• Journal of the Korea Concrete Institute
• /
• v.25 no.4
• /
• pp.411-418
• /
• 2013

Recently, in order to reduce a damage of chloride attack and hydration heat in marine concrete structures, blended cement in mixing the marine concrete is widely used. Long term strength development is distinct in concrete with blended cement and it also has excellent resistance to chloride attack and reduction of hydration heat. However, blended cement has a characteristic of relatively low compressive strength in early age of 28 days. On the other hand, a high level of compressive strength is required in the Standard Specification for marine concrete mix design. Such concrete mix design satisfying Standard Specification is effective to chloride attack but disadvantageous for hydration heat reduction due to large quantity of binder. In this study, the material properties of marine concrete considering water-binder ratio and binder type are experimentally investigated. Through the research results, compressive strength in blended cement at the age of 56 days is similar although it has smaller compressive strength at the age of 28 days compared with result of OPC (ordinary portland cement). Even though blended cement has a large water-binder ratio and small unit of binder content, chloride ion diffusion coefficient is still small and hydration heat is also found to be reduced. For meeting the required compressive strength in Standard Specification for marine concrete at 28 days, the increased unit content of binder is needed but the increased hydration heat is also expected.

• Korean Journal of Remote Sensing
• /
• v.35 no.6_3
• /
• pp.1187-1195
• /
• 2019

We, for the first time, developed a Raman lidar system which can remotely detect surface CO₂ volume mixing ratio (VMR). The Raman lidar system consists of the Nd: YAG laser of wavelength 355 nm with 80 mJ, an optical receiver, and detectors. Indoor CO₂ cell measurements show that the accuracy of the Raman lidar system is calculated to be 99.89%. We carried out the field measurement using our Raman lidar at Pukyong National University over a seven-day period in October 2019. The results show good agreement between CO₂ VMRs measured by the Raman lidar (CO₂ Raman Lidar) and those measured by in situ instruments (CO₂ In situ) which located 300 m and 350 m away from the Raman lidar system. The correlation coefficient (R), mean absolute error (MAE), and root mean square error (RMSE) between CO₂ In situ and CO₂ Raman Lidar are 0.67, 2.78 ppm, and 3.26 ppm, respectively.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.5
• /
• pp.63-70
• /
• 2009

This study is part of an ongoing research project on the development of a sound-absorbing lightweight foamed concrete manufactured by a hydro-thermal reaction between silica and calcium. As the silica source, pulverized bottom ash was used, and as several cementitious powders of ordinary portland cement, alumina cement and calcium hydroxide were used. Manufacture of foamed concrete was accomplished using the pre-foaming method to make a continuous pore system, which is the method of making the foam by using a foaming agent, then making the slurry by mixing the foam, water, and powders. The experiment factors are W/B, foam agent dilution ratio, and foam ratio, and test items are compressive strength, dry density, void ratio, and absorption rate, as evaluated by NRC. The experiment results showed that the sound absorption of lightweight foamed concrete satisfied NRC requirements for the absorbing materials in most of the experiments. It is thus concluded that foam ratio was the most dominant factor, and significantly affected all properties of lightweight foamed concrete in this study. W/B rarely affected total void ratio and continuous void ratio as well as compressive strength, and dry density and foam agent dilution ratio also had little effect onalmost all properties. The analysis of the correlation between NRC, absorption time, continuous void ratio, and absorption time showed that the interrelationship of the continuous void ratio was high.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.5
• /
• pp.127-133
• /
• 2009

It is important to increase the strength of binders in order to enhance the strength of concrete. However, when the mineral admixture used for high strength concrete is incorporated individually, its dispersibility decreases due to the phenomenon of compaction, which reduces its fluidity and results in insufficient strength being created. To solve this problem, we can pre-mix each binder in advance to disperse a mineral admixture among binders, which will strengthen the fluidity and strength of concrete. Therefore, this study analyzed the properties of high strength concrete depending on the mix method used, to determine the effect of pre-mix cements ranging from W/B 15 to 35%. It was found that the fluidity of pre-mix increased to a level higher than that of individual mix due to its dispersion and ball bearing effect. The air content was slightly decreased from the result of individual mix due to the micro filler effect, which causes fine particles of silica-fume to fill the voids among cement particles, while the setting time of pre-mix was shorter than that of individual mix, because enhanced dispersion of pre-mix affects hydration heat time. The compressive strength of pre-mix increased due to the phenomenon of compaction of gap structure, and the variation of coefficient decreased by 1.69% on average in strength variation.

