• 오토저널
• /
• 제11권3호
• /
• pp.37-48
• /
• 1989

The effects of burnt gas mixing, which can be caused by turbulent eddy mixing, on the interaction and extinction characteristics of premixed flames are analyzed using large activation energy asymptotics adopting counterflow as a model problem. The results show that the burnt gas mixing, preferential diffusion and heat loss affect the fuel consumption rate, flame temperature and the oxidizer concentration at the flame which influence the flame behavior and the extinction characteristics.

• Environmental Engineering Research
• /
• 제16권1호
• /
• pp.47-51
• /
• 2011

The oxygen transfer rate is a parameter that characterizes the gas-liquid mass transfer in surface aerators. Gas-liquid transfer mechanisms in surface aeration tanks depend on two different extreme lengths of time; namely, macromixing and micromixing. Small scale mixing close to the molecular level is referred to as micromixing; whereas, macromixing refers to mixing on a large scale. Using experimental data and numerical simulations, macro- and micro-scale parameters describing the two extreme time scales were investigated. A scale up equation to simulate the oxygen transfer rate with micromixing times was developed in geometrically similar baffled surface aerators.

• 환경위생공학
• /
• 제15권4호
• /
• pp.91-97
• /
• 2000

The objective of this study was to evaluate the possiblity of Foodwaste and co-treatment with other waste for vermistabilization. The value of oxidation-reduction potential(Eh) of the dewaterized foodwaste by a plant of subatmospheric evaporation was a possitive(+) value indicating, but the values of pH, salinity was idicating an unfavorable condition for earthworm life. The paper mill mixing waste properties by ripening for 20days were changed into the favorable range for earthworm. The growth of earthworms in foodwaste and mixing waste of paper mill 30% was found to be 68%, 84% for the survival rate, 227%, 275% for the liveweight increasing rate, respectively. The ingestion rate of foodwaste and mixing waste of paper mill 30% indicate 0.72g/g·d, 0.81g/g·d, respectively. About 62∼75% of ingestion amount produce cast and characteristics of cast indicate pH 6.1∼6.5 organic component 34∼42%, salinity 0.35∼0.4, CEC 73∼94 me/100g, N, P, K concentration 0.8∼1.2%, 0.4∼1.6%, 0.43∼0.5% respectively. Therefore it can be evaluated that the casts are good soil condition and organic fertilizer.

• 한국주조공학회지
• /
• 제5권3호
• /
• pp.19-26
• /
• 1985

This study has been carried out to examine into wettability of Cu-5%Sn alloy in $Al_2O_3$, MgO, $SiO_2$ and graphite, respectively and investigated into the change in macrostructure of Cu-5%Sn alloy according to kind and mixing rate of mold-coating. The results obtained from the experiment are summerized as follows; 1. Cu Cu-5%Sn alloy, wettabilities of $Al_2O_3$ and MgO were good, on the other hand, wettabilities of $SiO_2$ and graphite were bad. 2. The fine equiaxed zone was created because of the role of $Al_2O_3$ and MgO as preferential nucleation sites. 3. Notwithstanding change of mixing rate of $SiO_2$ in mold coating the equixed zone was not created. 4. The area of equiaxed zone was varied according to mixing rate in the case of using $Al_2O_3$ and MgO in mold-coating.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 추계 학술논문 발표대회
• /
• pp.30-31
• /
• 2016

Recently in the construction site is required various performance of mortar to deal with reliability, economy. Especially of environment-friendly, saving resources and high performance of mortar it began to require improvement of performance. Therefore, in this study, a series of tests was designed to develop a using mud flat mortar in view of the high absorption rate of tidal flats, to fix the water cement ratio to 70%. The mixing ratio were 10:0, 9:1, 8:2, 7:3, 6:4, 5:5, 4:6 of fine aggregate and mud flats. Compared the flow value, chloride content, compressive strength, tensile strength, and workability of fine aggregate the substituted mud flat mortar and basic cement mortar, present the basic data on the characteristics and effects of mud flat mortar.

• 한국전기전자재료학회논문지
• /
• 제26권7호
• /
• pp.567-574
• /
• 2013

An optical model is proposed in the white LED using phosphor and LED chip. In this paper a new model that describes the absorption rate and quantum efficiency with increasing the mixing ratio of phosphor in silicone, and the allotment of the phosphor absorption optical power in the several phosphor mixing in the silicone. Single phosphor in silicone from the optical measurement data before and after molding, the solution to get the blue optical power and the phosphor emission optical power is proposed. By these solution the absorption rate and the quantum efficiency was obtained. The model with single phosphor mixing in the silicone the validity was confirmed.

