• 대한기계학회논문집
• /
• 제8권3호
• /
• pp.210-216
• /
• 1984

본 연구에서는 이러한 화염의 구조를 자세히 파악하기 위하여, 화염의 온도분 포 및 가스농도분포 등을 비교적 정밀하게 측정하고 Shadow graph 등을 통하여, 선회 화염의 거시적인 구조적 특성을 알아보고 일산화질소, 탄화수소 및 일산화탄소 등의 생성특성을 규명함으로서 실제 버어너에서의 기하학적 변형에 따른 화염구조의 예측과 수치해석을 위한 기본 데이타를 얻고, 공해물질발생과 화염구조와의 상관관계를 제시 하는데 그 목적이 있다.

• 소성∙가공
• /
• 제8권3호
• /
• pp.271-271
• /
• 1999

A concentration change during grade transition operation in thin slab casting is investigated through computer simulation and the results are compared with experimental measurements. Fluid flow and mixing patterns in various tundish levers and flow rates were analysed by a three-dimensional mathematical model. Based on the contained results, a simple, efficient and accurate computational model is suggested to predict the concentration profile at the outlet of the tundish. Based on the model, mixing in and below the mold was analyzed considering electromagnetic braking force. The predicted concentration profiles show good agreements with the measured values. It is found that the lower vortices in the mold are suppressed by the electromagnetic field and a plug-like flow region develops, which decreases the intermixing of two different grades of steel and shortens the length of transition region.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2005년도 학술발표논문집
• /
• pp.272-277
• /
• 2005

Initial mixing characteristics in near field regions were analyzed by FLOW-3D, for analyzing mixing behavior of submerged discharge from freshwater lake in sea water. FLOW-3D model was applied to the region near Geum-ho dike for its verification. Simulation results from FLOW-3D were compared to the observed data for the verification periods. FLOW-3D showed resonable prediction results compared to the observed data, except underestimation in area near outfall. Particularly, FLOW-3D showed a good prediction for movement of buoyancy jets. In addition, FLOW-3D model was applied to the region near Saemangeum dike, which is to be constructed in near future. It was expected that the results of model application to Saemangeum area could provide substantial information in planning submerged discharge facilities. Based on the model applications to Saemangeum area, it was recommended that outfall should be located to the distance which gave an enough depth of outfall from water surface.

• 한국표면공학회지
• /
• 제24권3호
• /
• pp.137-143
• /
• 1991

The relation between the ion irradiation induced grain growth and the basic parameters sinvolved in ion beam mixing process was studied. TEM micrographs showed that a significant grain growth has been induced by Ar+ irradiation at room temperature. The grain size increases rapidly in low dose region, while it approaches a saturated value in high dose region, and it has close relationship with nuclear energy deposition and thermodynamic properties such as cohesive energy ( Hc) and heat of mixing ( Hm). A model for the grain growth based on the thermal spike induced atomic migration was developed and applied to interpret experimental results.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.541-542
• /
• 2006

A micro-size caterpillar mixer has been recently used fur desktop chemical factory and so attractive due to small investment fund for arranging the factory and high efficiency by mixing in sub micro-level region. We report the fabrication of caterpillar mixer and its surface treatment for enhancement of mixing performance. We used the

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2004년도 요약집 춘계학술발표대회
• /
• pp.97.1-97.1
• /
• 2004

• 대한기계학회논문집B
• /
• 제33권8호
• /
• pp.589-595
• /
• 2009

The instability wave formed near nozzle region grows to vortex with large scale in downstream region of spray. It plays an important role in the fuel-air mixing, combustion process and engine exhaust emissions in direct injection diesel engine. The objective of this study is to analyze effect of variant parameters (injection pressure, ambient gas density, etc.) and fuel properties on spray instability near nozzle region. Spray structure near nozzle region was investigated using a magnification photograph. A pulsed Nd-YAG laser was used as a light source, and image was taken by CCD camera. The following conclusions are drawn from this experimental analysis. In low ambient density, the effect of fuel properties on spray instability near nozzle region is dominant. In high ambient density, the effect of ambient gas on spray instability near nozzle region is dominant. High jet velocity has strong influence on spray instability.

• 한국농공학회지
• /
• 제33권3호
• /
• pp.81-90
• /
• 1991

The purpose of the this study was to investigate and analyze the various statistical data on the actual state of farmland uses given in Korea and Hokkaido of Japan. The results of this research are as follows ; 1. The rate of farmland uses was marked 118% and 99% in Korea and Hokkaido of Japan in 1988, respectively. That of Korea was higher than that of Hokkaido of Japan. The tendency of the value for Korea has been decreased since the value was shown peak in 1980, but that of the value for Hokkaido was found gradually the increased value. It was analyzed that the reason why the value was decreased in Korea was referred to avoid the crops culture, and the reason why the value was increased in Hokkaido was dueto increase the area of pasture. 2. The farmland use system according to region were d ue to be the mixing pattern of rice culture and dry-field crops in East region of korea and the type of mainly rice culture in West region. The pattern of farmland use system was used to be performed mainly the rice culture in Central region, the mixing type of rice culture and dry-field crops in South region, and the agriculture of mainly dry-field crops and dairy in East-North region in Hokkaido. 3. In the light of the rate of planting, the rate of rice culture and dry-field crops were 49% and 51% in Korea, respectively. As the values were 13% and 87% in Hokkaido of Japan, respectively, the dry-field crops attained the superiority. The main crop kinds was shown the rice culture in Korea and the feed plant in Hokkaido of Japan, respectively. 4. In considering the above results, there are much differences in agricultural style and industrialization processes in both country Korea and Japan. Especially much more differences were evident from farmland use system of Hokkaido Island where had unique agricultural style in Japan.

• Journal of Mechanical Science and Technology
• /
• 제16권7호
• /
• pp.999-1008
• /
• 2002

The spray structures and distribution characteristics of liquid and vapor phases in non-evaporating and evaporating Gasoline Direct Injection (GDI) fuel sprays were investigated using Laser Induced Exciplex Fluorescence (LIEF) technique. Dopants were 2% fluorobenzene and 9% DEMA (diethyl-methyl-amine) in 89% solution of hexane by volume. In order to study internal structure of the spray, droplet size and velocity under non-evaporating condition were measured by Phase Doppler Anemometry (PDA). Liquid and vapor phases were visualized at different moments after the start of injection. Experimental results showed that the spray could be divided into two regions by the fluorescence intensity of liquid phase: cone and mixing regions. Moreover, vortex flow of vapor phase was found in the mixing region. About 5㎛ diameter droplets were mostly distributed in the vortex flow region. Higher concentration of vapor phase due to vaporization of these droplets was distributed in this region. Particularly, higher concentration of vapor phase and lower one were balanced within the measurement area at 2ms after the start of injection.

• 대한기계학회논문집
• /
• 제9권4호
• /
• pp.403-413
• /
• 1985

본 논문에서는 수직벽 하류에 형성되는 박이 전단층의 발전과 재부착 그리고 재발전 경계층에 대해 평균 속도, 벽면의 압력 분포, 난류 강도, 레이놀즈 전단 압력 및 아직 수직벽에 대해서는 보고된바 없는 난류 떨림 속도 성분들의 3승곱 통계치를 측정하여 난류 구조의 변화를 분석하고 이를 수치적 계산 모델개발의 자 료로 제공하고자 함이 이 연구의 목적이다.