• Korean Journal of Community Nutrition
• /
• v.4 no.2
• /
• pp.219-230
• /
• 1999

The purpose of this study was to find out the common characteristics of eating behaviors of the long-lived elderly in order to offer the basic data for establishing dietary guidelines for a long and healthy life for the general population. The subjects were three-hundred elderly people over age 85 living in Kyungpook Sung-ju who have no problems in daily living. The general characteristics, nutrition knowledge and attitudes, meal patterns, and food preferences of the subjects were surveyed by individual intervies. The levels of the nutrition knowledge of the subjects were very low(average score ; 4.3) and the correlation coefficient between their nutrition knowledge and attitude score was also low(r=0.323, p=0.000). Most of the subjects(93%) had a regular meal pattern consuming three meals a day. The major staple food was rice mixed with other grains(75%) and the number of side dishes was mostly under four(99%). A majority(73%) had no habit of overeating and 51% of the subjects were taking snacks besides regular meals. Thirty one percent of the subjects had drinking habits and 80% of the drinking subjects had over 40 years of drinking history. The most common frequencies for intakes of various food groups were ; more than once a day(95%) for vegetables ; 2∼3 times a week(74%) for green and orange color vegetables ; 2∼3 times a week(72%) for fruits ; once a day(70%) for fish, eggs and legumes ; 2∼3 times a week(49%) for milk ; 2∼3 times a week(72%) for fruits ; once a day(70%) for fish, eggs and legumes ; 2-3 times a week(49%) for milk ; 2-3 times a week(85%) for seaweeds and 2-3 times a week(81%) for foods cooked with oil. The most preferred foods by the subjects were white rice(staple foods), soybean paste soup(soups), beef and eggs(meats and eggs), yellow croaker and hair tail(fish and shellfish), yoghurt(milk and milk products), all vegetables except carrot(vegetables), and watermelon(fruits). The popular food preparation methods included mixing with seasonings and the most preferred taste was sweet. The results showed that the eating pattern of long-lived elderly was characterized by regularity, simplicity, and no overeating.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.105-105
• /
• 2009

$ZrO_2$ is one of the most attractive high dielectric constant (high-k) materials. As integrated circuit device dimensions continue to be scaled down, high-k materials have been studied more to resolve the problems for replacing the EY31conventional $SiO_2$. $ZrO_2$ has many favorable properties as a high dielectric constant (k= 20~25), wide band gap (5~7 eV) as well as a close thermal expansion coefficient with Si that results in good thermal stability of the $ZrO_2/Si$ structure. In order to get fine-line patterns, plasma etching has been studied more in the fabrication of ultra large-scale integrated circuits. The relation between the etch characteristics of high-k dielectric materials and plasma properties is required to be studied more to match standard processing procedure with low damaged removal process. Due to the easy control of ion energy and flux, low ownership and simple structure of the inductively coupled plasma (ICP), we chose it for high-density plasma in our study. And the $BCl_3$ included in the gas due to the effective extraction of oxygen in the form of $BCl_xO_y$ compound In this study, the surface kinetic properties of $ZrO_2$ thin film was investigated in function of Ch addition to $BCl_3/Ar$ gas mixture ratio, RF power and DC-bias power based on substrate temperature. The figure 1 showed the etch rate of $ZrO_2$ thin film as function of gas mixing ratio of $Cl_2/BCl_3/Ar$ dependent on temperature. The chemical state of film was investigated using x-ray photoelectron spectroscopy (XPS). The characteristics of the plasma were estimated using optical emission spectroscopy (OES). Auger electron spectroscopy (AES) was used for elemental analysis of etched surface.

• Journal of the Microelectronics and Packaging Society
• /
• v.11 no.3 s.32
• /
• pp.17-22
• /
• 2004

The microwave dielectric properties of $CaZrO_3$ ceramics with addition of $CaTiO_3$ were studied. The effect of glass addition on the low-temperature sintering and microwave dielectric properties of $CaZrO_3-CaTiO_3$ ceramics were also evaluated to develop the materials for functional substrates of low-temperature co-fired ceramics. When $10-20 wt\%$ of lithium borosilicate glass was added, the sintering temperature of the $CaZrO_3-CaTiO_3$ ceramics decreased from $1450^{\circ}C$ to below $900^{\circ}C$. As the $T_f$ of glass frits and $CaZrO_3$ are slightly negative and that of $CaTiO_3$ is significantly positive, zero $T_f$ could be realized by mixing an appropriate amount of $CaTiO_3$ with $CaZrO_3$. The $CaZrO_3-CaTiO_3$ ceramics sintered at $875^{\circ}C$ with $15wt\%$ glass frits showed the relative density of $98\%$, permittivity of 23, quality factor of 2500 GHz, and temperature coefficient of resonant frequency of $ -3 ppm/^{\circ}C$.

