• Asian-Australasian Journal of Animal Sciences
• /
• 제31권4호
• /
• pp.564-568
• /
• 2018

Objective: This experiment was conducted to determine the effects of dietary ${\beta}$-mannanase on the additivity of true metabolizable energy (TME) and nitrogen-corrected true metabolizable energy ($TME_n$) for broiler diets. Methods: A total of 144 21-day-old broilers were randomly allotted to 12 dietary treatments with 6 replicates. Five treatments consisted of 5 ingredients of corn, wheat, soybean meal, corn distillers dried grains with solubles, or corn gluten meal. One mixed diet containing 200 g/kg of those 5 ingredients also was prepared. Additional 6 treatments were prepared by mixing 0.5 g/kg dietary ${\beta}$-mannanase with those 5 ingredients and the mixed diet. Based on a precision-fed chicken assay, TME and $TME_n$ values for 5 ingredients and the mixed diet as affected by dietary ${\beta}$-mannanase were determined. Results: Results indicated that when ${\beta}$-mannanase was not added to the diet, measured TME and $TME_n$ values for the diet did not differ from the predicted values for the diet, which validated the additivity. However, for the diet containing ${\beta}$-mannanase, measured $TME_n$ value was greater (p<0.05) than predicted $TME_n$ value, indicating that the additivity was not validated. Conclusion: In conclusion, the additivity of energy values for the mixed diet may not be guaranteed if the diet contains ${\beta}$-mannanase.

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권8호
• /
• pp.1149-1156
• /
• 2001

Previous studies conducted with swine have reported that the mobile nylon bag technique (MNBT) does not always accurately predict in vivo nutrient digestibilities. Therefore, in this study, the MNBT was modified so that nutrient digestibilities would more closely resemble those from conventional (Con) digestibility studies obtained using the indicator method. A total of 19 feeds were tested including five cereal grains, five legumes, three high protein sources and six mixed diets. The principle changes to the MNBT included the use of a fecal collection harness which minimized the number of bags lost. In addition, previous protocols involved pooling of bags within pig while in the present experiment all bags were analyzed separately to increase the precision of the test. Finally, chemical analyses were done using the entire nylon bag plus residue rather than opening.the bags and scraping out the contents. With the exception of the barley sample (p=0.01), dry matter digestibility (DMD) coefficients obtained with the MNBT were not significantly different from those obtained with the indicator method. The linear regression equation relating the MNBT to the indicator method was Con DMD=-O.77+1.02 MNBT DMD ($r^2=0.93$: p<0.0001). There was no significant (p>0.05) difference in gross energy digestibility (GED) coefficients determined using the MNBT or the indicator method for any of the 19 feeds. The regression line equation relating the MNBT to the indicator method was Con GED=-5.68+1.06 MNBT GED ($r^2=0.94$: p<0.0001). The MNBT was less effective in predicting in vivo crude protein digestibility (CPD) than it was in predicting dry matter and energy digestibility. Differences greater than five percentage units were observed for two of the legumes, Kabuli chickpeas (p=0.02) and the extruded pea-canola seed mixture (p=0.01) as well as for three of the mixed diets including the unheated hulled barley-based diet (p=0.01), the unheated hulless-barley based diet (p=0.08) and the barley-soybean meal based diet (p=0.008). The regression equation relating the MNBT to the indicator method was Con CPD=5.75 + 0.90 MNBT CPO ($r^2=0.76$; p<0.0001). This study indicates that the modified MNBT can be used for the rapid determination of dry matter and energy digestibility in a wide variety of ingredients. For the measurement of crude protein digestibility, the technique produces results similar to conventional digestibility studies for cereal grains and high protein feeds but tends to overestimate protein digestibility for legumes and mixed diets.

