• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.3
• /
• pp.250-258
• /
• 2016

Until now, the construction material industry has been recognized as a typical environmental destruction industry. However, recently, in order to reduce $CO_2$ emission, the main cause of environmental problems, lots of studies have been done about recycling industrial by-products and construction wastes. Therefore, the purpose of this study is to confirm whether it is possible to use as an alternative material in cement production process as a part of the development of recycled cement using an inorganic construction waste. For this study, the inorganic construction wastes was collected and analyzed each chemical component by XRF(X-ray Fluorescene). Also, the inorganic construction wastes were combined based on the chemical component of the cement, to perform this analysis. As a result, when the inorganic construction wastes was properly combined, it is possible to consider the development of the recycled cement used the inorganic construction wastes.

• International Journal of Highway Engineering
• /
• v.13 no.2
• /
• pp.139-145
• /
• 2011

The practice of asphalt pavement recycling has grown rapidly over the decade, one of which is the cold in-place recycling with the foamed asphalt (CIR-foam) or the emulsified asphalt (CIR-emulsion). Particularly, in Iowa, the CIR has been widely used in rehabilitating the rural highways because it significantly increases the service life of the existing pavement. The CIR layer is typically overlaid by the hot mix asphalt (HMA) to protect it from water ingress and traffic load and obtain the required pavement structure and texture. Most public agencies have different curing requirements based on the number of curing days or the maximum moisture contents for the CIR before placing the overlay. The main objective of this study is to develop a moisture loss index that the public agency can use to monitor the moisture content of CIR layers in preparation for a timely placement of the wearing surface. First, the moisture contents were measured in the field using a portable time domain reflectometry (TDR) device. Second, the weather information in terms of rain fall, air temperature, humidity and wind speed was collected from the same location. Finally, a moisture loss index was developed as a function of initial moisture content, air temperature, humidity and wind speed. The developed moisture loss index based on the field measurements would help the public agency to determine an optimum timing of an overlay placement without continually measuring moisture conditions in the field.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.3
• /
• pp.143-146
• /
• 2009

Purpose: We use the centrifugation of refrigeration state in separation of blood serum, Anti-ds-DNA, Vitamin $B_{12}$/Folate and GAD-Ab assay. However, Cortisol urine and 25-Hydroxyvitamin $D_3$ ($25OHD_3$) are conducted centrifuge at room temperature. This is troublesome that change centrifugation temperature into room temperature due to using of most assays at cold temperature. Therefore when using centrifuge after extraction of Cortisol urine and $25OHD_3$, we conducted researches on effect of the centrifugation temperature in assay results. Materials and Methods: In Cortisol urine, add dichloromethane 1.0 mL in urine $500\;{\mu}L$, mix for 15 minutes, and then centrifuge for 8 minutes at 2600rpm. In $25OHD_3$ add acetonitrile 0.5 mL in serum $200\;{\mu}L$, and then centrifuge for 8 minutes at 2600rpm. Those experiments were conducted centrifuge at room temperature and $4^{\circ}C$. And experiments conducted immediately after centrifugation at $4^{\circ}C$ and standing for 20 minutes after centrifugation $4^{\circ}C$. Results: In Cortisol urine, room temperature result in 1.93, 2.18, 2.43, 9.45, 14.2 (${\mu}g/dL$). Experiments of performing immediately after centrifuge at $4^{\circ}C$ result in 1.8, 2.0, 2.3, 8.1, 13.7 (${\mu}g/dL$). Experiments of performing after 20 minutes result in 2.1, 2.1, 2.7, 9.95, 14.35 (${\mu}g/dL$). On the other hand, the $25OHD_3$ tests conducted at room temperature result in 7.13, 26.6, 35.8, 48.2, 74.8 (ng/dL). Experiments were conducted immediately by pipetting after $4^{\circ}C$ centrifugation result in 7.53, 30.9, 40.3, 61.5, 89.1 (ng/dL) as results are higher than experiments at room temperature. The experiments that conducted centrifuge at $4^{\circ}C$ and then left at room temperature for 20 minutes result in 7.40, 32.4, 41.3, 51.6, 85.6 (ng/dL). Conclusions: Experiments were conducted by using centrifuge at $4^{\circ}C$ are higher or lower than room temperature. The differences between results of standing for 20 minutes after centrifuge at $4^{\circ}C$ and those of centrifuge at room temperature are less than conducting immediately. It is concerned that experiments conducted immediately after centrifuge at $4^{\circ}C$ are incorrect, because tubes become dim due to temperature differences between $4^{\circ}C$ and room temperature. Therefore, it is desirable to centrifuge at room temperature as manual and we should pipet promptly without stopping.

