• Fibers and Polymers
• /
• 제3권4호
• /
• pp.159-168
• /
• 2002

Polyurethane foams were produced by using a homogenizer as a mixing equipment. Effects of stirring speed on the foam structure were investigated with SEM observations. Variation of the bubble size, density of the foam, compressive strength, and thermal conductivity were studied. A hybrid foam consisting of polyurethane foam and commercial polystyrene foam is produced. Mechanical and thermal properties of the hybrid foam were compared with those of pure polyurethane foam. Advancement of flow front during mold filling was observed by using a digital camcorder. Four types of mold geometry were used for mold filling experiments. Flow during mold filling was analyzed by using a two-dimensional control volume finite element method. Variation of foam density with respect to time was experimentally measured. Creeping flow, uniform density, uniform conversion, and uniform temperature were assumed for the numerical simulation. It was assumed for the numerical analysis that the cavity has thin planar geometry and the viscosity is constant. The theoretical predictions were compared with the experimental results and showed good agreement.

• 한국결정성장학회지
• /
• 제6권1호
• /
• pp.19-31
• /
• 1996

갈륨 비소 반도체 결정을 성장시키는 데 많이 사용되는 수평브렷지만법에 의하여 성장된 갈륨비소 단결정 내에셔 불순물 분포를 알아보기 위하여 액상에서 열전달, 물질전달, 유 체흐름과 고상에서 열전달을 묘사하는 과도기 모탤을 수립하였고 유한요소법과 음함수 척분법 에 의하여 수치모사를 행하였다. 그 결과 Gr이 작은 경우에는 확산조절성장의 특성을 보였으며 G Gr이 1,700 정도만 되어도 농도의 최소값이 계면 근처로 이동하였다. 응고가 진행됨에 따라 계 면의 곡률이 증가하였고, 흐름에 의한 혼합이 안정될 때까지 수직편석이 증가하였다. 수펑편석 은 응고가 진행됨에 따라 증가하였지만 흐름의 강도가 강한 경우에는 곧 일정하게 유지되였다. G Gr이 아주 작거나 큰 경우에는 Smith식과 Scheil식의 경우와 잘 일치하였다.

• 대한토목학회논문집
• /
• 제28권5B호
• /
• pp.475-483
• /
• 2008

사고 등으로 인해 하천에 순간적으로 주입되는 오염물질의 2차원 이송-확산을 모의하기 위하여 SUPG법에 의한 2차원 유한요소 모형을 개발하고 주입된 질량과 모의 질량간의 오차를 산정하였다. 지배방정식으로부터 질량 오차 산정식을 유도하고 이를 간단한 예제에 적용하였다. 적용 예제로는 단순 직선수로에서 선원을 통한 질량주입과 일방향의 등질 유속장을 가지는 2차원 공간에서 점원을 통한 질량주입 문제를 가정하였으며, 기존의 Galerkin법과의 비교를 위하여 두가지 수치기법에 대한 모의 검증을 실시하였다. 검증결과 기존의 Galerkin법에 의한 모의 결과에 비하여 SUPG법을 통한 수치모형의 구성이 모의의 정확성뿐만 아니라 주입 질량의 보존에 있어서도 보다 정확한 방법임을 확인하였다.

• 보존과학회지
• /
• 제35권5호
• /
• pp.430-439
• /
• 2019

본 연구는 사비백제시기 사찰지에서 출토된 치미를 대상으로 화학적, 광물학적 특성에 대하여 분석하였다. 화학적 특성에서 군수리사지 출토 치미 1점을 제외한 대부분의 치미는 유사한 희토류 원소 분포패턴을 보이기 때문에 동일한 기반암에서 생성된 점토를 사용하였음이 확인된다. 하지만 주성분 및 미량원소 조성양상이 달라 동일 기반암이라 할지라도 차별화된 풍화과정을 겪었거나 제작과정에서 차이가 있었을 것으로 추정된다. 광물학적 특성은 3개의 유형으로 구분되며 Fe₂O₃-TiO₂의 도식에서 Fe₂O₃이 5 wt% 이상 검출되는 시료가 상대적으로 높은 소성온도로 제작되었을 것으로 추정되는 그룹과 동일한 양상이 확인된다. 따라서 출토지에 따른 동질성은 낮으나 시료 간의 군집 경향이 확인되어 사용처에 따른 제작이 이루어졌다고 보다는 사용시점에 따른 제작이 진행되었을 가능성이 높다.

