• Journal of the Korean Geotechnical Society
• /
• v.29 no.12
• /
• pp.45-56
• /
• 2013

Abrams equation could be effectively applied to predict strength of cement-admixed clay and clay-water content to cement content ratio is a fundamental parameter for governing strength. This paper analyses unconfined compression strength varying with $w_c/C$ and curing time using laboratory test results. An attempt is made to identify strength of composite soil of cement and clay according to variation of Abrams coefficients and curing time. The value B, which was considered to be constant value in past researches, needs to be considered as parameter variable with curing time. From Abrams equation a correlation was formed for unconfined compression strength with mixing conditions by $w_c/C$ and curing time as dependent variable. Regression results in this paper could be used to predict strength of cement-admixed clay at various mixing conditions.

• Applied Biological Chemistry
• /
• v.7
• /
• pp.45-52
• /
• 1966

This study was carried out to determine how the water soluble, the available $P_2O_5$ and urea-N would change in the course of time, when the mixtures of calcium superphosphate and urea with lime for fertilizer which occurred in Korea and largely contained calcium carbonate were made. Three kinds of materials, i. e., calcium superphosphate, urea and lime for fertilizer were used in this study. Three kinds of mixed fertilizer, i. e., A, B and C were made up by mixing these materials to satisfy the following formula. $$1)\;Ca(H_2PO_4)_2+CaCO_3+CO(NH_2)_2{\rightarrow}$$$$Ca_2H_2(PO_4)+H_2CO_3+NH_3$$ $$2)\;Ca(H_2PO_4)_2+CaCO_3+CO(NH_2)_2{\rightarrow}$$$$Ca_3(PO_4)_2+H_2CO_3+NH_3$$ $$3)\;Ca(H_2PO_4)_2+CaCO_3+CO(NH_2)_2{\rightarrow}$$$$Ca_3(PO_4)_2+H_2CO_3+CaCO_3+NH_3$$ A,B and C were placed in desiccators respectively a six month period. During the time of storage, the water soluble, the available phosphoric acid and urea-N were measured once a month, seven times with the control measurement. The results may be summarized as follows. 1. None of A, B and C showed any change in the urea-N with the lapse of time. This fact indicated that the combination of calcium superphosphate and urea with lime for fertilizer was not unfavourable. 2. A, B and C decreased in the amount of water soluble $P_2O_5$ with the passage of time. This fact indicated that the mixing of calcium superphosphate and urea with lime for fertilizer was unfeasible. 3. The available $P_2O_5$ in any of A,B and C did not undergo a change as time went by. This fact suggested that the combination of calcium superphate and urea with lime for fertilizer was favourable.

• Proceedings of the Optical Society of Korea Conference
• /
• 1997.08a
• /
• pp.34-34
• /
• 1997

• Journal of the Korean Geotechnical Society
• /
• v.35 no.3
• /
• pp.25-35
• /
• 2019

A laboratory test on uniaxial compressive strength was carried out by making 640 specimens in total, which were divided into two groups by their curing time of 7 and 28 days for 3 water content conditions of a water content at 100% saturation level and 10% and 20% increased water content from the state with clay, sand and gravel mixed grounds of 20 ground conditions of 4 types of stabilizer mixing conditions which were 8%, 10%, 12%, 14%, to understand laboratory strength characteristics for strength design of deep mixing ground. In case of clayey grounds, although the strength increased depending on the increase of stabilizer content, it showed to be analogous regardless of the curing time. And the impact on the strength development of deep mixing specimen according to water content was considered to be comparatively little compared to other grounds. For sandy grounds, the strength increment amount clearly showed to increase as stabilizer content increased, and also the increase of water content was determined to be decreasing the strength increment effect. For gravel mixed grounds, at 14% or over of stabilizer content, the effect on strength development was big making a large increase in strength, but compared to sandy grounds, the strength ratio depending on the curing time showed to be small.

