• Journal of Microbiology and Biotechnology
• /
• v.18 no.6
• /
• pp.1130-1135
• /
• 2008

The effect of pH on anaerobic hydrogen production was investigated under various pH conditions ranging from pH 3 to 10. When the modified Gompertz equation was applied to the statistical analysis of the experimental data, the hydrogen production potential and specific hydrogen production rate at pH 5 were 1,182 ml and 112.5 ml/g biomass-h, respectively. In this experiment, the maximum theoretical hydrogen conversion ratio was 22.56%. The Haldane equation model was used to find the optimum pH for hydrogen production and the maximum specific hydrogen production rate. The optimum pH predicted by this model is 5.5 and the maximum specific hydrogen production rate is 119.6 ml/g VSS-h. These data fit well with the experimented data($r^2=0.98$).

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.242-247
• /
• 2009

The present study has been conducted to reduce the cold air drying rate. According to the cold air drying method, the quality-excellent product could be made and there would be little change of color, taste and smell. As compared with the hot air drying, the cold air drying equipment has the superior dehumidification in a constant drying zone. However, in a falling drying zone that equipment is not energy-efficient because the drying period could be longer by the dehumidificated.

• Journal of Korean Academy of Nursing
• /
• v.39 no.2
• /
• pp.270-278
• /
• 2009

Purpose: This study was performed to find out the effects of lidocaine or 8.4% sodium bicarbonate mixed with rocuronium on mean arterial pressure, heart rate and withdrawal movement. Methods: Data collection was performed from December 15, 2006 through May 31, 2007. Seventy-five patients with American Society Anesthesiologist (ASA) physical status I & II, under general anesthesia, were randomly assigned to 1 of 3 groups: R group (RG) received rocuronium 0.6 mg/kg; RL group (RLG), rocuronium 0.6 mg/kg mixed with 2 mL of 2% lidocaine; RS group (RSG), rocuronium 0.6 mg/kg with the same volume of 8.4% sodium bicarbonate. Mean arterial pressure, heart rate and withdrawal movement were observed from its injection until 5 min after endotracheal intubation. Results: The incidence of withdrawal movement with its corresponding injections was 72%, 40% and 4% in RG, RLG and RSG, respectively (p<.001). Score of withdrawal movement was the lowest in RSG of all groups (p<.001). While mean arterial pressure (p=.011) in RSG decreased significantly, and heart rate (p=.003) in RG increased more with its injection than before induction of anesthesia. Conclusion: Administration of the equivalent volume of 8.4% sodium bicarbonate with rocuronium is more effective than that of lidocaine with rocuronium compared with rocuronium only, in preventing withdrawal movement and in stabilizing mean arterial pressure and heart rate.

• Korean Journal of Metals and Materials
• /
• v.48 no.4
• /
• pp.277-288
• /
• 2010

The hot corrosion properties of heat-resistant steels were investigated in an oxidation atmosphere including artificial ash and sulfur dioxide. The heat-resistant steels of T22, T92, T122, T347HFG, Super304H and HR3C were evaluated at 620, 670 and $720^{\circ}C$ for 400 hours. The relationship between the corrosion rate and the temperature followed a bell-shaped curve with a peak rate at around $670^{\circ}C$. The corrosion rates showed a decreasing tendency as the chrome contents of these steels increased from 2.15 wt.% to 24.5 wt.%, and austenitic steels had a lower corrosion rate than ferritic steels. Sulfidation by $SO_2$ as well as molten salt corrosion also had an effect on the total corrosion rate, especially showing an increase in the corrosion rate in ferritic steels. Regardless of the chrome content in the steels and irrespective of the test temperature, the corrosion scale was composed of an outer oxide and an artificial ash mixed layer, a middle oxide layer and inner sulfide, and a mixed oxide layer. As the chrome content increased, the proportion of chrome oxide in the corrosion scale increased. Before spalling of the corrosion scale, voids and cracks were initiated in the sulfide and the mixed oxide layer or at the interface with the substrate.

