• Journal of The Korean Digital Architecture Interior Association
• /
• v.11 no.3
• /
• pp.35-42
• /
• 2011

The exterior system of buildings, which is the typical curtain wall, has been made with glass and metal. Theses materials, however, have weaknesses such as inadequate insulating quality, short durability, combustibility and toxic substance. On the other hand, Autoclaved Aerated Concrete(AAC) or Autoclaved Lightweight Concrete(ALC) possess the great energy efficiency and the superb insulating quality as substitute of existing exterior system materials. In this research, strength characteristics and bubble dispersion of hydrothermal synthesis process of AAC based on CaO/$SiO_2$(C/S) ratio are analyzed. C/S ratio is determinated and bubble distribution and compressive strength are studied through the test of varied water-to-solid mineral ratio(W/S). In hydrothermal synthesis program, final C/S ratio is determined as 0.7 consider of the manufacturing process and hydrothermal synthesis is done at $180^{\circ}C$ for 7 hours. The analysis shows slurry has about 2,300cP viscosity and 0.56 specific gravity therefore it is expected AAC has the appropriate facility in the manufacturing process and Hydrates of AAC's Expansion.

• Journal of Nutrition and Health
• /
• v.26 no.5
• /
• pp.524-531
• /
• 1993

In this experiment, we investigated the changes of erythrocyte feature and Ca concentration in rat fed the diet containing different common oils in Korea for different feeding periods(4 weeks or 12 weeks), using Korea sesame oil, perilla oil, rice bran oil and mixed oil. W-3/w-6 ratio of each group was 0.001, 1.44, 0.03 and 0.112, respectively. P/S ratio of each group was 9.64, 10.49, 5.58 and 1.68, respectively. Perilla oil(w-3 rich) increased w-3/w-6 ratio of erythrocyte membrane, decreased the amount of trapped Ca and inhibited the decrease of cell volume. These results indicate that in maybe increase erythroyte fluidity and deformability, and affect erythrocyte function. In conclusion, w-3 rich perilla oil affects erythrocyte feature.

• Culinary science and hospitality research
• /
• v.23 no.8
• /
• pp.163-172
• /
• 2017

In order to investigate the quality characteristics of Prunus persica Batsch var. davidiana Max. preserved in sugar, the quality characteristics were examined by dividing them into four groups: PS-A (P. persica preserved in sugar mixed with sucrose and oligosaccharides at a ratio of 100:0, w/w), PS-B (P. persica preserved in sugar mixed with sucrose and oligosaccharides at a ratio of 60:40, w/w), PS-C (P. persica preserved in sugar mixed with sucrose and oligosaccharides at a ratio of 40:60, w/w) and PS-D (P. persica preserved in sugar mixed with sucrose and oligosaccharides at a ratio of 0:100, w/w). The results were as follows: pH levels and soluble solid contents of PS-D sample were lower than those of the others, however total acidity value were higher. In case of Hunter's value, the 'L', 'a' and 'b' values of all samples were affected by addition of oligosaccharides. No great difference occurred among samples in reducing sugar contents. Organic acid content was significantly decreased with the lower addition of sucrose. The predominating organic acid components analyzed in all samples were lactic acid 156.15 g/100 g, tartaric acid 72.75 g/100 g and citric acid 32.90 g/100 g. The highest contents of total phenol and flavonoid, and DPPH and ABTS radical scavenging activity were $10.79{\pm}0.55mg\;GAE/mL$, $8.71{\pm}0.06mg\;CE/mL$ and 71.8%, 71.0% for PS-D, respectively. The results of this study indicated the use of oligosaccharides could increase the quality and antioxidant potentials of P. persica preserved in sugar.

• Journal of Nutrition and Health
• /
• v.26 no.5
• /
• pp.513-523
• /
• 1993

In this experiment, we investigated the hypolipidemic and antithrombotic effects of rats fed diets with different common oils in Korea for different feeding periods(4 weeks or 12 weeks), using Korean sesame oil, perilla oil, rice bran oil and mixed oil. W-3/w-6 ratio of each group was 0.001, 1.44, 0.03 and 0.112, respectively. P/S ratio of each group was 9.64, 10.49, 5.58 and 1.68, respectively. The result were as follows: 1) According to the age, body fat accumulation was increased. 2) Perilla oil(w-3 rich) decreased total lipid, triglyceride and total cholesterol, and increased HDL/total cholesterol ratio. 3) With regard to the compositono of platelet fatty acids, Perilla oil increased w-3/w-6 ratio of the platelet. Perilla oil lengthened bleeding time and decreased MDA(MalonDAdehyde) formation which determined in place of Thromboxane A2(TXA2) in platelet. This result can suggest that linoleic acid of perrilla oil seem to supress the conversion of linoleic acid to arachidonic acid(AA 20:4, w-6) and eicosapentaenoic acid(EPA, 20:5, w-3) trannnsformed from linolenic acid to suppress the conversion of arachidonic acid to TXA2. Since TXA2 is platelet-aggregating and vasoconstricting agent, the reduction of TXA2 tgeneration by platelet with increased linolenic acid intakes shows prologed bleeding time. In conclusion, w-3 rich perilla oil has strong hypolipidemic and antithrombotic effects by changing fatty acid profiles of the platelet.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1992.10a
• /
• pp.54-57
• /
• 1992

This report presents the survey findings on the proportioning of ready mixed, concrete mixtures. According to this report, the W/C ratio and S/A ratio, based upon the type 25-210-12, in mix proportion of ready mixed concrete are 53% and 45% respectively. The problems to be improved, coming out in this study, are (1)using the adequate quantity of cement (2) alternation of mix design cope with the change of kinds of aggregates (3)large standard error in the mix proportion.

