• 한국토양비료학회지
• /
• 제45권1호
• /
• pp.16-19
• /
• 2012

Increasing rice grain yield is critical for feeding rapid increasing of Asian population. However, global warming effect may be negative for sustainable rice production. Therefore it is essential to develop technologies not only for increasing grain yield but also for reducing global warming effect. Biochar, which is carbonized biomass, has a great potential of carbon sequestration and soil quality improvement, which can contribute grain yield increasing. In this study, rice yield responses to biochar application on the rice cropping system were evaluated with field experiments under different water management practices at the research farm of the University of Missouri-Columbia Delta Research Center, Portageville, MO. Biochar (i.e., $4Mg\;ha^{-1}$) was produced using field scale pyrolyzer and incorporated into the field 4 months prior to planting. Rice was grown under three different water management practices. Result showed that no significant yield difference was found in the biochar application plots compared to rice hull and control plots from the 2 years field study at the very fertile soil. However, rainfed management results in severe reduction of yield. Research concludes that the biochar application does not significantly influence on rice yield increasing especially for very fertile soils.

• Structural Engineering and Mechanics
• /
• 제17권3_4호
• /
• pp.573-591
• /
• 2004

A hybrid control system is presented for seismic-resistant building structures with and without soil-structure interaction (SSI). The hybrid control is a damper-actuator-bracing control system composed of passive and active controllers. An intelligent algorithm is developed for the hybrid system, in which the passive damper is designed for minor and moderate earthquakes and the active control is designed to activate when the structural response is greater than a given threshold quantity. Thus, the external energy for active controller can be optimally utilized. In the control of a multistory building, the controller placement is determined by evaluating the optimal location index (OLI) calculated from six earthquake sources. In the study, the soil-structure interaction is considered both in frequency domain and time domain analyses. It is found that the interaction can significantly affect the control effectiveness. In the hybrid control algorithm with intelligent strategy, the working stages of passive and active controllers can be different for a building with and without considering SSI. Thus SSI is essential to be included in predicting the response history of a controlled structure.

• Asian-Australasian Journal of Animal Sciences
• /
• 제16권6호
• /
• pp.880-883
• /
• 2003

The objective of this study was to measure performance of young broiler chickens fed three varieties of high-oil corn (HOC 1, 2, and 3) compared with eight varieties of normal corn (NC). HOC varieties contained about 80% more oil than NC (average crude fat; 6.71% vs 3.72%) and about 29% more protein (average CP; 9.54% vs 7.38%). Each experimental diet was formulated with the same amount (55.205%) of each corn hybrid. Experiment 1 had by six dietary treatments (HOC1 and five NC varieties, 360 chickens) and Experiment 2 had five treatments (HOC2, HOC3, and three NC varieties, 250 chickens). In Exp. 1, for feed efficiency (F/G), the treatment contained HOC1 had better performance (p<0.05) than other NC varieties except NC5. As expected, there was no significant difference in average daily feed intake (p>0.05) among dietary treatments. The dietary treatment of HOC1 gave an improvement of 4.3% in F/G that came from 6% higher gross energy (GE) value of HOC1. Compared with Exp. 2, the dietary treatments contained HOC hybrids gave 4.4% higher F/G than NC dietary treatments, which came from a 5% increase in GE value. HOC varieties had superior nutrients content to NC for poultry, due to the fact that HOC contained higher concentrations of energy, protein, lysine, and methionine, thus improving growth and F/G.

• Journal of Computing Science and Engineering
• /
• 제2권2호
• /
• pp.180-199
• /
• 2008

Technology has had a tremendous impact on our daily lives. Recently, technology and its impact on aging has become an expanding field of inquiry. A major reason for this interest is that the use of technology can help older people who experience deteriorating health to live independently. In this paper we give a brief review of the in-home monitoring technologies for the elderly. In the pilot study, we analyze the possibility of employing the data generated by a continuous, unobtrusive nursing home monitoring system for predicting elevated(abnormal)pulse pressure(PP) in elderly(PP=systolic blood pressure-diastolic blood pressure). Our sensor data capture external information(behavioral) about the resident that is subsequently reflected in the predicted PP. By continuously predicting the possibility of elevated pulse pressure we may alert the nursing staff when some predefined threshold is exceeded. This approach may provide additional blood pressure monitoring for the elderly persons susceptible to blood pressure variations during the time between two nursing visits. We conducted a retrospective pilot study on two residents of the TigerPlace aging in place facility with age over 70, that had blood pressure measured between 100 and 300 times during a period of two years. The pilot study suggested that abnormal pulse pressure can be reasonably well estimated (an area under ROC curve of about 0.75) using apartment bed and motion sensors.

• Membrane and Water Treatment
• /
• 제4권2호
• /
• pp.109-126
• /
• 2013

Surface modification by low-pressure ammonia ($NH_3$) plasma on commercial thin-film composite (TFC) membranes was investigated in this study. Surface hydrophilicity, total surface free energy, ion exchange capacity (IEC) and zeta (${\zeta}$)-potentials were determined for the TFC membranes. Qualitative and quantitative analyses of the membrane surface chemistry were conducted by attenuated total reflectance Fourier transform infrared (ATR FT-IR) spectroscopy. Results showed that the $NH_3$ plasma treatment increased the surface hydrophilicity, in particular at a plasma treatment time longer than 5 min at 50 W of plasma power. Total surface free energy was influenced by the basic polar components introduced by the $NH_3$ plasma, and isoelectric point (IEP) was shifted to higher pH region after the modification. A ten (10) min $NH_3$ plasma treatment at 90 W was found to be adequate for the TFC membrane modification, resulting in a membrane with better characteristics than the TFC membranes without the modification for water treatment. The thin-film chemistry (i.e., fully-aromatic and semi-aromatic nature in the interfacial polymerization) influenced the initial stage of plasma modification.

