• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.19-20
• /
• 2021

In order to reduce the emission of harmful substances that degrade indoor air quality, the Ministry of Environment strengthened the standards for the content of VOCs in paints to supply and sell eco-friendly paints. In this related study, an eco-friendly paint mixed with a powder-type absorbent material was prepared and its characteristics were reviewed. As the amount of powder-type absorbent material increased, the workability (viscosity, peeling, etc) decreased. Accordingly, this study aims to examine which particle size is suitable according to the particle size of the granular adsorbent while improving the problem of the powdery adsorbent by using the granular adsorbent. As an experimental plan, the particle size of granular activated clay is selected to be 0.250, 0.425, 0.710(mm), and the decrease rate of VOCs concentration and impact resistance are reviewed. As a result of the experiment, as the particle size of the granular activated clay increased, the decrease rate of the VOCs concentration increased and the impact resistance improved. Therefore, considering the problems that occur after actual painting, the particle size of granular activated clay of 0.425mm is suitable.

• 한국환경보건학회지
• /
• 제47권3호
• /
• pp.267-278
• /
• 2021

Objectives: Using atmospheric dispersion representative models (AERMOD and CALPUFF), the emissions characteristics of each model were compared and analyzed in ready-mixed concrete manufacturing facilities that generate a large amount of particulate matter (PM-10, PM-2.5). Methods: The target facilities were the ready-mixed concrete manufacturing facilities (Siheung RMC, Goyang RMC, Ganggin RMC) and modeling for each facility was performed by dividing it into construction and operation times. The predicted points for each target facility were selected as 8-12ea (Siheung RMC 10, Goyang RMC 8, and Gangjin RMC 12ea) based on an area within a two-kilometer radius of each project district. The terrain input data was SRTM-3 (January-December 2019). The meteorological input data was divided into surface weather and upper layer weather data, and weather data near the same facility as the target facility was used. The predicted results were presented as a 24-hour average concentration and an annual average concentration. Results: First, overall, CALPUFF showed a tendency to predict higher concentrations than AERMOD. Second, there was almost no difference in the concentration between the two models in non-complex terrain such as in mountainous areas, but in complex terrain, CALPUFF predicted higher concentrations than AERMOD. This is believed to be because CALPUFF better reflected topographic characteristics. Third, both CALPUFF and AERMOD predicted lower concentrations during operation (85.2-99.7%) than during construction, and annual average concentrations (76.4-99.9%) lower than those at 24 hours. Fourth, in the ready-mixed concrete manufacturing facility, PM-10 concentration (about 40 ㎍/m³) was predicted to be higher than PM-2.5 (about 24 ㎍/m³). Conclusions: In complex terrain such as mountainous areas, CALPUFF predicted higher concentrations than AERMOD, which is thought to be because CALPUFF better reflected topographic characteristics. In the future, it is recommended that CALPUFF be used in complex terrain and AERMOD be used in other areas to save modeling time. In a ready-mixed concrete facility, PM-10, which has a relatively large particle size, is generated more than PM-2.5 due to the raw materials used and manufacturing characteristics.

• Journal of the Korean Wood Science and Technology
• /
• 제4권1호
• /
• pp.33-37
• /
• 1976

본 연구(硏究)에서는 합판공장(合板工場) 및 목재공장(木材工場)이면 어디서나 나오는 톱밥을 효율적(效率的)으로 이용(利用)하고자 하는 목적(目的)으로 P.b.에 섞어 사용(使用)할 때 P.b.의 곡강도(曲强度), 흡수율, 함수율, 비중에 미치는 영향을 조사하여 분석(分析) 고찰하였다. 결과(結果) 및 고찰에 의해서 얻어진 본연구(本硏究)의 결론(結論)은 다음과 같다. 1) P.b.의 bending strength에 있어서 톱밥을 섞지 않은 것과 비교해서 5% 섞은 것 까지는 차(差)가 없으며 10%, 15%섞으면 곡강도가 떨어졌으며 20% 섞은 것은 현격한 차이(差異)가 생겼다. 2) Absorbility는 톱밥을 섞을 수록 증가하는 경향으로 나타났으며, 20% 섞은 경우는 현격한 증가가 생겼다. 3) 함수율과 비중(比重)은 각 구성간에 차이(差異)가 없었다. 분산(分散) 분석(分析)을 한 결과(結果) 유의성(有意性)이 없었다. 이상과 같이 톱밥을 P.b. 제조시(時)에 5% 정도 섞는 것은 P.b 의 질(質)에 별다른 영향을 주지 않는 것으로 나타났다.

• 한국전기전자재료학회논문지
• /
• 제21권1호
• /
• pp.63-67
• /
• 2008

The charged particle type display is a kind of electronic paper showing information images using positive and negative charged particles ($<10{\mu}m$). In this work we used yellow(-) and black(+) particles which are respectively addressed to the cells of a upper and a rear substrate by using electric field. Our independent addressing method has strong points compared to the mixed particle putting method. The packaging with two orthogonal substrates and the aging process is followed by addressing process. The panel is sequentially driven by matrix method for each 4-unit cells. Layers of particles are controlled by barrier ribs and must be addressed to minimum 2 layers.

