• Earthquakes and Structures
• /
• v.4 no.2
• /
• pp.203-217
• /
• 2013

In recent decades, it has been realized that increasing the lateral stiffness of structure subjected to lateral loads is not the only parameter enhancing safety or reducing damage. Factors such as ductility and damping govern the structural response due to lateral loads. Despite the significant contribution of damping in resisting lateral loads, especially at resonance, there is no accurate mathematical representation for it. The main objective of this study is to develop a damping identification procedure for linear systems based on a mixed numerical-experimental approach, assuming viscous damping. The proposed procedure has been applied to a laboratory experiment associated with a numerical model, where a hollow rectangular steel cantilever column, having three lumped masses, has been fixed on a shaking table subjected to different exciting waves. The modal damping ratio has been identified; in addition, the effect of adding filling material to the hollow specimen has been studied in relation to damping enhancement. The results have revealed that the numerically computed response based on the identified damping is in a good fitting with the measured response. Moreover, the filling material has a significant effect in increasing the modal damping.

• Journal of the Korean Society for Railway
• /
• v.12 no.6
• /
• pp.1018-1023
• /
• 2009

This paper describes a reduction in the peaks of traction energy for metro railways in timetabling. We develope a mixed integer programming (MIP) model, which minimizes the number of trains running simultaneously. We suggest two approaches. In the first approach, we use the commercial MIP solver, CPLEX. In the second approach, we propose a heuristic algorithm. We apply both methods to the current daily timetable of the Korea Metropolitan Subway. We determine an optimal solution, which results in an improvement of approximately 25% over the current timetable.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.9
• /
• pp.846-852
• /
• 2013

In this paper, the authors propose a new approach to control problem of the marine vessels which are moored or controlled by actuators. The vessel control problem in the specified area is called a DPS (Dynamic Positioning System). The main objective of this paper is to obtain more useful control design method for DPS. In this problem, a complicate fact is control allocation which is a numerical method for distributing the control signal to the controlled system. For this, many results have been given and verified by other researchers using two individual processes. It means that the controller design and control allocation design process are carried out individually. In this paper, the authors give more sophisticated design solution on this issue. In which the controller design and control allocation problem are unified by a robust controller design problem. In other word, the stability of the closed-loop system, control performance and allocation problem are unified by an LMI (Linear Matrix Inequality) constraint based on $H_2/H_{\infty}$ mixed design framework. The usefulness of proposed approach is verified by simulation with a supply vessel model and found works well.

• Journal of Arbitration Studies
• /
• v.24 no.3
• /
• pp.1-31
• /
• 2014

The foundation of the arbitration jurisdiction is the arbitration agreement entered into by the parties to a contract. Usually, only the signatory parties to a contract and the disputes arising from a contract that includes an arbitration clause or to which the arbitration clause relates are the ones that can be submitted to arbitration. This article discusses some of the arguments for extending the arbitration clause in complex arbitrations, that is, in those cases where there are more than two parties, more than two contracts or more than two parties and contracts. Particularly, this paper addresses multiple contract arbitration when the contracts are related. One of the arguments used by the arbitral tribunal for the extension of jurisdiction is the existence of a link between the contracts. Additional arguments include implied consent, participation in the negotiation and performance of a contract and good faith. The article also discusses some of the typical cases of linked contracts in many civil law countries, such as subcontracts, third party beneficiaries and standard terms of contracts, from which arbitral jurisdictions problems may arise. Finally, special attention is given to Article 14 of the 2008 Peruvian Arbitration Law as the first provision in an arbitration law in Latin America that extends the arbitration agreement to non-signatory parties using for this a mixed approach.

• Steel and Composite Structures
• /
• v.22 no.5
• /
• pp.1163-1192
• /
• 2016

This paper presents the cost optimization of a composite I beam floor system, designed to be made from a reinforced concrete slab and steel I sections. The optimization was performed by the mixed-integer non-linear programming (MINLP) approach. For this purpose, a number of different optimization models were developed that enable different design possibilities such as welded or standard steel I sections, plastic or elastic cross-section resistances, and different positions of the neutral axes. An accurate economic objective function of the self-manufacturing costs was developed and subjected to design, resistance and deflection (in)equality constraints. Dimensioning constraints were defined in accordance with Eurocode 4. The Modified Outer-Approximation/Equality-Relaxation (OA/ER) algorithm was applied together with a two-phase MINLP strategy. A numerical example of the optimization of a composite I beam floor system, as presented at the end of this paper, demonstrates the applicability of the proposed approach. The optimal result includes the minimal produced costs of the structure, the optimal concrete and steel strengths, and dimensions.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.23 no.4
• /
• pp.893-898
• /
• 1996

The occlusal disharmonies resulted from labially protruded or malpositioned teeth can damage the periodontium and induce the non-inflammatory gingival recession. For these cases, a conservative approach was performed by improving oral hygiene and correcting the axial and positional status of the gingivally recessed teeth and removing the prematurely contacted areas. In some cases, rapid remission of tooth mobility and gradual decrease of gingival recession was observed just after start of treatment. In cases of gingival recession in permanent lower incisors of the children with mixed dentition, the treatment of choice is non-surgical conservative approaches. In cases when the gingival inflammation can be controlled through reinforcing the oral hygiene, when attached gingiva have a potential to increase in width through growth (not more than 1 year after eruption or not yet arrived at adult level), and when the recession can be corrected by moving the teeth from labial cortical plate through orthodontic treatment, the conservative measures would be the first choice. On the contrary, when recession has exceeded beyond the level of CEJ, when the gingival inflammation existed with the cause of poor oral hygiene, when the attached gingiva have little potential to increase (for example, more than 8 years after eruption), and when the conservative measures yielded no benefit after 4-8 weeks of treatment, the surgical approaches should be sought.

