• 환경위생공학
• /
• 제14권4호
• /
• pp.150-157
• /
• 1999

According to the fact that Macbansuk and clay are very porous, we produced combined adsorbent and we investigated the removing capacity of adsorbent to toxic heavy metal (Pb, Cu) in the single and mixed solution.Then the experimental parametars were pH, reaction time and amount of adsorbent. And we studied possibility of adsorbent by applying to the Freundlich isotherm. As raising the pH of single and mixed solution in range 2~5, the maximum adsorption capability was investigated in range 3~4. When Cu and Pb were applied to Freundlich isotherm, l/n were 0.291 and 0.513 respectively. In the case of mixed solution with both, l/n value was 0.614. In this study, we concluded that the combined adsorbent treated toxic heavy metal is possible under 100 ppm of its concentration.

• Journal of Microbiology and Biotechnology
• /
• 제9권3호
• /
• pp.292-296
• /
• 1999

The high density mixed mode adsorbent known by the trade name of Mimo-AD was used to purify lysozyme directly from the hen egg white (HEW). The homogenized hen egg white was treated with the adsorbent in a stirred vessel for lysozyme adsorption, and then the adsorbent, easily separated from the HEW by sedimentation, was packed into a column. The remaining HEW and contaminant proteins were removed by washing with pH 11 distilled water in an expanded-bed state, and subsequently the elution was performed with pH 12 distilled water in a packed-bed state. By this simple and rapid adsorption, washing, and elution procedure, lysozyme was purified to＞95％ with an overall recovery yield of 66％. This process offers a great potential for industrial application by allowing the extraction of lysozyme while retaining the commercial value of HEW.

• 한국염색가공학회지
• /
• 제18권5호
• /
• pp.48-52
• /
• 2006

A mixed adsorbent prepared by pyrolysing a mixture of carbon and flyash in 1:1 ratio was tested for its deceleration ability for three different classes of dyes, namely Astrazone Blue FRR(C.I. Basic Blue 69), Teflon Blue ANL(C.I. Acid Slue 125) and Verofix Red(Reactive Red 3GL). Equilibrium investigations were carried out at the optimum conditions obtained in the previous studies. The equilibrium data fitted reasonably well to both the Freundlich and Langmuir adsorption models. However the Langmuir model was more appropriate to describe the adsorption behavior of the dyes to the hybrid absorbent system compared with the Freundlich model. The mixed adsorbent cm be an low-cost alternative to activated carbons.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제10권2호
• /
• pp.128-135
• /
• 2005

Mixed-mode hydrophobic/ionic matrices exhibit a salt-tolerant property for adsorbing target protein from high-ionic strength feedstock, which allows the application of undiluted feedstock via an expanded bed process. In the present work, a new type of mixed-mode adsorbent designed for expanded bed adsorption, Fastline $PRO^{\circledR}$, was challenged for the capture of nattokinase from the high ionic fermentation broth of Bacillus subtilis. Two important factors, pH and ion concentration, were investigated with regard to the performance of nattokinase ad-sorption. Under initial fermentation broth conditions (pH 6.6 and conductivity of 10 mS/cm) the adsorption capacity of nattokinase with Fastline PRO was high, with a maximum capacity of 5,350 U/mL adsorbent. The elution behaviors were investigated using packed bed adsorption experiments, which demonstrated that the effective desorption of nattokinase could be achieved by effecting a pH of 9.5. The biomass pulse response experiments were carried out in order to evaluate the biomass/adsorbent interactions between Bacillus subtilis cells and Fastline PRO, and to demonstrate a stable expanded bed in the feedstock containing Bacillus subtilis cells. Finally, an EBA process, utilizing mixed-mode Fastline PRO adsorbent, was optimized to capture nattokinase directly from the fermentation broth. The purification factor reached 12.3, thereby demonstrating the advantages of the mixed-mode EBA in enzyme separation.

• 한국염색가공학회지
• /
• 제18권5호
• /
• pp.42-47
• /
• 2006

A mixed adsorbent prepared by pyrolysing a mixture of carbon and flyash in 1:1 ratio was tested for its deceleration ability for three different classes of dyes namely, Astrazone Blue FRR(Basic Blue 69), Teflon flue ANL(Acid Blue 125) and Verofix Red(Reactive Red 3GL). Kinetic analyses were carried out at the optimum conditions obtained by the author in the previous studies. The data was fitted with three kinetic model equations. The results showed that the dye uptake mechanism followed the second-order rate expression.

• 공업화학
• /
• 제10권3호
• /
• pp.477-485
• /
• 1999

방사선 전조사법에 의하여 폴리프로필렌 부직포 상에 2,3-에폭시프로필메타크릴레이트 (GMA)를 공중합시킨 후 다양한 혼합용매 상에서 이미노디아세트산 (IDA)과 반응시킴으로서 고성능의 섬유상 금속 흡착제를 제조하였다. 그라프트 반응시의 그라프트율은 반응시간과 반응온도, 총 조사선량 및 선량율에 의존하는 것으로 나타났다. GMA가 그라프트된 폴리프로필렌 부직포 상에 이미노디아세트산을 도입하는 아민화반응에 있어서 다양한 혼합용매가 반응성에 미치는 영향을 고찰한 결과 디메틸술폭시드 (DMSO)와 물을 적정비율로 혼합한 혼합용매 상에서 가장 높은 반응성을 가지는 것으로 나타났으며, 물만을 사용하는 경우 아민화반응은 전혀 진행되지 않았다. 이온농도 100 ppm으로 조재된 중금속 용액에 제조된 아민화 흡착제를 일정시간 담그어 금속이온에 대한 흡착성능을 살펴보았는데, 각각의 경우에 대하여 흡착효율을 다음의 순서를 따랐다: 납>코발트>철.