• 대한기계학회논문집B
• /
• 제28권1호
• /
• pp.89-98
• /
• 2004

In this paper, we develope a dispersion model based on the Generalized Langevin Model. Thomson's well-mixed condition is the well known criterion to determine particle dispersion. But, it has 'non-uniqueness problem'. To resolve this, we adopt a turbulent model which is a new approach in this field of study. Our model was greatly simplified under the self-similarity condition, leaving model only two model constants $C_{0}$ and ${\gamma}$$_{5}$ that control the dispersion and spin which measures rotational property of the Lagrangian particle trajectory. We investigated the sign of spin as well as magnitude by using the Direct Numerical Simulation. Model calculations were performed on the neutrally stable boundary layer flow. We found that spin has weak effect on the particle dispersion but it shows the significant effect on the horizontal flux compared to the zero-spin model.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 추계 학술논문 발표대회
• /
• pp.121-122
• /
• 2016

Recently in the domestic construction industry, source depletion has resulted in instances of ready-mixed concrete companies using river sand or crushed sand with high fine particle content. But the use of such low-quality fine aggregate is known to cause concrete quality to decline and have negative effects. So this study analyzed how much of an impact changes in fine particle content have on cement mortar's engineering characteristics. As a result, the flow rate and air quantity, which are characteristics of unhardened mortar, were shown to decrease as fine particle content increased, and compression strength, a characteristic of light mortar, was shown to subtly increase as fine particle content decreased.

• 한국전기전자재료학회논문지
• /
• 제11권5호
• /
• pp.384-393
• /
• 1998

A mixed powder of electrolyte and matrix support materials with a proper proportion was used for the fabrication of an electrolyte matrix sheet. The purpose of this study is to reduce the large change in MCFC cell thickness occurring in the initial start-up period when separate sheets of electrolyte and support are used. A focus was put on how small the carbonate particles could be made. The particle size of the carbonate powder was controlled by ball milling and the distribution was measured using a particle size analyser. The thickness change was reduced to 20% by this approach, which could be compared to 27% observed in a conventional cell. The thickness changes of electrolyte matrix have linear relation sizes of carbonate powders.

• 대한방사선기술학회지:방사선기술과학
• /
• 제26권1호
• /
• pp.39-44
• /
• 2003

Sodium Carboxy Methyl Cellulse(이하 SCMC)와 $BaSO_4$의 특성분석을 통하여, 소장조영 검사에 효과적인 조영제의 W/V% 농도와 점도를 알아보고자 하였으며 이를 통한 소장질환의 미세한 병변 진단에 대한 효율성을 높이고자 실험하였다. 그 결과 100 KVp 고압촬영 방식에서 살펴 볼 때, 높은 투과율로 검사의 효율성이 증대되었다. 압박 촬영과 이중조영 촬영을 시행함에 있어, High Density바륨 사용으로 인한 광학 농도의 차이를 극복함으로서 High Contrast 영상을 얻을 수 있다. CMC-Na의 평균농도 0.625 W/V%으로 선예한 이미지를 얻을 수 있었으며, 적정한 점막 코팅과 검사시간도 단축시킬 수 있다. 결론적으로, F그룹 방식의 CMC-Na을 혼합한 황산바륨 조영제를 조제하여 사용해본 결과, 경구소장조영 검사에 대한 모든 조건에 만족할 만한 것으로 나타났다.

• Composites Research
• /
• 제25권6호
• /
• pp.172-177
• /
• 2012

저저항 Si-SiC 소결체 제조를 위해 ${\alpha}$-SiC에서 조성과 C의 양을 변화시키면서 반응소결 특성을 고찰하였다. 시료준비는 정수압으로 성형체를 제조하였고, 용융Si 반응소결을 통해 시험편을 준비하였다. 반응소결체의 미세구조, 기계적 특성 및 전기저항 분석 결과 용융Si과 반응 후 미립의 ${\beta}$-SiC가 생성되었고, 치밀한 소결체를 형성하였다. 미립 ${\beta}$-SiC 생성량은 카본 양 에 따라 증가하였다. 그리고 C함량 10wt%이내에서 기계 R전기저항특성은 입도조성 영향이 크고 카본 함량 10wt%이상에서는 상전이 반응의 영향이 큼을 알 수 있었다.

• The Korean Journal of Ceramics
• /
• 제2권4호
• /
• pp.226-230
• /
• 1996

A small amount of fine particle graphite was added to $\alpha$-SiC and $\beta$-SiC having certain particle distributions, and they were mixed clay and frit. After forming, they were sintered at 140$0^{\circ}C$ for 3 hours. Tribological properties of sintered $\alpha$-SiC-$\beta$-SiC-graphite-clay (frit) system showed that kinetic friction coefficient was 0.108, specific wear rate was 1.3${\times}10^-8\;mm^2$.$kgf^1$, and torque was 0.01kgf.cm at the wrench torque of 100 kgf.cm.