• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.1
• /
• pp.61-69
• /
• 2015

The objective of this study is to experimentally investigate the mixed flow behaviors and oxygen transfer characteristics of a vertical orifice ejector. The experimental apparatus consisted of an electric motor-pump, an orifice ejector, a circulation water tank, an air compressor, a high speed camera unit and control or measurement accessories. The mass ratio was calculated using the measured primary flow rate and suction air flow rate with experimental parameters. The visualization images of vertically injected mixed jet issuing from the orifice ejector were qualitatively analyzed. The volumetric oxygen transfer coefficient was calculated using the measured dissolved oxygen concentration. At a constant primary flow rate, the mass ratio and oxygen transfer coefficient increase with the air pressure of compressor. At a constant air pressure of the compressor, the mass ratio decreases and the oxygen transfer coefficient increases as the primary flow rate increases. The residence time and dispersion of fine air bubbles and the penetration of mixed flow were found to be important parameters for the oxygen transfer rate owing to the contact area and time of two phases.

• Journal of Environmental Science International
• /
• v.24 no.1
• /
• pp.55-64
• /
• 2015

The dry weight of mother plants' leaves had the highest increase rate in both NS (single-use) and NS+EM (mixed-use) mixed with NS 0.8 (customary use). In seafood amino acid fertilizer (SAF) application, the increase rate was highest in SAF solution at a 300-fold dilution. Mother plants' crown diameter, plant height, leaf length, leaf width, petiole length and leaf number showed the greatest growth amount when NS 0.8 (customary use) was mixed to NS (single-use) or NS+EM (mixed-use) solution. The growth was highest in SAF solution diluted 300 folds, but lowest in SAF solution diluted 100 folds. Of all inorganic nutrients, excluding sulfur, total amount of nitrogen, available phosphorus, potassium, calcium and magnesium had the highest increase rate in both NS (single-use) and NS+EM (mixed-use) with the treatment of NS 0.8 (customary use). Total nitrogen, in particular, was increased by 3.1% in NS 0.4, 6.0% in NS 0.8, and 4.5% in NS 0.8 with the application of NS+EM at a 500-fold dilution compared to NS alone. Total nitrogen amount showed the highest increase rate in SAF solution diluted 300 folds. Total nitrogen, available phosphorus, calcium, magnesium and EC in soils applied with culture solutions (NS, NS+EM) had increasing tendencies after fertilizer application. The results were comparable to those of SAF treatment. The increase rate of each inorganic nutrient composition declined in soils applied with NS+EM solution diluted 500 folds compared to NS alone.

• Journal of Welding and Joining
• /
• v.19 no.5
• /
• pp.481-485
• /
• 2001

Laser cladding processing allows rapid transfer of heat to the material being processed with minimum conduction into base metal. The effect of $CO_2$ laser cladding with high viscosity mixed powders was investigated. High viscosity mixed powder consists of bronze powder and flux that is used at a high temperature condition. The mixed powder has a high viscosity that it can be easily pasted over a curved or slope substrate. The device for mixed powder was designed and manufactured. It consists of the high viscosity mixed powder feeding system, the preheating system and the shielding gas system which prevents the clad layer from being oxidized. The results of experiment indicated that the feed rate of high viscosity mixed powder was important for later cladding with mixed powder feeding. The high viscosity mixed powder and substrate must be preheated to prevent porosity from breaking at the clad layer. The experimental result shows that the high viscosity mixed can be applied for laser cladding process.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.2E
• /
• pp.24-30
• /
• 1999

In this paper, we propose a weighting dependent mixed source model (WD-MSM) coder that is an improved version of a CELP-based mixed source model (C-MSM) coder. The coder classifies speech segments into three types : voiced, unvoiced and mixed. The excitation for a voiced frame is an adaptive source, and the excitation for an unvoiced frame is a stochastic source. The coder has a modified mixed source for a mixed frame. We apply different weighting functions for three classes. Simulation results show that the proposed coder at 4 kbits/s yields very good performance both subjectively and objectively.