• 자원환경지질
• /
• 제33권4호
• /
• pp.273-282
• /
• 2000

In order to investigate the extent and degree of arsenic and heavy metal contamination and the bioavailability of toxic elements around the abandoned mine in Korea, an environmental geochemical survey was undertaken in the Daduk mine. After appropriate preparation, tailings, soil, stream sediment, crop plant and fingernail samples were analysed for As, Cd, Cu, Pb and Zn by ICP-AES and ICP-MS. Elevated levels of 8,782 mg/kg As, 8.3 mg/kg Cd, 489 mg/kg Cu, 3,638 mg/kg Pb and 919 mg/kg Zn were found in tailings from the Daduk mine. These significant concentrations can impact on soils and sediments around the tailing ponds. Mean concentrations of As, Cd, Pb, Cu and Zn in soils are significantly higher than those in world average soil, especially for As and Pb. Element concentrations in sediments decrease with distance from the tailing ponds due to a dilution effect by the mixing of uncontaminated sediments. Arsenic and Cd are elevated in rice grains and stalks, and Cu and Zn concentrations in chinese cabbage, sesame and bean leaves are higher than the upper limit values for normal plant. Arsenic concentration in fingernails of farmers are higher than the normal level with a maximum value of 1.5 mg/kg. The post-ingestion bioavailability of toxic heavy metals in some paddy and farmland soils has been also investigated using the SBET (simple bioavailability extract test) method. The method utilises synthetic leaching fluids closelyanalogous to those of the human stomach. The quantities of As, Cd, Cu, Pb and Zn extracted from paddy soils after 1 hour indicated 15.9, 65.4, 46.2, 39.4 and 29.4% bioavailability, respectively and for farmland soils, 12.4, 26.0, 31.2, 29.3 and 19.4% bioavailability, respectively. The results of the SBET indicate that regular ingestion of soils by the local population could pose a potential health threat due to long-term toxic element exposure.

• 한국산업융합학회 논문집
• /
• 제27권3호
• /
• pp.685-692
• /
• 2024

Currently used heating elements are metal and non-metal heating elements, including various types of heaters, and resistance line heating elements have a problem of decreasing thermal efficiency over time, so to solve this problem, a planar heating element using high-purity carbon materials and oxidation-resistant inorganic compounds was applied. Through the manufacture of planar heating elements using CNT, ruthenium composite materials, and ruthenium oxide, physicochemical performance and capacity were increased, and instantaneous responsiveness was increased. Through thick film technology applicable to various base bodies, fine patterns were formed by the screening method in consideration of the fact that the performance of the heat source depends on the viscosity and pattern shape. The heating element was manufactured by thick film printing technology by mixing ruthenium oxide, CNT, Ag, etc. The characteristics of each paste were analyzed through viscosity measurement, and STS 430 was used as a base. Surface temperature and efficiency were measured by testing heaters manufactured for small wind tunnels and real-vehicle experiments. The surface temperature decreased as the air volume increased, and the optimal system boundary was found to be about 200 mm. Among the currently used heating elements, this paper manufactured a planar heating element using thick film technology to find out the relationship between air volume and temperature, and to study the surface temperature.

• 한국의류산업학회지
• /
• 제7권4호
• /
• pp.361-370
• /
• 2005

This study was intended to investigate intertextuality expressed in fashion; intertextuality within fashion as sex, T.P.O., texture, and coordination and intertextuality between fashion and other genre like animation, music, film and technology. Intertextuality obtained by mixing the masculine and feminine text, coordinating various element without regarding T.P.O., texture has contributed to expending aesthetic realm and redefining the aesthetic value of traditional fashion design. The influence of animation, music, film on fashion and the interaction between these genre and fashion integrated high-class fashion and street-fashion, created the multicultural hybrid. Moreover according to the change of lifestyle the fashionable technical clothing was needed and developed. The intertextual tendency in the 21st-century fashion has given the new possibility of fashion design.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.391-396
• /
• 2002

The so called setting is defined as the onset of rigidity in fresh concrete. In the analysis of the early-age concrete behavior, we consider fresh concrete as a structural element immediately after mixing. But for the activation of real structural behavior of fresh concrete, it takes some time after the beginning of hydration reaction. So, the very early age deformations due to hydration heat and shrinkage which occur before the setting do not produce restraint stresses. In this paper, we propose a setting characteristic model based on the so called percolation theory. From the analysis using the model, the influence of curing temperature is investigated and analytical results are compared with experimental results. From the comparison, the validity of proposed model is verified. This model is also applied to evaluate stress development in a temperature-stress test machine (TSTM) specimen and then the effect of setting time on the stress development is discussed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1670-1675
• /
• 2004

A thermal vapor compressor in which the subsonic/supersonic flow appears simultaneously, has been accurately designed through the CFD analysis for the various shape parameters such as the primary nozzle shape, converging duct shape. mixing tube diameter, and so on. The performance of the developed thermal vapor compressor has been experimentally verified to be installed in a Multi Effect Desalination(MED) plant as an important element, In this paper, the experimental results for Various boundary conditions(motive pressure, suction pressure, and discharge pressure) are presented in comparing with CFD results. The two results show a good agreement with each other within 3.5 % accuracy with regard to the entrainment ratio.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.490-493
• /
• 2004

In the analysis of early-age concrete behavior, the fresh concrete is considered as a structural element immediately after mixing. But for the activation of real structural behavior in the fresh concrete, the so-called setting time is necessary a few hours after the beginning of hydration reaction. In this paper, analysis on the setting behavior is carried out by proposing an analytical model based on the percolation theory as well as the expanding cluster model by defining the setting as a microstructure formation in fresh concrete. An experimental investigation is also carried out to show the influences of curing temperature, mineral admixtures and chemical admixture on setting behavior of fresh concrete. Finally, the analytical results using proposed model are compared with the experimental results for the sake of verification.