• 실내환경 및 냄새 학회지
• /
• 제17권4호
• /
• pp.372-380
• /
• 2018

To abate the problem of odor from restaurants, a hybrid adsorbent consisting of organic and inorganic materials was developed and evaluated using acetaldehyde as a model compound was deveioped and evaluated. Powders of activated carbon, bentonite, and calcium hydroxide were mixed and calcinated to form adsorbent structure. The surface area of the hybrid adsorbent was smaller than that of high-quality activated carbon, but its microscopic image showed that contours and pores were developed on its surface. To determine its adsorption capacity, both batch isotherm and continuous flow column experiments were performed, and these results were compared with those using commercially available activated carbon. The isotherm tests showed that the hybrid adsorbent had a capacity 40 times higher than that of the activated carbon. In addition, the column experiments revealed that breakthrough time of the hybrid adsorbent was 2.5 times longer than that of the activated carbon. These experimental results were fitted to numerical simulations by using a homogeneous surface diffusion model (HSDM); the model estimated that the hybrid adsorbent might be able to remove acetaldehyde at a concentration of 40 ppm for a 5-month period. Since various odor compounds are commonly emitted as a mixture when meat is barbecued, it is necessary to conduct a series of experiments and HSDM simulations under various conditions to obtain design parameters for a full-scale device using the hybrid adsorbent.

• 환경위생공학
• /
• 제16권3호
• /
• pp.104-110
• /
• 2001

NOx coming from combustion make photochemical smog and acid rain, cause chronic respiratory disease resulting in critical hazard to environment and human health. Most composition of NOx coming from combustion is NO and the remaining small amount of $NO_x$ is $NO_2$. Currently, many technologies are developed and used to control NO release. One of these technologies is control technology through use of the adsorbent. In this study, two methods were used to make the adsorbent and compared. KOH and ${\gamma}{\;}-alumina$ were mixed by using two methods. Then, the experimental conditions were as follows: the concentrations of KOH used were 1 mole, 0.5 mole, and 0.1 mole, respectively and the amount of ${\gamma}{\;}-alumina$$250^{\circ}C$. As a result, precipitation method, which is one of the production methods of the adsorbent, showed the most removal efficiency as KOH concentration as 1 mole and reaction temperature as $100^{\circ}C$ were used. This study shows 40 to 60% of micropores of ${\gamma}{\;}-alumina$ was lost by the reaction with KOH through the analysis of SEM and BET Finally, KOH is the most predominant factor to control the removal of NO rather than micropore of the adsorbent.

• 환경위생공학
• /
• 제15권3호
• /
• pp.44-49
• /
• 2000

The purpose of this research is to evaluate the adsorption capacity of casts for heavy metals. The casts were excreted by earthworm, Lumbricus rubellus, after having eaten the paper sludge. Various batch experiments on adsorption were performed to compare cast and activated carbon. The pH increase in solution due to extractives from cast was 1.3 and the cation exchange capacity which implies adsorption capacity for solubles is greater on activated carbon than on cast. According to the results of batch experiment, the removal rates of Pb, Cu, Cr, Zn using the activated carbon and casts as adsorbent were 98%, 93%, 94%, 89%, 82% and 95%, 90%, 88%,80%, 66%, respectivity, and this removal were achived less than 90 minutes. It can be said that casts is so good adsorbent as activated carbon is, although adsorption carbon was found to be some large than those of casts through Freundlich isotherm applied for adsorption of soluble. As a result on the experiment of isothermic adsorption from the mixed component solution in the batch, the order of preferable elements in heavy metal adsorption was found to be Pb＞Cd＞Cu＞Cr＞Zn on activated carbon, respectively.

• 한국환경독성학회:학술대회논문집
• /
• 한국환경독성학회 2003년도 추계국제학술대회
• /
• pp.175-175
• /
• 2003

Phthalocyanine, a water soluble porphyrin derivative and dye, is known to inhibit the mutagenic and carcinogenic actions of compounds having polycyclic structures, e.g. heterocyclic amines. There is evidence that this adsorbent effect shows by a complex formation between the porphyrin-like structure of phthalocyanine and the planar molecular surfaces of theses compounds. That phthalocyanine can form an insoluble material when mixed with chitosan, a polyglucosamine, and that the solid chitosan-phthalocyanine, named Eco-Blue, thus prepared can efficiently adsorb polycyclic mutagenic compounds. The adsorption was experimented by UV/VIS spectrometry. The adsorbent effects of mutagens and carcinogens was identified by Gas chromatography (GC) and Ames Test. The adsorbed polycyclic mutagens were elutable with buffer, but only to small extents. Chitosan-phthalocyanine may be expected to be useful as an adsorbent against polycyclic mutagens and carcinogens.