• Journal of the Semiconductor & Display Technology
• /
• v.19 no.1
• /
• pp.11-16
• /
• 2020

In this paper, system that includes multiple unmanned aerial vehicles (UAVs) are considered. The vehicles are equipped with a mission computer for a specific mission and equipment. The mission equipment operates based on the time of mission computer. Also, data collected by flight computer and mission computer is saved with the time of each operating system. Generally, time offset between multiple computers always exists, though the computers are connected to the Internet. When the data collected by multiple computers is combined, the time offset causes damage on reliability of the combined data. Computers that connected to the Internet are synchronized by network time protocol (NTP). This paper proposes a system that the time of multiple mission computers are synchronized by the same NTP server to minimize the time offset. In the results of the measurement, the system time offset of multiple mission computer is maintained within 10ms from the system time of the server computer.

• The KIPS Transactions:PartA
• /
• v.16A no.4
• /
• pp.235-244
• /
• 2009

The mission-critical computer for air defense has to maintain its operation without any fault for a long mission time and is required to implement at low cost. Now the reliability of the mission critical-computer using Active Sparing Redundancy fault-tolerant technique is inferior to that of the computer using TMR technique. So in this paper are proposed Extended ASR(EASR) technique that provides higher reliability than that of the computer using TMR technique. The fault-tolerant performance of the implemented mission-critical computer is proven through reliability analysis and numbers of fault recovery test. Also, the reliability of the mission-critical computer using EASR technique is compared with those of computer using ASR and TMR techniques. EASR technique is very suitable to the mission-critical computer.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.2
• /
• pp.213-221
• /
• 2011

Avionics system tends to be designed to have the integrated architecture, and it is getting difficult and complex to verify the flight-critical function because of sophisticated structure. In Korean Utility Helicopter, mission computer acts as the MUX Bus Controller to handle the data from both communication, identification, mission/display and survivability equipment inside Mission Equipment Package and aircraft subsystems such as fuel system and electrical system while it is interfacing with Automatic Flight Control System and Full-Authority Digital Engine Control via ARINC-429 bus. The Flight Displays which is classified as flight-critical function in aircraft is implemented on Primary Flight Display after mission computer processes data from AFCS in order to generate graphics. This paper defines the flight-critical function implemented in mission computer for KUH, and presents the static and dynamic test procedures which is performed on System Integration Laboratory along with Playback Recorder prior to flight test.

• The KIPS Transactions:PartA
• /
• v.15A no.6
• /
• pp.309-316
• /
• 2008

The mission-critical engagement control computer for air defense has to maintain its operation without any fault for a long mission time. The mission performed by large-scale and complex embedded software is extremely critical in terms of dependability and safety of computer system, and it is very important that engagement control computer has high reliability. The engagement control computer was implemented using four processors. The distributed computer composed of four processors quarantees the dependability and safety, and ASR fault-tolerant technique applied to each processor guarantees the reliability. In this paper, the mechanism and performance of ASR fault-tolerant technique are analysed. And MTBF, reliability, availability, and cost-effectiveness for ASR, DMR and TMR techniques applied to the engagement control computer are analysed. The mission-critical engagement control computer using software-based ASR fault-tolerant technique provides high reliability and fast recovery time at a low cost. The mission reliability of the engagement control computer using ASR technique in 4 processors board is almost same the reliability of the computer using TMR technique in 6 processors board. ASR technique is most suitable to the mission-critical engagement control computer.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.6
• /
• pp.762-770
• /
• 2015

Fault tolerance is a crucial design for a mission-critical computer such as engagement control computer that has to maintain its operation for long mission time. In recent years, software fault-tolerant design is becoming important in terms of cost-effectiveness and high-efficiency. In this paper, we propose MPCMCC which is a model-based software component to implement fault tolerance in mission-critical computers. MPCMCC is a fault tolerance design that synchronizes shared data between two computers by using the one-way message-passing scheme which is easy to use and more stable than the shared memory scheme. In addition, MPCMCC can be easily reused for future work by employing the model based development methodology. We verified the functions of the software component and analyzed its performance in the simulation environment by using two mission-critical computers. The results show that MPCMCC is a suitable software component for fault tolerance in mission-critical computers.

• Journal of Information Technology and Architecture
• /
• v.9 no.3
• /
• pp.243-251
• /
• 2012

This paper presents the Conceptual Models of the Mission Space-Korea (CMMS-K), which is an ontology-based conceptual modeling framework of the mission space. Through modeling and simulating military trainings, we can reduce the cost of actual military trainings in terms of time, space, and supplies. CMMS-K is being developed to improve the interoperability and reusability of defense models and simulations. CMMS-K reflects the needs and characteristics of Korean military while referring to existing military conceptual modeling frameworks. The main components of CMMS-K contain domain ontologies, a mission space model description language, a mission space modeling tool, and a CMMS-K management system. CMMS-K domain ontologies consist of entity and task ontologies. In this paper, the CMMS-K domain ontologies are described in detail and the feasibility of the proposed method is discussed with a case study.

• Journal of the military operations research society of Korea
• /
• v.15 no.1
• /
• pp.14-27
• /
• 1989

This paper deals with the mission effectiveness of an airfleet, Airfleet operating system consists of a finite number of units performing the several mission types. Earlier works for the mission effectiveness of a fleet is limited to only one mission type and computer simulation approaches. The mission effectiveness. model of a fleet is constructed by three attributes - the mission readiness of the units, the mission reliability and capability of units. The environmental conditions and human factors affecting the mission success are considered together. The solution of the model is obtained by analytical technique. Especially, AOS is considered a closed queueing network with a finite number of units and a single job class. And then, the mission readiness of the units is found by the mean value analysis. The model would be a useful tool to readily evaluate mission effectiveness of a airfleet as it is and provide a criterion for determining the optimal operating policy.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.8
• /
• pp.813-822
• /
• 2010

Integrated data processing for display of flight critical data and mission critical data was conducted without additional display instruments using glass cockpit design. Based on a pre-designed flight critical system and a mission critical system, this paper shows an optimal design of subsystem integration. The design satisfies safety requirements of flight control systems(FCS) and requires minimized modification of pre-designed systems. By conducting integration test using System Integration laboratory(SIL), it is confirmed that the introduced design approach meets the safety requirements of the MEP system.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.246-249
• /
• 2005

Satellite ground track display computer program is designed and implemented for the KOMPSAT-2 mission operations. Digitized world map and detailed Korean map is realized with zoom and pan capability. The program supports real-time ground trace and off-line satellite image planning on the world map. Satellite mission timeline is also displayed with the satellite ground track for the visualized mission operations. In this paper, the satellite ground track display is described in the aspect of the functional requirements, design, and implementation.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.22 no.4
• /
• pp.81-86
• /
• 2014

In the development of an avionics system, there is a trend of using commercial-off-the-shelf(COTS) equipments in order to reduce the development cost and time. In this paper, we present an implementation of an aircraft mission computer using the objected oriented software and the COTS equipments. We execute the aircraft guidance software on the system, and measure the calculation time and the used memory. To compare the guidance capability of the software program, we implement the same software logic on DS1104 system. The guidance software program executed on two different systems resulted in the almost identical simulation.