• Korea-Australia Rheology Journal
• /
• 제21권4호
• /
• pp.289-297
• /
• 2009

We numerically analyzed flow characteristics of the polymer melt in the screw equipment using a proper modeling and investigated design parameters which have influence on the mixing performance as the capability of the screw equipment. We considered the non-Newtonian and non-isothermal flow in a single rotor equipment to investigate the mixing performance with respect to screw dimensions as shape parameter of the single rotor equipment and screw speed as process parameter. We used Bird-Carreau-Yasuda model as a viscous model of the polymer melt and the particle tracking method to investigate the mixing performance in the screw equipment and considered four mixing performance indexes: residence time distribution, deformation rate, total strain and particle standard deviation as a new mixing performance index. We compared these indexes to determine design parameters and object function. On basis of the analysis results, we carried out the optimal design by using the response surface method and design of experiments. In conclusion, the differences of results between the optimal value and numerical analysis are about 5.0%.

• 대한기계학회논문집B
• /
• 제20권2호
• /
• pp.616-623
• /
• 1996

This paper investigates the linear stability of reacting mixing layers with special emphasis on the existence of multiple unstable modes. The governing equations for laminar flows are from two-dimensional compressible boundary-layer equations. The chemistry is a finite rate single step irreversible reaction with Arrhenius kinetics. For the incompressible reacintg mixing layer with variable density. A necessary condition for instability has been derived. The condition requires that the angular momentum, not the vorticity, to have a maximum in the flow domain. New inflectional modes of instability are found to exist in the outer part of the mixing layer. For the compressible reacting mixing layer, supersonic unstable modes may exist in the abscence of a generalized inflection point. The outer modes at high Mach numbers in the reacting mixing layer are continuations of the inflectional modes of low Mach number flows. However, the generalized inflection point is less important at supersonic flows.

• Journal of Biosystems Engineering
• /
• 제37권2호
• /
• pp.100-105
• /
• 2012

Purpose: Methane production potential in aerobic digestion was assessed according to feed to inoculum (F/I) ratio for food waste only, and mixing ratio of two materials for food waste and swine manure to give a basic data for the design of anaerobic digestion system. Methods: Anaerbic digestion test was performed using a lab scale batch reactor at $35^{\circ}C$ for six different feed to inoculum (F/I) ratios (0.50, 0.72, 1.14, 1.50, 2.14 and 3.41), three food waste to swine manure ratios (100:0, 60:40 and 40:60) with two different loading concentrations (10g VS/L and 30g VS/L). Results: For food waste only, the highest biogas yield of 1008 mL/gVS was obtained at 0.50 of F/I. For the co-digestion of food waste and swine manure mixture, the highest biogas yield of 1148 mL/gVS was obtained at a mixing ratio of 40:60 with loading concentration of 10g VS/L. Conclusions: F/I ratio for the food waste only, mixing ratio of food waste and swine manure, and co-substrate loading rate affected the biogas production rate. For the low loading rate, there was not so much difference according to the mixing ratio of food waste and swine manure, but for the high loading rate higher biogas yield was acquired for the co-digestion of food waste and swine manure than for the food waste alone (mixing ratio, 100:0).

• 한국방재학회 논문집
• /
• 제9권5호
• /
• pp.63-68
• /
• 2009

본 연구에서 물 흐름에 일정한 농도로 포 소화약제를 정확하게 혼합하는 포 소화설비용 소화약제 혼합장치의 성능향상을 위하여 포소화약제의 정량 혼합특성을 분석하였다. 펌프, 탱크, 압력계, 유량계, 노즐로 구성되는 성능평가 시스템을 사용하여 개발된 프로포셔너의 성능이 실험적으로 평가하였다. 결과적으로 라인프로포셔너의 포소화약제 혼합성능은 벤츄리 효과에 의한 물유량 증가와 오리피스 단면적 증가에 따라 증가하고 오차율 $\pm4%$이내의 범위에서 물 유량과 포소화약제 양의 혼합농도 3%의 성능을 보였다. 프레셔프로포셔너의 경우 물 유량 증가와 입구압력 증가에 따라 혼합성능이 증가하고 오차율 $\pm2%$이내의 범위에서 물 유량과 포소화약제 양의 혼합농도 3%의 성능으로 분석되었다.