• Research in Plant Disease
• /
• v.20 no.2
• /
• pp.95-100
• /
• 2014

This research was performed to examine the effects of mixed espil and copper hydroxide for powdery mildew prevention on cucumber, tomato and pepper. On prevention effect for powdery mildew on cucumber, results revealed that mixed espil and copper hydroxide with a ratio of 4 : 1, disease incidence rate was 18.9% and prevention effect was 69.9%. Another treatment with a ratio of 8 : 1 showed an disease incidence rate of 18.1% and prevention effect of 71.1%, thus, showed great effectiveness. For powdery mildew on tomato, espil and copper hydroxide were mixed using the ratio 4 : 1, results showed an disease incidence rate of 12.4% and prevention effect of 85.3%. Treatment using the ratio of 8 : 1, results showed an disease incidence rate of 14.3% and prevention effect of 83.0%, thus, showed great effectiveness. For powdery mildew on redpepper, espil and copper hydroxide were mixed using the ratio of 4 : 1 with results showed disease incidence rate of 17.7% and prevention effect of 83.0%. From the results, this treatment is the most effective with the lowest attack rate and highest prevention effect. Deducing from the study, it was found out that using mixed espil and copper hydroxide using the ratios 4 : 1 or 8 : 1 are the most effective method for powdery mildew prevention. Mixed ratio of 4 : 1 or 8 : 1 was most effective for preventing powdery mildew on cucumber and tomato, while the espil and copper hydroxide ratio of 4 : 1 was the most effective method for powdery mildew prevention on pepper.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.04a
• /
• pp.142-147
• /
• 1995

In this study, styrene-maleic anhydride copolymer (SMA) was synthesized from styrene and maleic anhydride and further reacted with sulfuric acid to obtain water-soluble SMA and the flow and strength tests of cement mortar mixed with copolymers were carried out to evaluate the capability of copolymers as high range water reducer for the concrete. It was found from flow experiment that the fluidity of cement mortar mixed with sulfonated SMA (SSMA) was larger than that miced with aminophenol-substituted SSMA (SmSMA). The decreasing rate of the flow of cement mortar mixed with SSMA and SmSMA was decreasing rate of the flow of cement mortar mixed with SSMA and SmSMA was significantly lower than that mixed with naphthalene condensate (NSC). The compressive strength of the hardened cement mortars containing 0.5% copolymers after 28 days curing was examined. The compressive strength of hardened cement mortar containing SSMA and SmSMA was increased up to 32% and 13%, respectively, when compared to the plain. As the results, the copolymers (SSMA and SmSMA) used in this study are greatly expected as a good high range water reducers for the concrete.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.853-858
• /
• 2001

Generally, mixed materials of LDPE, EVA and foaming agent are manufactured by crosslinking foaming or chemical foaming process. Above materials were used in a microcellular foaming injection molding process. Influence of each factor such as injection type, temperature of barrel, rate of mixed materials and contents of foaming agent was estimated by DOE(Design of Experiments). As a result of experiments, injection type and rate of LDPE, EVA have an influence on foaming rate. This data can be used in field of application of LDPE and EVA.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.2 no.3
• /
• pp.62-68
• /
• 2003

In this study, an experimental work was performed to mold tensile specimens by using the injection molding machine. Melt temperature, mold temperature and the mixed rate of recycled resin were selected as processing parameters for studing the effect of those condition on the shrinkage and weight of molded parts. As a result, the shrinkage was increased with the higher mold and melt temperature and It was more senstive to the change of mold temperature. On the other hand, the weight of molded parts was decreased with the increment of mold and melt temperature.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.7
• /
• pp.1037-1043
• /
• 2005

Kinetic study on the cleavage of N-methylphthalamic acid (NMPA) in mixed acidic aqueous-acetonitrile solvent reveals the formation of both phthalic anhydride (PAn) (through O-cyclization) and N-methylphthalimide (NMPT) (through N-cyclization). The formation of NMPT varies from $\sim$20% to $\sim$3% with the increase in the content of acetonitrile from 2 to 70% v/v. Pseudo first-order rate constants for the formation of PAn are more than 4-fold larger than those for the formation of NMPT at 2% v/v $CH_3CN$ in mixed aqueous solvents. Pseudo first-order rate constants for alkaline hydrolysis of NMPT reveal a nonlinear decrease with increase in the content of $CH_3CN$ in mixed aqueous solvents.

• Phonetics and Speech Sciences
• /
• v.10 no.3
• /
• pp.19-29
• /
• 2018

We propose to use independent component analysis (ICA) and deep neural network (DNN) to detect music sections in broadcast drama contents. Drama contents mainly comprise silence, noise, speech, music, and mixed (speech+music) sections. The silence section is detected by signal activity detection. To detect the music section, we train noise, speech, music, and mixed models with DNN. In computer experiments, we used the MUSAN corpus for training the acoustic model, and conducted an experiment using 3 hours' worth of Korean drama contents. As the mixed section includes music signals, it was regarded as a music section. The segmentation error rate (SER) of music section detection was observed to be 19.0%. In addition, when stereo mixed signals were separated into music signals using ICA, the SER was reduced to 11.8%.