• Journal of information and communication convergence engineering
• /
• 제14권4호
• /
• pp.252-257
• /
• 2016

An edge-located electromagnetic bandgap (EL-EBG) structure using a defected ground structure (DGS) is proposed to suppress resonant modes induced by edge excitation in a two-dimensional planar parallel plate waveguide (PPW). The proposed EL-DGS-EBG PPW significantly mitigates multiple transverse-magnetic (TM) modes in a wideband frequency range corresponding to an EBG stopband. To verify the wideband suppression, test vehicles of a conventional PPW, a PPW with a mushroom-type EBG structure, and an EL-DGS-EBG PPW are fabricated using a commercial process involving printed circuit boards (PCBs). Measurements of the input impedances show that multiple resonant modes of the previous PPWs are significantly excited through an input port located at a PPW edge. In contrast, resonant modes in the EL-DGS-EBG PPW are substantially suppressed over the frequency range of 0.5 GHz to 2 GHz. In addition, we have experimentally demonstrated that the EL-DGS-EBG PPW reduces the radiated emission from -24 dB to -44 dB as compared to the conventional PPW.

• Tribology and Lubricants
• /
• 제11권5호
• /
• pp.99-107
• /
• 1995

This paper reported research results to develop an algorithm of on-lin evaluation of surface profiles and roughness generated by turning. The developed module consisted of computer simulation of surface profiles using mechanism of cutting mark formation and cutting vibrations, and online measurement of cutting vibrations. The relative cutting vibrations between tool and worpkiece were measured through an inductance pickup at the rate of one sample per rotation of the workpiece. The sampling process was monitored using an encoder to avoid conceling out the phase lag between waves. The digital cutting signals from the Analog-to-Digital converter were transferred to the simulation module of surface profile where the surface profiles were generated. The developed algorithm or surface generation in a hard turning was analyzed through computer simulations to consider the stochastic and dynamic nature of cutting process. Cutting tests were performed using AISI 304 Stainless Steel and carbide inserts in practical range of cutting conditions. Experimental results showed good correlation between the surface profiles and roughness obtained using the developed algorithm and the surface texture measured using a surface profilemeter. The research provided the feasibility to monitor surface characteristics during tribelogical tests considering wear effect on surface texture in machining.

• 대한수의학회지
• /
• 제50권1호
• /
• pp.59-62
• /
• 2010

A 2-year-old lineolated parakeet (Bolborhynchus lineola) was presented with abdominal distention and respiratory distress for two months. The bird was poorly fleshed and the liver was enlarged on coelomic palpation. Plain and contrast radiographic examinations exhibited hepatomegaly and distended intestinal loop, which compromised the air sacs. Multifocal hyperechogenecity was observed in the liver on ultrasonography. Postmortem gross examination revealed hepatomegaly with numerous pinpoint tan foci in the hepatic parenchyma and distended small intestine filled with adult ascarids. Microscopically, granulomatous hepatitis and enteritis infected by intrahistiocytic acid-fast bacilli were evident. Polymerase chain reaction indicated that the acid-fast bacilli were Mycobacterium avium subsp. avium.

• 한국과학교육학회지
• /
• 제24권4호
• /
• pp.731-747
• /
• 2004

The scientific inquiry enterprise consists of formulating hypotheses, testing hypotheses, evaluating evidence, and revising hypothesis. Scientific inquiry in the science classrooms requires students' background experience and knowledge with the phenomenon in order to ask appropriate questions, identify and define variables operationally, formulate hypotheses, and design clear and complete experiment. The ability to test hypotheses has been postulated to play a central role in cognitive processes. The purpose of this study was to analyze what the change of the quantity and quality of the hypothesis, the rejecting or accepting of the hypothesis, and the use results in the repetitional hypothesis activity experiments. To examine the problems, this study analyzed 5 classes which were designed and administered to 16 students of the 7th grade. The results of this study showed that students preferred the engineering method to scientific method and the quality of a second hypothesis got low. The quality of the hypothesis came to be higher through a repetitional hypothesis and the number of hypothesis was reduced. The results of the experiments did not play central roles in revising hypotheses and accepting or rejecting hypothesis.

• The Journal of Asian Finance, Economics and Business
• /
• 제5권1호
• /
• pp.11-16
• /
• 2018

This research examines the alternative ways of estimating the coefficient of non-diversifiable risk, namely beta coefficient, in Capital Asset Pricing Model (CAPM) introduced by Sharpe (1964) that is an essential element of assessing the value of diverse assets. The non-parametric methods used in this research are the robust Least Trimmed Square (LTS) and Maximum likelihood type of M-estimator (MM-estimator). The Jackknife, the resampling technique, is also employed to validate the results. According to finance literature and common practices, these coecients have often been estimated using Ordinary Least Square (LS) regression method and monthly return data set. The empirical results of this research pointed out that the robust Least Trimmed Square (LTS) and Maximum likelihood type of M-estimator (MM-estimator) performed much better than Ordinary Least Square (LS) in terms of eciency for large-cap stocks trading actively in the United States markets. Interestingly, the empirical results also showed that daily return data would give more accurate estimation than monthly return data in both Ordinary Least Square (LS) and robust Least Trimmed Square (LTS) and Maximum likelihood type of M-estimator (MM-estimator) regressions.