• 한국식품영양과학회지
• /
• 제45권6호
• /
• pp.880-888
• /
• 2016

고추장 재료(잡곡, 죽염)와 종균을 이용하여 제조된 고추장은 일반적인 고추장에 비해 수분 함량, pH, 산도, 색도는 특별한 차이를 보이지 않았다. 모든 고추장 시료는 발효기간이 지남에 따라 수분 함량은 증가하고 pH는 감소하였으며, 산도, 아미노태 질소는 증가하였다. 잡곡과 죽염, 유산균이 들어간 혼합균주 스타터 고추장(MG-BS-ABL)은 6주간 발효되었을 때 아미노태 질소, 유리아미노산의 양이 다른 고추장에 비해 유의적으로 많은 것으로 나타났다(P<0.05). 또한, 관능평가에서 외관, 향기, 맛, 전반적인 기호도가 모두 다른 고추장에 비해 높은 점수를 나타내었다. 이상의 결과로 MG-BS-ABL군은 일반적인 고추장과 유사한 고추장의 품질 특성을 나타내었으며, 아미노태 질소, 유리아미노산의 함량이 높아 관능평가에서도 높은 점수를 얻은 것으로 생각된다. 이 결과는 아마도 기장에 함유된 높은 단백질의 함유량과 죽염의 미네랄 조성, Aspergillus oryzae, Bacillus subtilis와 Lactobacillus plantarum의 혼합균주 메주의 발효에 의한 것으로 생각한다.

• 한국환경복원기술학회지
• /
• 제5권4호
• /
• pp.1-9
• /
• 2002

This study is carried out to make the environmentally affinitive porous planting block for revegetation and to make a effective program for greening plans. The summary is shown below. 1. In order to get stronger intensity and distribute proper porosity in the block for planting, the cements mixed with fine soil were used and the finer in soil grains gives the stronger in intensity of the cements. Use of the furnace slag cements instead of the portland cements showed relatively stronger in intensity of the block. The intensity of the block became stronger when the mixed ratio of the cements to soil is 5 : 1, but the pore space ratio was lower. The percolate pH of the portland cements after one month of treatment was 13.1 but the percolate pH of the furnace slag cements was shown lower. To mold proper porous planting blocks, the proper combination of additives such as the dehydrating agent, elastic agent and adhesives into the mixture of cements and soil gives better effectives. 2. After molding the porous planting blocks, it gave a better result when the grains of the filler made of peat moss, upland soil and compound fertilizer were smaller than 2 mm in size. Shaking of the filling materials also gave the better result, but it took more time and cost much more. Therefore, it was better when the filling materials were mixed with water first then flew down for stuffing. 3. It was necessary to cover with soil after seeding or planting on the porous planting blocks. The proper thickness of the soil to help root development and keep moisture is about 3~5 cm. 4. The plants for planting on the porous planting block were required stronger in the growth condition of their roots and their environmental adaptability. The average germination percentage and rate of Platycodon grandiflorum on the porous planting block were 88.8% and 85% accordingly and their rate is very uniform. The germination rates of Dianthus superbus var. longicalycinus and Taraxacum officinale were more than 50%. These grass species, Chelidonium majus var. asiaticum, Lysimachia mauritiana and Scabiosa mansenensis were the suggested biennial grasses in the planting area where exchanging of the seedling or nursery plants was not necessary because their germination rates were 59.3, 45.6 and 40.3% accordingly. Viola kapsanensis, Chrysanthemum sp., Taraxacum sp. and Iris ensata var. spontanea are the grass species that could be used by seeding for greening. However, the germination rate of Solidago virga-aurea var. asiatica, Aster scaber and Lythrum anceps were lower than 10%. The coverage ratio of Ixeris stolonifera is more than 80% after 60 days seeding and the root length of most of species are more than 10 cm except Iris ensata var. spontanea and Platycodon grandiflorum because their root developed thicker than other species.