• Journal of the Korean Dietetic Association
• /
• v.15 no.2
• /
• pp.179-187
• /
• 2009

In this study, we examined whether the glycemic index (GI) values of boiled white rice (GI=86) and boiled white rice mixed with grains (GI=58) could influence the total energy intake and satiety rate of a rice-based diet. Thirty adult females participated in this study, in which they ate boiled white rice, or boiled white rice mixed with grains, along with side dishes for lunch, and then ate the same white rice diet for dinner in the lab once a week for 2 weeks. There was no significant difference in the visual analogue scales for taste between the two diets. Although there were no differences between the subjects' energy intakes for side dishes, the total energy consumed from the boiled white rice mixed with grains diet (520.5 kcal) was significantly (p<0.001) lower than that consumed from the boiled white rice diet (560.2 kcal). For dinner, the subjects consumed significantly (p<0.001) lower calories when they had eaten the boiled white rice mixed with grains diet for lunch as compared to the boiled white rice diet. In addition, the subjects reported significantly (p<0.01, p<0.001) higher satiety rates after consuming the boiled white rice mixed with grains diet compared to the boiled white rice diet, despite consuming lower calories. In conclusion, these results indicate that consuming low GI rice such as boiled white rice mixed with grains substituted for boiled white rice, may be a useful strategy for weight loss and weight management since individuals will consume less energy without experiencing a reduction in satiety.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.6
• /
• pp.510-521
• /
• 2002

MBE (multi-band excitation) coder can achieve high qualify synthetic speech below 4.0 kbps. There are, however, significant differences of the fine structure between the original spectrum and the synthetic spectrum. They are mainly due to the exclusive partition of voiced and unvoiced regions in frequency domain and the decision procedure based on the experimental threshold. This paper proposes MMBE (mixed multi-band excitation) speech model to overcome drawbacks of a MBE coder. In addition, two analysis methods, which do not need my decision procedure based on a threshold, are presented. Both voiced and unvoiced components can be mixed over all the frequency axis in the MMBE speech model. To illustrate the potential of the proposed speech model, we develop a 2.6 kbps MMBE coder and compare it with a 2.9 kbps MBE coder by both objective and subjective methods. The results have shown that the proposed coder has a better performance even at a lower bit-rate compared with the MBE coder.

• Korean Journal of Materials Research
• /
• v.28 no.4
• /
• pp.241-246
• /
• 2018

$TaN_x$ film is grown by plasma enhanced atomic layer deposition (PEALD) using t-butylimido tris(dimethylamido) tantalum as a metalorganic source with various reactive gas species, such as $N_2+H_2$ mixed gas, $NH_3$, and $H_2$. Although the pulse sequence and duration are the same, aspects of the film growth rate, microstructure, crystallinity, and electrical resistivity are quite different according to the reactive gas. Crystallized and relatively conductive film with a higher growth rate is acquired using $NH_3$ as a reactive gas while amorphous and resistive film with a lower growth rate is achieved using $N_2+H_2$ mixed gas. To examine the relationship between the chemical properties and resistivity of the film, X-ray photoelectron spectroscopy (XPS) is conducted on the ALD-grown $TaN_x$ film with $N_2+H_2$ mixed gas, $NH_3$, and $H_2$. For a comparison, reactive sputter-grown $TaN_x$ film with $N_2$ is also studied. The results reveal that ALD-grown $TaN_x$ films with $NH_3$ and $H_2$ include a metallic Ta-N bond, which results in the film's higher conductivity. Meanwhile, ALD-grown $TaN_x$ film with a $N_2+H_2$ mixed gas or sputtergrown $TaN_x$ film with $N_2$ gas mainly contains a semiconducting $Ta_3N_5$ bond. Such a different portion of Ta-N and $Ta_3N_5$ bond determins the resistivity of the film. Reaction mechanisms are considered by means of the chemistry of the Ta precursor and reactive gas species.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.19 no.1
• /
• pp.1-11
• /
• 2016