• The Journal of Engineering Geology
• /
• v.20 no.3
• /
• pp.297-310
• /
• 2010

This study represents basic research into the utilization of mixed ash (fly ash and bottom ash) from the ash pond of the Taean Thermal Power Plant as a construction material. We conducted physical and mechanical experiments on the mixed ash and examined its engineering characteristics in terms of its use as a material for road landfill and structure backfill. We evaluated the physical and chemical characteristics of the ash by performing tests to determine specific gravity, maximum and minimum density, liquid limit and plastic limit, grain size distribution, composition (by X-ray diffraction), and loss on ignition. We also evaluated the mechanical characteristics by testing for permeability, compaction, CBR, and tri-axial compression. The experiments on the mixed ash yielded a specific gravity of 2.18-2.20, dry density of $9.38-13.32\;kN/m^3$, modified CBR of 16.5%-21%, permeability coefficient of 1.32 to $1.89-10^{-4}cm/sec$, and drained friction angle of $36.43^{\circ}-41.39^{\circ}$. The physical and mechanical properties of the mixed ash do not meet the quality standards stipulated for road landfill and structure backfill materials. Mixed ash with a high content of fly ash failed to meet some of the quality standards. Therefore, in order to utilize the mixed ash as a material for road landfill and structure backfill, it is necessary to improve its properties by mixing with bottom ash.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.4
• /
• pp.47-54
• /
• 2010

This study is progressed function ratio, it's trued taste by an experiment to present data for human work light weight aggregate development that use clink ash progressed liquid limit, small success limit, wear loss in quantity, sand equivalent, sieve cutting examination. 80:20's match of function rain examination is 1.4, and that use rubble aggregate as recyeled-panit lightweight aggregate's capacity ratio increases by 1.0 increase of function rain many. Also, examination multiplied delicate flavor gradually according to increase of the mixing rate, and absorption coefficient increased. This is judged by phenomenon that appear by special quality upper recycled-panit of polystyrene bid and porosity's increase between lightweight aggregate. It is case that use aggregate of wear loss in quantity is 13.5 in sand equivalent and a wear loss in quantity experiment and although case that mix 20% increases by 14.4, this phenomenon by weak tissue of lightweight aggergate be judged. When it's as a these experiment, the statue prevention floor of a street improvement specifications is prescribing so that satisfy by sand equivalent 20, CBR 10. This is showed result that this satisfies in quality standard all in match experiment ago that see.

• Journal of Veterinary Clinics
• /
• v.23 no.4
• /
• pp.416-420
• /
• 2006

Compare to testing sera individually, pooled-serum testing has considered as a cost-effective method, particularly on a large population-based seroprevalence studies. This study was to determine the relationship between individual sera and pooled sera titers for detection of avian infectious bronchitis virus (IBV) and to evaluate suitability of pooled sera by comparing prevalences estimated from both samples. A total of 5,000 individual samples were collected from 500 flocks in Chungcheong, Gyunsgi, and Kangwon provinces between January 2005 and February 2006. Ten samples were randomly selected from each flock. Five-hundred pooled sera were prepared by mixing equal amount of each 10 individual serum from the original samples. IBV antibody titers were measured by hemagglutination inhibition (HI) test. The least squares regression analysis was performed to construct equation between pooled and mean individual titers. To determine whether the flock is infected 4 arbitrary criteria were used: detection of at least 1 chicken with HI titer ${\ge}$ 9 (criterion 1), detection of at least 2 samples with HI titer ${\ge}$9 (criterion 2), detection of at least 1 sample with HI titer ${\ge}$ 10 (criterion 3), and filially detection of at least 1 sample with HI titer ${\ge}$ 11 (criterion 4). The receiver operating characteristic (ROC) curve was used to examine the cut-off points of pooled titers showing optimal diagnostic accuracy. The area under the curve (AUC), sensitivities (Se), specificities (Sp), and positive (PPV) and negative (NPV) predictive values were calculated. The regression equation between pooled titers (pool) and mean individual titers (mean) was: $pool= 1.2498+0.8952{\times}mean$, with coefficient of determination of 87% (p< 0.0001). The optimal cut-off points of pooled titers were titer 8 for criterion 1 (AUC=0.975, Se=0.883, Sp=0.959, PPV=0.985, NPV=0.728), titer 8 for criterion 2 (AUC=0.969, Se=0.954, Sp=0.855, PPV=0.926, NPV=0.907), titer 9 for criterion 3 (AUC=0.970, Se=0.836, Sp=0.967, PPV=0.978, NPV=0.772), and titer 9 for criterion 4 (AUC= 0.946, Se=0.928, Sp=0.843, PPV=0.857, NPV=0.921). The difference of 'prevalence estimated by individual and pooled sample showed a minimum of 2% for criteria 2 and a maximum of 9.1:% for criteria 3. These results indicate that the use of pooled sera in HI test for screening IBV infection in laying hen flocks is considered as a cost-effective method of testing large numbers of samples with high diagnostic accuracy.