• 한국주조공학회지
• /
• 제14권6호
• /
• pp.530-540
• /
• 1994

Aluminium-silicon alloy(JIS AC8A) matrix composites reinforced with SiC particles were fabricated by spray-cast forming process, and the microstructure of powders and preforms produced were studied by using an optical and scanning electron microscopy. SiC particles were co-sprayed by mixed phase injection method during the spray casting process. Most of the composite powders formed by this mixed phase injection method exhibit morphology of particle-embedded type, and some exhibits the morphology of particle attached type due to additional attachment of the SiC particles on the surface of the powders in flight. The preforms deposited were resulted in dispersed type microstructure. The pre-solidified droplets and the deposited preform of SiC-reinforced aluminium alloy exhibit finer equiaxed grain size than that of unreinforced aluminium alloy. Eutectic silicons of granular type are crystallized at the corner of the aluminum grains in the preforms deposited, and some SiC particles seem to act as nucleation sites for primary/eutectic silicon during solidification. Such primary/eutectic silicons seem to retard grain growth during the continued spray casting process. It is envisaged from the microstructural observations for the deposited preform that the resultant distribution of SiC injected particles in the Al-Si microsturcture is affected by the amount of liquid phase in the top part of the preform and by the solidification rate of the preform deposited.

• 한국식물병리학회지
• /
• 제10권4호
• /
• pp.297-304
• /
• 1994

This study was carried out to develop bioassay for detection of pesticide residues in agricultural products by using the soil microbial isolates sensitive to pesticides. One hundred bacterial isolates and eighty five fungal isolates were obtained from soil and their sensitivity to 10 ppm of several pesticides was examined in vitro. Five bacterial isolates and three fungal isolates were found sensitive to organochloride fungicide and two fungal isolates sensitive to organocopper fungicide. Among these isolates, B46, B93 and F67 were tested to find out the difference in sensitivity according to the methods of fungicide treatment. All of the isolates were found sensitive to 10 ppm of organochloride fungicides mixed directly in PDA. But they were found insensitive to the fungicide mixed in PDA after filtering through membrane filter. In case of organocopper fungicide, the isolates were found sensitive only when it was treated in PDA. And their sensitivity showed difference among various kinds of organochloride fungicides. B46 and B93 were employed to check the possibility as the agent for detection of the pesticidal residues in twenty eight agricultural products including rice. It was found that all samples had not residues because the samples did not inhibit the growth of isolates. When organochloride fungicides were applied to the above products, it was possible to detect the residues in fruits and vegetables at the concentration of 10 ppm, but not in starch-rich grains. B46 and B93 were identified as Bacillus sp. according to their bacterial characteristics in culture.

• Journal of Biosystems Engineering
• /
• 제42권3호
• /
• pp.155-162
• /
• 2017

Purpose: The objective of this study was to evaluate the biogas productivity of agricultural by-products (ABPs) based on their proximate composition. Specifically, the effects of proximate composition were investigated, and a new mixing method was developed using various ABPs that are difficult to digest for biogas production. Methods: Experiments were conducted to compare the biogas productivity between a single ABP and a mixture of ABPs that had the same proximate composition as the single ABP. To match the proximate compositions of radish waste and corn distiller's dried grains with solubles (DDGS), mixed ABPs were made from various ABPs. Biogas potential tests (BMP tests) were performed at an organic loading rate (OLR) of 2.5 g VS/L and a feed to microorganism ratio (F/M) of 0.5 under the mesophilic condition. Results: The individual ABPs (radish and corn DDGS) and the mixed ABPs (cabbage waste with skim milk waste, bean-curd waste with skim milk waste, and some others) produced similar amounts of biogas. Conclusions: The new mixing method based on proximate composition can be applied to other ABPs and organic wastes from factories and municipal waste treatment plants to develop renewable energy and effective waste treatment methods.

