC or the mixture of GFPC and TFPC, at dose of 0, 2,000 and 5,000mg/kg b.w. by orally(10ml/kg b.w.). For the period of 48hr, clinical signs, body weight and food intake were measured. All animals survived during the study and did not show any clinical signs. Food intake was mildly decreased in both GFPC and the mixture of GFPC and TFPC treated groups, however, body weight gain showed no significant difference among the groups. It is suggested that LD50 of GFPC and the mixture of GFPC and TFPC by oral administration was estimated to be over 5,000mg/kg in both sexes of mice. These results conform that GFPC and the mixture of GFPC and TFPC are safe and no toxic at average dietary level.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.59-64
• /
• 2003

As the economy of a country develops, the necessity for social overhead capital such as railroad, highway and other transportation infrastructures becomes an utmost issue as the volume of traffic increases. As the standard of living has been raised the needs for ecological road pavement also increase. As a matter of fact, the concrete and asphalt pavement have been constructed without considering the harmony with nature. The Road Compound pavement is constructed with local soils from optimum mixture proportions that did not contaminate the surroundings and represent the ecological pavement.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.6
• /
• pp.246-252
• /
• 2011

The semiconducting $MnSi_{1.73}$ compound has been recognized as a thermoelectric material with excellent oxidation resistance and stable characteristics at elevated temperature. In the present work, we applied mechanical alloying (MA) technique to produce $MnSi_{1.73}$ compound using a mixture of elemental manganese and silicon powders. The mechanical alloying was carried out using a Fritsch P-5 planetary mill under Ar gas atmosphere. The MA powders were characterized by the X-ray diffraction with Cu-$K{\alpha}$ radiation, thermal analysis and scanning electron microscopy. Due to the observed larger loss of Si relative to Mn during mechanical alloying of $MnSi_{1.73}$, the starting composition of a mixture Mn-Si was modified to $MnSi_{1.83}$ and then $MnSi_{1.88}$. The single $MnSi_{1.73}$ phase has been obtained by mechanical alloying of $MnSi_{1.88}$ mixture powders for 200 hours. It is also found that the grain size of $MnSi_{1.73}$ compound powders analyzed by Hall plot method is reduced to 40 nm after 200 hours of milling.

• Journal of Information Display
• /
• v.7 no.3
• /
• pp.13-18
• /
• 2006

Currently, the flexible organic light emitting devices (OLEDs) are investigated. They are very vulnerable to moisture, and thus have been found to show some problems. Thus, an effective barrier layer is needed to protect from moisture in air. We deposited thin films with magnesium oxide (MgO) and silicon oxide $(SiO_{2})$ compounds mixed at various mixture ratios on flexible polyether sulfone (PES) substrates by an electron-beam evaporator to investigate their applizability for transparent barrier applications. In this study, we found that as the MgO fraction increased, thin films comprised of MgO and $(SiO_{2})$ compounds became more amorphous and their surface morphologies become smoother and denser. In addition, zirconium oxide $(ZrO_{2})$ was added to the above-mentioned compound mixtures. $ZrO_{2}$ made thin mixture films more amorphous and made the surface morphology denser and more uniform. The water vapor transmission rates (WVTRs) of the whole films decreased rapidly. The best WVTR was obtained by depositing thin films of Mg-Si-Zr-O compound among the whole thin films. As the thin mixture films became more amorphous, and the surface morphology become denser and more uniform, the WVTRs decreased. Therefore, the thin mixture films became more suitable for flexible OLED applications as transparent passivation layers against moisture in air.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.5
• /
• pp.397-404
• /
• 2009

Effects of ceramic filler types and dose on the low temperature sintering and dielectric properties of ceramic/$CaO-Al_2O_3-SiO_2$ (CAS) glass composites were investigated. All of the specimens were sintered at $850{\sim}900^{\circ}C$ for 2 h, which conditions are required by the low-temperature co-firing ceramic (LTCC) technology. Ceramic fillers of $CaCO_3$, $Al_2O_3$, $CaCO_3-Al_2O_3$ mixture, and $CaCO_3-Al_2O_3$ compound ($CaAl_2O_4$), respectively, were used. The addition of $Al_2O_3$ yielded the crystalline phase of alumina, which was associated with the inhibition of sintering, while, $CaCO_3$ resulted in no apparent crystalline phase but the swelling was significant. The additions of $CaCO_3-Al_2O_3$ mixture and $CaAl_2O_4$, respectively, yielded the crystalline phases of alumina and anorthite, and the sintering properties of both composites increased with the increase of filler addition and the sintering temperature. In addition, the $CaAl_2O_4$/CAS glass composite, sintered at $900^{\circ}C$, demonstrated good microwave dielectric properties. In overall, all the investigated fillers of 10 wt% addition, except $CaCO_3$, yielded reasonable sintering (relative density, over 93 %) and low dielectric constant (less than 5.5), demonstrating the feasibility of the investigated composites for the application of the LTCC substrate materials.