• Journal of Mushroom
• /
• v.3 no.4
• /
• pp.140-144
• /
• 2005

This study was conducted to verify the cause of suppression symptom in mycelial growth during summer and to be able to establish a countermeasure. Cultivation of Flammulina velutipes was experimented with varying elapsed time of 0, 3, 6, 9 hours after mixing the sawdust media and two kinds of water temperature (normal water, $24^{\circ}C$ and cold water, $6^{\circ}C$) for mixing sawdust media. There were trends of increased media temperature from $24^{\circ}C$ to $31^{\circ}C$ and decreased pH from 6.5 to 5.2~5.6 with varying elapsed time from mixing the media to sterilization. Bacterial density also increased with bacterial density in Medium $24^{\circ}C$ being 1.9~4.1 times higher than that in Medium 6. Growth of F. velutipes was delayed with dual culture of bacteria isolated from sawdust media. Total nitrogen content of sawdust media was lowered by elapsed time from mixing the media to sterilization. The use of normal water($24^{\circ}C$) delayed mushroom growth by 1~2 days compared with that of cold water($6^{\circ}C$). Furthermore, mycelial growth of F. velutipes in the bottle cultivation ceased 9 hours after mixing the media. Primordia formation of F. velutipes was delayed by 1~3 days by elapsed time after mixing sawdust media, while fruit-body yield decreased by 7~12% 6 hours after mixing the media. Fruit-body yield was more stabilized with the use of cold water($6^{\circ}C$) than with that of normal water($24^{\circ}C$). Results showed that it is effective to use cold water as low as $6^{\circ}C$ in mixing media for F. velutipes cultivation, especially during summer when environmental temperature is high, high pressure sterilization after bottling work can prevent bacterial propagation in the media and can stabilize media ingredient.

• Journal of Wetlands Research
• /
• v.21 no.2
• /
• pp.102-113
• /
• 2019

Slack-tide sampling was carried out at 6 stations at high and low tide for a tidal cycle during spring tide of the early summer (June) and summer (July, August) of 2016 to determine the difference of water quality according to tide in Masan Bay, Korea. The mixing regime of all the water quality components investigated was well explained through the correlation with SAL. In the early summer and summer, TURB, DSi and NNN which mainly flow into the bay from the streams and SS, COD, AMN and $H_2S$ which mainly indicate the internal sink and source materials have a property of conservative mixing and non-conservative mixing, respectively. The conservative mixing showed a good linear relationship of the water quality between high and low tide, and the non-conservative mixing showed a variation of different pattern each other. Factor analysis performed on the concentration difference data sets between high and low tide helped in identifying the principal latent variables for them. In early summer, multiple effects (tidal action, natural influx and internal sinks and sources etc.) acted in combination for the differences to be distributed evenly in four factors (VF1~4), since there were few allochthonous inputs as a low-water season. On the contrary, in summer, the parameters showing large concentration difference at ST-1 affected by stream water were concentrated in one factor (VF1) and clearly distinguished from the parameters affected by the internal sinks and sources. In fact, there is no estuary (bay) that always maintains steady state flow conditions. The mixing regime of an estuary might be changed at any time due to the change of flushing time, and furthermore the change of end-member conditions due to the internal sinks and sources makes the occurrence of concentration difference inevitable. Therefore, when investigating the water quality of the estuary, it is necessary to take a sampling method considering the tide to obtain average water quality data.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.83-86
• /
• 2002

We suggest binary image decryption system using two-wavc mixing in Photorefractive crystal. Compared with a conventional method, this method can make optical alignment easily, and brighten the encrypted image even if a small input signal, by index grating of photorefractive crystal. Also it can reconstruct the encrypted image by only reference beam in real time.

• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.275-278
• /
• 1990

This study investigated electrical characteristics of solid and liquid epoxy rosins by measuring dielectric breakdown and dielectric loss when epoxy resins were exposed to a mixing cure, i.e., Fusion Blend Method. It was found that mixing epoxy resins were superior to dielectric breakdown and has shorter curing time compare with those of pure liquid epoxy resins.

• Elastomers and Composites
• /
• v.27 no.4
• /
• pp.262-266
• /
• 1992

A number of tin-containing elastomers are produced commercially by Korea Kumho Petrochemical Co., Ltd. (KKPC) under the Kosyn Sol tradename. The effect of mastication of commercial and laboratory polymerized S-SBR has, been investigated using chemical mixer(ML-500), NMR, GPC and Mooney viscometer. Mastication of polymers containings coupling bonds is affected by the amount of stearic acid, the temperature of mixing and the time length of mixing.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.207-210
• /
• 2002

We suggest binary image decryption system using two-wave mixing in photorefractive crystal. Compared with a conventional method, this method can make optical alignment easily, and brighten the encrypted image even if a small input signal, by index grating of photorefractive crystal. Also it can reconstruct the encrypted image by only reference beam in real time.