• Journal of Information Processing Systems
• /
• v.13 no.5
• /
• pp.1089-1102
• /
• 2017

In software systems, it has been observed that a fault is often caused by an interaction between a small number of input parameters. Even for moderately sized software systems, exhaustive testing is practically impossible to achieve. This is either due to time or cost constraints. Combinatorial (t-way) testing provides a technique to select a subset of exhaustive test cases covering all of the t-way interactions, without much of a loss to the fault detection capability. In this paper, an approach is proposed to generate 2-way (pairwise) test sets using genetic algorithms. The performance of the algorithm is improved by creating an initial solution using the overlap coefficient (a similarity matrix). Two mutation strategies have also been modified to improve their efficiency. Furthermore, the mutation operator is improved by using a combination of three mutation strategies. A comparative survey of the techniques to generate t-way test sets using genetic algorithms was also conducted. It has been shown experimentally that the proposed approach generates faster results by achieving higher percentage coverage in a fewer number of generations. Additionally, the size of the mixed covering arrays was reduced in one of the six benchmark problems examined.

• Asia pacific journal of information systems
• /
• v.33 no.3
• /
• pp.541-572
• /
• 2023

Amazon Go is a cashierless convenience store concept, which is seen as a disruption in the grocery retail segment. Although Amazon Go has the ability to disrupt the retail segment, there are speculations on how Amazon Go will be perceived by users. Existing studies have not utilized user-generated content to understand the factors that affect customer behaviour in case of Amazon Go. Additionally, in case of phygital retail, studies have not attempted at understanding the effect of emotions and gratifications on user behaviour. To address the gap of exploring user perspectives based on their experience, we have examined the impact of gratifications and emotions on the acceptance of phygital retail using user-generated-content. A mixed-method approach has been utilized using only user-generated content. Utilizing topic-modelling based content analysis and emotion analysis on 30 articles related to Amazon Go, we found themes like, convenience, technology, experience, personalization, enjoyment and emotions like, bad, good, annoyance, success. In the empirical analysis, we have utilized 522 reviews about Amazon Go from the cognition and emotion theory stance, and found that hedonic gratifications have a positive impact on challenge emotions. We also found a significant impact of emotions on customer's favourite behaviour.

• Asia pacific journal of information systems
• /
• v.32 no.1
• /
• pp.92-124
• /
• 2022

Providing services using kiosks is actively carried out between suppliers and consumers. These service processes have recently begun to play a dominant role in transactions. However, previous self-service technology (SST) studies or kiosks have not fully reflected the changing environment surrounding these different technologies. To cover the updated business environments, we combined qualitative and quantitative research methods. Through qualitative research and a review of previous studies, the variables emphasized as motivations and constraints for kiosks use and those that can be newly illuminated were selected for this study. We then applied the variables to the research model to assess their influence. In terms of the motivations for using kiosks, the results suggest that perceived usefulness and compatibility as service quality, forced use, and perceived service providers' efficiency as provider polices, absorptive capacity, and habit as an individual characteristic and social influence as a subjective norm have a significant effect on the attitude toward kiosks. In terms of constraints, difficult to use and need for interaction predicts the attitude toward kiosks. Attitude toward kiosks, perceived behavioral control, and social influence are directly related to the intention to use kiosks. Lastly, intention to use kiosks plays a significant role as an antecedent of revisit intention. Using these empirical results, we propose both academic and practical implications for future kiosks use.

• Journal of Environmental Science International
• /
• v.7 no.6
• /
• pp.745-751
• /
• 1998

The well-mixed room model has been traditionally used to predict the concentrations of contaminants in indoor environments. However, this is inappropriate because the flow fields in many indoor environments distribute contaminants non-uniformly, due to imperfect air mixing. Thus, some means used to describe an imperfectly mixed room are needed. The simplest model that accounts for imperfect air mixing is a two-zone model. Therefore, this study on development of computer program far the two-zone model is carried out to propose techniques of estimating the concentration of contaminants in the room. To do this, an important consideration is to divide a room into two-zone, i.e. the lower and upper zone assuming that the air and contaminants are well mixed within each zone. And between the zones the air recirculation is characterized through the air exchange parameter. By this basic assumption, the equations for the conservation of mass are derived for each zone. These equations are solved by using the computational technique. The language used to develope the program is a VISUAL BASIC. The value of air exchange coefficient($f_12$) is the most difficult to forecast when the concentrations of contaminants in an imperfectly mixed room are estimated by the two-zone model. But, as the value of $f_12$ increases, the air exchange between each zone increases. When the value of $f_12$ is approximately 15, the concentrations in both zone approach each other, and the entire room may be approximately treated as a single well-mixed room. Therefore, this study is available for designing of the ventilation to improve the air quality of indoor environments. Also, the two-zone model produces the theoretical base which may be extended to the theory for the multi-zone model, that will be contributed to estimate the air pollution in large enclosures, such as shopping malls, atria buildings, atria terminals, and covered sports stadia.