• 대한금속재료학회지
• /
• 제49권1호
• /
• pp.32-39
• /
• 2011

The present investigation was performed on the die compaction and sintering behavior of Fe micro-nano mixed powder with a mixed binder for powder injection molding. Warm die compaction of the feedstock for simulation of the static injection molding process was conducted using a cylindrical mold of 10 mm diameter at $100^{\circ}C$ under 4MPa. The die compaction of the micro-nanopowder feedstock underwent a uniform molding behavior showing a homogeneous distribution of nanopowders among the micropowders without porosity and distortion. After debinding, the powder compact maintained a uniform structure without crack and distortion, leading to a high green density of 64.2% corresponding to the initial powder loading of 65%. The sintering experiment showed that the micro-nanopowder compact underwent a near full and isotropic densification process during sintering. It was observed that the nanopowders effectively suppressed the growth of micropowder grains during densification process. Conclusively, the use of nanopowder for PIM feedstock might provide a new concept for processing a full density PIM parts with fine microstructure.

• 산업식품공학
• /
• 제14권1호
• /
• pp.54-59
• /
• 2010

본 연구에서는 영양과 건강, 그리고 편의성까지 고려한 즉석식품 형태의 쌀미음을 제조하였다. 제조된 쌀미음 분말의 영양성분 구성비를 일반성분 분석을 통하여 분석 하였고, 과립공정에 따른 재수화능의 향상을 연구하였다. 과립분말은 혼합분말보다 지방함량과 단백질 함량이 각각 0.9, 1.9% 높게 나타난 반면, 탄수화물 함량은 상대적으로 3.2% 낮게 나타났다. 과립분말의 단백질 조성은 71.1-118.5 g으로 1일 권장 단백질 섭취량 45-55 g보다 많았는데, 이는 일반적인 환자식이 지니는 공통적인 특성이다. 분말 입자의 침강 속도를 보여주는 분산성의 경우 과립분말(93.7%)은 혼합분말(77.0%) 보다 높게 나타났고, 재수화에 걸리는 시간도 과립분말(122.3 초)이 혼합분말(305.3 초)보다 빨랐으며 이들 결과는 과립공정이 분말의 재수화능을 향상시켜 주었음을 보여준다. 호화쌀가루를 이용한 쌀미음은 기존의 우유 단백질 위주의 환자식을 곡류로 대체하며 영양강화 쌀 가공제품의 개발에 의미가 있다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 추계학술발표대회
• /
• pp.31.1-31.1
• /
• 2009

In an approach to acclimate ourselves torecent ecological consciousness trend, a lead-free piezoelectric material, bismuth sodium titanate (abbreviated as BNT) based bismuth sodium barium titanate (abbreviated as BNT-BT), was considered as an environment-friendly alternative for a lead based piezoelectric system. Ceramic specimens of0.94[(BixNa0.5)TiO3]-0.06[BaTiO3] (x = 0.500~0.515) compositions were prepared by a modified mixed oxide method. To increase the chemical homogeneity andre action activity, high energy mechanical milling machine and pre-milled nanosized powder has been used. In this method (BixNa0.5)TiO3 (x=0.500~0.515) andBaTiO3 were prepared separately from pre-milled constituent materials at low calcination temperature and then separately prepared BNTX (X=1, 2, 3 and 4) and BT were mixed by high energy mechanical milling machine. Without further calcination step the mixed powders were pressed into disk shape and sintered at $1110^{\circ}C$. Microstructures, phase structures and electrical properties of the ceramic specimens were systematically investigated. Highly dense ceramic specimens with homogenous grains were prepared in spite of relatively low sintering temperature. Phase structures were not significantly influenced by the excess amount Bi. Large variation on the piezoelectric and dielectric properties was detected at relative high excess Bi amounts. When $x{\leq}0.505$, the specimens exhibit insignificant variation in piezoelectric and dielectric constant though depolarization temperature is found to be decreased. Considerable amount of decrease in piezoelectric and dielectric properties are observed with higher excess of Bi amounts ($x{\geq}0.505$). This research indicates the advantages of high energy mechanical milling and importance of proper maintenance of Bi stoichiometry.