• Journal of Korean Vacuum Science & Technology
• /
• v.4 no.4
• /
• pp.112-121
• /
• 2000

The paper investigates electrical discharge properties in neon gas mixed with xenon. The breakdown temperature T$\sub$b/ and voltage V$\sub$b/ are obtained in terms of the gas mixture ratio X. It is shown that the breakdown voltage decreases, reaches the minimum value at X=0.02 and then increases again, as the mixture ratio X increases from zero to unity. Therefore, mixing the neon gas with a few percent of xenon is the most beneficial to reduce the breakdown voltage. Plasma density at breakdown in neon gas mixed with xenon is described in terms of the gas mixture ratio. The optimum value of mixture ratio for highest plasma density is found to be Xm=0.03. A preliminary experiment of AC-PDP is carried out for neon gas mixed with a few percent of xenon to verify some of the theoretical models. The experimental data agree qualitatively well with theoretical predictions.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.1
• /
• pp.1-7
• /
• 2018

This study examined the effect of binder-to-soil ratio(B/S) and water-to-binder ratio(W/B) on the flow and compressive strength development of soil concrete using high-volume supplementary cementitious materials. As a partial replacement of ordinary portland cement, 10% by-pass dust, 40% ground granulated blast-furnace slag, and 25% circulating fluidized bed combustion fly ash were determined in the preliminary tests. Using the low-cement binder incorporated with clay soil or sandy soil, a total of 18 soil concrete mixtures was prepared. The flow of the soil concrete tended to increase with the increase in W/B and B/S, regardless of the type of soils. The compressive strength was commonly higher in sandy soil concrete than in clay soil concrete with the same mixture condition. Considering the high-workability and compressive strength development, it could be recommended for low-cement soil concrete to be mixed under the following condition: B/S of 0.35 and W/B of 175%.

• Applied Chemistry for Engineering
• /
• v.34 no.3
• /
• pp.299-306
• /
• 2023

In this study, the O/W emulsification processes with the natural surfactants that were extracted from Medicago sativa L. and Sapindus saponaria L. as emulsifiers were optimized using the central composite design-response surface methodology (CCD-RSM). Herein, independent parameters were the amounts of mixed emulsifiers, the mixing ratio of natural emulsifiers (soapberry saponin/alfalfa saponin), and the emulsification time, whereas the reaction parameters were the emulsion stability index (ESI), mean droplet size (MDS), and antioxidant activity (DPPH radical scanvenging activity). Through basic experiments, the ranges of operation variables for the amount of mixed emulsifiers, the mixing ratio of natural emulsifiers, and the emulsification time were 12~14 wt%, 30~70%, and 20~30 min, respectively. The optimum operation variables deduced from CCD-RSM for the amount of mixed emulsifiers, the mixing ratio of natural emulsifiers, and the emulsification time were 13.2 wt%, 44.2%, and 25.8 min, respectively. Under these optimal conditions, the expected values of the ESI, MDS, and antioxidant activity were 88.7%, 815.5 nm, and 38.7%, respectively. And, the measured values of the ESI, MDS, and antioxidant activity were 90.6%, 830.2 nm, and 39.6%, respectively, and the average experimental error for validating the accuracy was about 2.1%. Therefore, it was possible to design an optimization process for evaluating the O/W emulsion process using CCD-RSM.

• Transactions of Materials Processing
• /
• v.27 no.1
• /
• pp.5-11
• /
• 2018

Direct energy deposition (DED) technique uses a laser heat source to deposit a metal layer on a substrate. Many researchers have used the DED technique to study the hardfacing of molds and dies. The aim of this study is to obtain high surface hardness and a sound bonding between the AISI M4 deposits and a substrate utilizing a mixed powder that contains M4 and AISI P21 powders. To prevent interfacial cracks between the M4 deposits and the substrate, the mixed powder is pre-deposited onto a JIS S45C substrate, before the deposition of M4 powders. Interfacial defects occurring between the deposits and substrate and changes in the microhardness of the intermediate layer were examined. Observations of the cross-sections of deposited specimens revealed that the interfacial cracks appeared in samples with one and two mixed layers regardless of the mixture ratio. However, the crack was removed by increasing the mixture ratio and the number of intermediate layers. Meanwhile, the microhardness in the mixed layer was found to decrease with increasing ratio of P21 powder in the mixture and that in the upper region of the deposited layers was approximately 800 HV, which was attributed to various alloying elements in the M4 powder.

• Journal of Power System Engineering
• /
• v.11 no.4
• /
• pp.56-64
• /
• 2007

A numerical simulation is carried out mixed convection in horizontal channel with a heat source from below of rectangular cavity. Finite volume method was employed for the discretization and PISO algorithm was used for calculating pressure term. The parameters governing the problem are the Reynolds number ($10^{-2}{\leq}Re{\leq}50$), the Rayleigh number ($10^3{\leq}Ra{\leq}2.06{\times}10^5$), the Prandtl number ($0.72{\leq}Pr{\leq}909$), the aspect ratio ($0.5{\leq}AR=W/H{\leq}2$) and the angle of inclination ($0^{\circ}{\theta}60^{\circ}$). Mean Nusselt number distributions were obtained and effect of Reynolds number, Rayleigh number and Prandtl number on mixed convection in the horizontal channel with rectangular cavity were investigated.