• Journal of the Korean Society for Heat Treatment
• /
• v.5 no.4
• /
• pp.215-223
• /
• 1992

This study has been performed to investigate into some effects of temperature, gas mixing ratio and time on the optical microstructure, hardness and wear characteristics of medium carbon alloy steel treated by plasma nitriding. The results obtained from the experiment are summarized as follows: (1) Optical micrographs of AISI 4140 steel plasma-nitrided by the double stage technique have revealed that the nitrided layer is composed of the compound layer and the diffusion layer. The variation in temperature at the first stage gives effects, on the formation of compound layer and the growth rate is shown to be relatively fast at $460^{\circ}C$. (2) The thickness of compound layer has been found to increase with increasing nitrogen percentage in the gas mixture and the holding time. It is therefore recommended that a shorter holding time and a lower nitrogen percentage are more effective to produce a tougher compound layer and a diffusion layer only. (3) X-ray diffraction analysis for AISI 4140 steel has shown that the compound layer consist of ${\gamma}^{\prime}-Fe_4N$ and ${\alpha}-Fe$ and that tough compound layer diffustion layer only can be obtained by the double stage plasmanitriding process. (4) There is also a tendency that the total hardened layer depth increases with increasing temperature, time and nitrogen percentage in the first stage during the double stage plasma nitriding. (5) The wear resistance of plasma nitrided specimens has been found thobe considerably increased compared to the untreated specimens and the amount of increment has appeared to increase further with increasing nitriding temperature, holding time and notrogen percentage of gas mixture in the first stage treatment.

• Journal of the Korean Society for Heat Treatment
• /
• v.13 no.3
• /
• pp.143-150
• /
• 2000

Ferritic plasma nitrocarburising was performed on pure iron using a modified DC plasma unit. This investigation was carried out with various gas compositions which consisted of nitrogen, hydrogen and carbon monoxide gases, and various gas pressures for 3 hours at $570^{\circ}C$. After treatment, the different cooling rates(slow cooling and fast cooling) were used to investigate its effect on the structure of the compound layer. The ${\varepsilon}$ phase occupied the outer part of the compound layer and ${\gamma}^{\prime}$ phase existed between the ${\varepsilon}$ phase and the diffusion zone. The gas composition of the atmosphere influenced the constitution of the compound layer produced, i.e. high nitrogen contents were essential for the production of ${\varepsilon}$ phase compound layer. It was found that with increasing carbon content in the gas mixture the compound layer thickness increased up to 10%. In the gas pressure around 3 mbar, the compound layer characteristics were slightly effected by gas pressure. However, in the low gas pressure and high gas pressure, the compound layer characteristics were significantly changed. The constitution of the compound layer was altered by varying the cooling rate. A large amount of ${\gamma}^{\prime}$ phase was transformed from the ${\varepsilon}$ phase during slow cooling.

• Journal of Digital Convergence
• /
• v.15 no.11
• /
• pp.285-295
• /
• 2017

This study aims to provide basic data on useful functional ingredients in red ginseng by studying the anti-inflammatory and anti-cancer effects of convergence of ginsenoside Rh2(Rh2) and compound K(CK) isolated from amplified red ginseng. Therefore we examined cytotoxicity in Hep3B, activity of IL-6 induced STAT3 luciferase and survival concentration of cells in B16F10 and HaCa T. According to the experimental results, when the Rh2 and CK mixture were 10 ug/ml, there was no cytotoxicity in Hep3B cells and the anti-inflammatory effect of IL-6 reduction ratio was 102%. In addition, Rh2 and CK mixture were observed to be toxic in melanoma cell line B16F10 and HaCa T (human keratinocyte) at 50 uM. FACS(fluorescence activated cell sorting) analysis showed that annexin V was not expressed and melanoma cells and keratinocyte were desorbed and killed. It can be assumed that the mechanism of killing through this phenomenon is due to the cell death of anoikis-type, and it is necessary to study the changes of cell adhesion proteins in the future in order to clarify the cell death signal system.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.20 no.1
• /
• pp.103-114
• /
• 2006

Herbal mixture water extract of (Chrysanthemum morifolium, Portulaca oleracea, Sanguisorba officinalis, Sophora flavescens, Phellodendron amurense, Cnidium monnieri) which exhibit several beneficial effects including acne and skin diseases, was tested for anti-microbial activity and anti-inflammation effects. The herbal mixture extract showed antimicrobial activity against Stapylococcus epidermis, and Propionibacterium acne. The growth of Stapylococcus epidermis, and Propionibacterium acne was inhibited completely by addition of 1.0% of the extract. Also in the present study we examined the mixture extract on compound 48/80 induced allergy and LPS induced cyclooxygenase-2(COX-2) gene expression in RAW 264.7 macrophage. The results indicated the ear swelling and histamine release induced by compound 48/80 were dose-dependently reduced, ranging 28-60%, and 48-72% , respectively. Furthermore the extract inhibited the expression of LPS-induced COX-2 proteins and mRNAs without an appreciable cytotoxic effects on RAW 264.7 cells. The LPS-induced cytokine gene expression including IL-$1{\beta}$, TNF-$\alpha$, and IL-6 were dose-dependently suppressed by the mixture extract. Based on these results, it is concluded that the herbal mixture water extract can be applied to the acne and skin diseases therapy.

• Mass Spectrometry Letters
• /
• v.14 no.3
• /
• pp.110-115
• /
• 2023

The reaction of (COD)PdCl₂ with new C₃-symmetric tridentate L (COD = 1,5-cyclooctadien; L = 1,3,5-tris(picolinoyloxyethyl)cyanurate) in a mixture of acetone and dichloromethane produces single crystals consisting of unprecedented monometallacyclic [PdCl₂(L)]. This cyclic compound arises from trans-chelation of two of three donating pyridyl groups of L, while the third pyridyl group remains uncoordinated. Electrospray ionization mass spectrometry (ESI-MS) data on L exhibited the major peak corresponding to [C₂₇H₂₄N₆O₉ + H⁺]⁺. Fast atom bombardment mass spectrometry (FABMS) data on [PdCl₂(L)], however, showed the mass peak corresponding to the L instead of the present palladium(II) compound species, due to the insolubility and dissociation in solution. The physicochemical properties of the present palladium(II) compound were fully characterized by means of infrared (IR) and nuclear magnetic resonance (NMR) spectroscopy, thermal analysis, single-crystal X-ray diffraction (SC-XRD) measurement.