Currently, urban green space is disappearing due to urbanization, industrialization and various environmental problems including the disruption of the ecology in urban areas. To solve such problems and increase urban green area, roof greening has been suggested as an alternative. Through observing the responses of three plant species (Mukdenia rossii, Dianthus chinensis, and Pachysandra terminalis) plantrd on the soil mixed with Geohumus, this study investigated the effect of Gehumus on soil water content and plant survival. Soil water content of the rooftop soils has been increased when mixed with Geohumus. The responses were proportional to the amount of Geohumus in the mixture. Geohumus exerted a stronger influence on raising soil moisture content for soil A which had lower water-holding capacity. The stress responses of the plants varied in relation to the amount of Geohumus and soil moisture content. The stress response was lowest for Dianthus chinensis and increased in the order of Mukdenia rossii and Pachysandra terminalis. With the highest plant stress, Pachysandra terminalis showed the lowest survival rate among the three species. Without irrigation, the plants survived only for six weeks on green roofs. The survival rate differed depending on the amount of Geohumus mixed. The results of the experiment showed, with some exceptions, that Geohumus helped to improve soil water content, reduce plant stress, and extend plant survival period.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.68-69
• /
• 2005

BTO ($BaTiO_3$) thin film is one of the high dielectric materials for high-density dynamic random access memories (DRAMs) due to its relatively high dielectric constant. It is generally known that BTO film is difficult to be etched by plasma etching, but high etch rate with good selectivity to pattern mask was required. The problem of sidewall angle also still remained to be solved in plasma etching of BTO thin film. In this study, we first examined the patterning possibility of BTO film by chemical mechanical polishing (CMP) process instead of plasma etching. The sputtered BTO film on TEOS film as a stopper layer was polished by CMP process with the self-developed $BaTiO_3$- and $TiO_2$-mixed abrasives slurries (MAS), respectively. The removal rate of BTO thin film using the$ BaTiO_3$-mixed abrasive slurry ($BaTiO_3$-MAS) was higher than that using the $TiO_2$-mixed abrasive slurry ($TiO_2$-MAS) in the same concentrations. The maximum removal rate of BTO thin film was 848 nm/min with an addition of $BaTiO_3$ abrasive at the concentration of 3 wt%. The sufficient within-wafer non-uniformity (WIWNU%)below 5% was obtained in each abrasive at all concentrations. The surface morphology of polished BTO thin film was investigated by atomic force microscopy (AFM).

• Journal of The Korean Society of Agricultural Engineers
• /
• v.56 no.6
• /
• pp.85-91
• /
• 2014

In this study, the water quality purification of new medias which were NPS media, hyugato, mineral stone, charcoal for applying soil media of Integrated Management Practices (IMPs) of Low Impact Development (LID) were evaluated. The influent concentrations of COD, T-N, and T-P were 117.8 mg/L, 17.1 mg/L, and 2.062 mg/L, respectively. The infiltration capacities of NPS media, hyugoto, mineral stone, charcoal, and gravel were $7.1{\times}10m/s$, $7.3{\times}10^{-5}m/s$, $7.9{\times}10^{-5}m/s$, $6.0{\times}10^{-5}m/s$, respectively. All media meet criteria of infiltration capacity as surface soil layer at IMPs which is over $1.0{\times}10^{-5}m/s$. Maximum removal rates of COD, T-N, and T-P occurred at Charcoal with 98 % of COD removal rate, NPS with 78 % of T-N removal rate, and hyugato with 75 % fo T-P removal rate, respectively. For more high removal efficiency of all water quality item, the mixed media which is 4.5(NPS media): 1(charcoal) : 4.5 (hyugato) as volume ratio was evaluated. The infiltration capacity of mixed media was $7.9{\times}10^{-5}m/s$ and met the criteria of infiltration as surface soil layer. The water quality removal efficiencies of mixed media were very high with showing 70 % for COD, 85 % for T-N, and 71 % for T-P. The mixed media could purify the water quality of surface runoff and was recommended to used at the LID site of ground water quality problem.