• Journal of Preventive Medicine and Public Health
• /
• v.23 no.1 s.29
• /
• pp.11-21
• /
• 1990

This study refers to the problem of long-term inpatient flow in a general hospital. In this study, a queueing simulation model was developed for the two departments in the hospital with a homogeneous case mix and relatively many long-term inpatients in order to increase the turnover rate and hospital charges. Before the simulation n, the model was verified by the Kolmogorov-Smirnov test. The following results were generated by three alternative models of the special bed policies. 1. Alternative I : When long term inpatients were admitted to the wards belonging to departments A and B without transfer to other departments and special beds, the average turn-over rate decreased by 2-4% and the average hospital charges decreased by 70 million won. 2. Alternative II : When long-term inpatients were transferred to department C but the transfer of wards was determined by department C in order of clinical need, the average turnover rate increased by 4-13% but the average hospital charges decreased by 30 million won. This result was not greatly different from the present state. 3. Alternative III : When long-term inpatients were transferred to the special wards and department C simultaneously, the increase in the average turnover rate and hospital charges was equivalent to the increase of two beds in the special wards. When the special wards were allocated 16 beds, the average turnover rate of departments A and B increased by about 55% and 20% respectively. Also, the hospital charges increased by about 0.44 billion won. As a result, transfer to department C and the use of 16 beds in the special wards for long-term inpatients of departments A and B is expected to maximize the hospital revenue. However, as the above special bed policy can not increase the turnover rate above 60%, there is a need for a more comprehensive policy to further increase the rate. The development of an elaborate model should include the number of long-term inpatients in all clinical departments, the special wards system or an increase of hospital beds to handle admission needs, and the resources of the hospital by department. When the alternatives are evaluated, a cost-benefit analysis in addition to the turnover rate and the hospital charges should be considered.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.12
• /
• pp.1329-1336
• /
• 2007

This study was carried out to develop an efficient process abating high NO concentration. A hybrid process of selective catalytic reduction(SCR) and activated carbon fiber(ACF) adsorption was newly designed and tested. Used ACF in NO adsorption was regenerated by simultaneously applying heat and vacuum. The result of ACF regeneration was for superior in the desorption condition at $140^{\circ}C$ and vacuum 600 mmHg. A commercial catalyst was used at the conditions of reaction temperature at $300^{\circ}C$, $NH_3/NO$ mole ratio = 1.0 for SCR process. NO evolved from ACF regeneration reactor could be removed by SCR reactor up to 98%. But high concentration of NO was exhausted from SCR reactor for one minute when the flue gas of NO 300 ppm and deserted NO from ACF regeneration were simultaneously treated by the same SCR reactor. Therefore, it is necessary to use additional small sized SCR reactor or to increase $NH_3$ concentration for a short time along with NO concentration rather than to mix flue gas with the gas evolving from ACF regeneration at fixed $NH_3$ inlet concentration. The hybrid process of SCR and ACF showed high NO removal efficiency over 80% at any time courses. Through the repeated cycles, stable DeNOx efficiency was maintained, indicating that the hybrid process would be a good countermeasure to the spotaneously high NO concentration instead of increasing the SCR capacity.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.3
• /
• pp.495-504
• /
• 2000

This study discussed the optimal use of bentonite and cement for the compacted soil liner of landfill. Techniques employed in this optimization included permeability(by KSF 2322) and compressive strength(by KSF 2314). The optimal amount of these materials to the compacted soil liner was determined in accordance with a regulatory guideline of the government: that is, $k=1{\times}10^{-7}cm/sec$. The testing sods were CL(Clayey Soil) and SM(Sandy Soil), which were classified according to LSCS(Unifed Soil Classify System), The results showed that the optimal amounts of bentonite and cement to mix with the compacted CL soil liner were 5% of bentonite and 5% of cement : namely, $k=9.98{\times}10^{-8}cm/sec$ and ${\sigma}_{28}=1275kg/cm^2$. For the compacted SM soil liner. the optimal amount of bentonite was 15%, in conjunction with 5% of cement : namely, $k=9.86{\times}10^{-8}cm/sec$ and ${\sigma}_{28}=18.72kg/cm^2$. It was concluded that the compacted CL or SM soil liner, with containing the optimal amounts of bentonite and cement showed the acceptable permeability and the compressive strength, referring to a regulatory guideline of the government for construction of the landfill.

• Korean Business Review
• /
• v.4
• /
• pp.355-383
• /
• 1991

1. The Purpose of This study research: The focus of marketing until recently has simply been on sales which means the transfer of goods from the producer to the consumer and on profits therefrom. However, the excess supply of goods due to the expansion of the economy and the resulting fierce competition between companies have changed the nature of marketing. Maximizing consumers' satisfaction and establishing marketing mix strategies for market subdivision and penetration into the target market are now significant roles of the marketing manager. In addition, with regard to company management, information within the company which had been collected, managed and processed sporadically indegrated manner. The purpose of this research on marketing information systems in connection with the above will be to seek ways enabling us to create an efficient and integrated information system for an entire company. 2. The Method and Scop of This Stdudy: Marketing information systems, as a part of management information systems, shall be examined based on relevant theoretical literature. The research process shall be generally developed as follows: 1) The basic structure of the marketing information systems, including its fundamental purpose and necessity, shall be examined. 2) The method for a specific plan shall be presented through fundamental marketing strategy concepts and marketing decision-making. 3) A general model shall be presented based on examinations of various mod els used for marketing information systems and on research of the models' relationship with management information systems. 4) The direction of development shall be presented as the basis for gradual development following examination of the scope, pertinent issues, and means of improvement of the marketing information systems. 3. Summary and Conclusion: As the competition among the enterprises has become keen and thus the management of the contemporary enterprises shows the tendencies of uncertainty as well as complexity, all the managers must make the correct and prompt decision of their mind. Otherwise, the danger which will lead to and failure in the failure in the business may befall to the enterprise. Though computer system and information related techniques have the endless potentiality for the improvement of the enterprise, those are granted only to the enterprise which will be able to manage the computer system and information related techniques. In the contemporary industrial society, the need to a managerial information system has been increasing because all the complicated information can be stored, disposed and managed by the efficient method. And the marketing information system is also the integrated system which has been formed and developed through the efficient mixture of all the constituent elements including the definition of marketing research as the definition of the information system has been enlarged due to the reason shown above. The common point of the two systems is the man machine system functioning to help the efficient decision of the mind by introducing the computer system on the basis of user manager centered thought in order to provide informations to be useful in operation and management of the organization and the function of the mind decision. The purpose for the marketing information system lies in making the utmost use of marketing information available in the course of the mind decision. The reason why the contemporary enterprises necessitate the marketing information system are as follows: 1) The stages of the business operation are expanded wide to the world. 2) As the living standards of the consumers have been on the rise, the enter prise has to satisfy the consumer's "wants" than simple "needs".

• Journal of Digital Convergence
• /
• v.11 no.4
• /
• pp.177-188
• /
• 2013

This study examines how managerial ownership structure affects the borrower's choice of private versus public debt using 2,608 firm-year data for 2006-2008. This paper investigates the relationship between managerial ownership structure and debt choice. Managerial ownership is measured using number of stocks and unexercised stock-options and debt is classified public and private debt. The results find that there is a positive association between managerial ownership and the private debt dependence and also find that when firms finance additional funds, higher managerial ownership leads managers to choose private debt not public debt. Since private debt can be classified into bank debt and non bank debt, this paper examines the relationship between managerial ownership and a choice of bank debt. The results indicate that managers with higher ownership are more likely to use bank debt over public debt and non bank debt. By examining the relation between managerial ownership and a debt choice, this paper has following contributions. First, this study shows that managerial ownership affects the choice of the source of financing using three different proxies of managerial ownership. Second, this study classified private debt into bank debt and non-bank debt and provide the evidence of preference toward private debt especially bank debt among other financing sources. Finally, there are extensive studies related to capital structure and managerial ownership, but there is little empirical research on the debt choice and managerial ownership. Thus, this paper adds to literature by exploring the effects of managerial ownership on a debt choice.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.1
• /
• pp.55-70
• /
• 2018

Recently, as shared transportation services has expanded, integrated mobility services that link personal transportation and public transportation are paid attention. To do this, it is necessary to analyze trip mode chaining behavior. This study analyzed the characteristics of the trip mode chaining behavior using the 2010 travel diary survey in Seoul, and analyzed factors to affect mode choice of trip chaining through the multinomial logit model. The transportation means were classified into passenger cars, city buses, intercity buses, railways, taxis, and others, and 25 trip mode chaining types were identified. Among them, the trip share connected between city bus and railways was the highest. It was also found that the trip mode chaining occurred mainly at commuting and in the morning and afternoon peak. According to the model results, the mode choice of trip chaining is significantly influenced by individual attributes (sex and age), household attributes (car ownership and income), trip attributes (trip purpose, trip time and trip length), and arrival area attributes (number of subway lines and bus lines, ratio of commercial area, land use mix and central region).

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.2
• /
• pp.23-34
• /
• 2014

Though a dozen of different software life cycle models are suggested, there is no universal model which can satisfy all the characteristics of software. Organizations mix and match different life cycle models to develop a model more tailored for their systems and capabilities. We suggest overlapped-concurrent development life cycle model that is more suitable in various software development environment. Firstly, we divided the development process into abstract and implementation stage. Abstract stage is from software concept phase to detailed design starting time, and implementation stage is from detailed design phase to system testing phase. Next, the abstract stage introduced the overlapped phase concept that begins the next phase when the step is completed 20% by applying pareto's law. In the implementation stage, we introduced the concurrent development which the several phases are performed some time as when one use-case (UC) is completed the next development phase is started immediately. The proposed model has an advantage that it can reduce the inefficiency of development resource greatly. This model can increase the customer satisfaction with a great product at a low cost and on a short schedule. Also, this model can contribute to increase the software development success rate.