• 제목/요약/키워드: Misfit strain

검색결과 36건 처리시간 0.025초

Effects of elastic strain on the agglomeration of silicide films for electrical contacts in integrated circuit applications

  • Choy, J.H.
    • 한국결정성장학회지
    • /
    • 제14권3호
    • /
    • pp.95-100
    • /
    • 2004
  • This paper reports a potential problem in the electrical performance of the silicide film to silicon contacts with respect to the scaling trend in integrated circuit (IC) devices. The effects of elastic strain on the agglomeration of the coherent silicide film embedded in an infinite matrix are studied employing continuum linear elasticity and finite-difference numerical method. The interface atomic diffusion is taken to be the dominant transport mechanism where both capillarity and elastic strain are considered for the driving forces. Under plane strain condition with elastically homogeneous and anisotropic system with cubic symmetry, the dilatational misfit and the tetragonal misfit in the direction parallel to the film thickness are considered. The numerical results on the shape evolution agree with the known trend that the equilibrium aspect ratio of the film increases with the elastic strain intensity. When the elastic strain intensity is taken to be only a function of the film size, the flat film morphology with a large aspect ratio becomes increasingly unstable since the equilibrium aspect ratio decreases, as the film scales. The shape evolution results in a large decrease in contact to silicon area, and may deteriorate the electrical performances.

유한요소법을 사용한 나노스프링의 기하학적 형상에 관한 연구 (A Study on Geometric Shape of Nanospring using Finite Element Method)

  • 김성섭;김원배;조맹효
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 2010년도 정기 학술대회
    • /
    • pp.562-565
    • /
    • 2010
  • 본 논문에서는 유한요소법을 이용하여 두 개의 층으로 이루어진 Si/SiGe 나노스프링의 기하학적 형상에 대한 연구가 수행된다. 나노스프링의 기하학적 형상에 영향을 미치는 주 설계요소로는 두께, 폭, 길이, 격자방향 등이 있으며, 두 개의 층으로 이루어진 Si/SiGe 박막이 나노스프링의 형상을 가지게 되는 주원인으로는 두 개의 층 경계면에서 발생하는 misfit strain이 있다. 본 연구에서는 두께, 폭, 길이, 격자방향 등의 설계요소를 변화시켜가면서 mistif strain에 의한 나노스프링의 곡률 변화에 대한 해석 결과가 제시된다. 또한 해석 결과의 검증을 위해 해석해의 결과와 분자동력학 전산모사 결과가 함께 제시된다.

  • PDF

Growth features and nucleation mechanism of Ga1-x-yInxAlyN material system on GaN substrate

  • Simonyan, Arpine K.;Gambaryan, Karen M.;Aroutiounian, Vladimir M.
    • Advances in nano research
    • /
    • 제5권4호
    • /
    • pp.303-311
    • /
    • 2017
  • The continuum elasticity model is applied to investigate quantitatively the growth features and nucleation mechanism of quantum dots, nanopits, and joint QDs-nanopits structures in GaInAlN quasyternary systems. We have shown that for GaInAlN material system at the critical strain of ${\varepsilon}^*=0.039$ the sign of critical energy and volume is changed. We assume that at ${\varepsilon}={\varepsilon}^*$ the mechanism of the nucleation is changed from the growth of quantum dots to the nucleation of nanopits. Obviously, at small misfit (${\varepsilon}$ < ${\varepsilon}^*$), the bulk nucleation mechanism dominates. However, at ${\varepsilon}$ > ${\varepsilon}^*$, when the energy barrier becomes negative as well as a larger misfit provides a low-barrier path for the formation of dislocations, the nucleation of pits becomes energetically preferable. The free energy of mixing for $Ga_{1-x-y}In_xAl_yN$ quasiternary system was calculated and studied and its 3D sketch was plotted.

임플란트와 상부보철물의 임상적/실험적 부적합 평가에 관한 문헌고찰 (A literature review on clinical/ laboratory misfit evaluation on implant-prosthesis)

  • 김종회;조웅래;고경호;허윤혁;박찬진;조리라
    • 대한치과의사협회지
    • /
    • 제56권9호
    • /
    • pp.462-478
    • /
    • 2018
  • 임플란트와 지대주 간에 허용가능한 적합도를 넘는 부적합을 발견하고 이에 대처하는 것은 중요한 과제이다. 부적합을 임상에서 평가하고 발견하는 방법은 대부분 부적합의 정성적 평가에 치중하고 있으며 술자의 숙련도에 의존하고 있어 정확한 평가방법이라고 하기는 어렵다. 부적합의 정도를 판단하고 원인을 실험적으로 분석하는 방법 중 본 문헌고찰에서는 광탄성 분석법, 유한요소분석법, 스트레인게이지, 미생물 균체 분석 등 조건을 모형화하여 분석하는 모형화법과 사진 측량, 삼차원 좌표 측정, 현미경분석 및 방사선분석을 통해 부적합의 정도를 정밀하게 측정하는 수치법을 각각 설명하고 그 장단점 및 적용의 한계를 분석하였다. 지금까지 살펴본 실험실 부적합 평가 방법들을 장, 단점 및 정확도와 재현성을 기준으로 표로 정리한 것이 Table 3이다. 어떤 방법도 모든 경우에 적용할 수 있을 정도로 완벽하지는 않으므로 평가하고자 하는 부적합의 특성에 따라 적절한 평가방법을 선택하여 적용하는 것이 필요하다고 사료된다.

  • PDF

In Situ Spectroscopy in Condensed Matter Physics

  • Noh, Tae Won
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
    • /
    • pp.92-92
    • /
    • 2014
  • Recently, many state-of-art spectroscopy techniques are used to unravel the mysteries of condensed matters. And numerous heterostructures have provided a new avenue to search for new emergent phenomena. Especially, near the interface, various forms of symmetry-breaking can appear, which induces many novel phenomena. Although these intriguing phenomena can be emerged at the interface, by using conventional measurement techniques, the experimental investigations have been limited due to the buried nature of interface. One of the ways to overcome this limitation is in situ investigation of the layer-by-layer evolution of the electronic structure with increasing of the thickness. Namely, with very thin layer, we can measure the electronic structure strongly affected by the interface effect, but with thick layer, the bulk property becomes strong. Angle-resolved photoemission spectroscopy (ARPES) is powerful tool to directly obtain electronic structure, and it is very surface sensitive. Thus, the layer-by-layer evolution of the electronic structure in oxide heterostructure can be investigated by using in situ ARPES. LaNiO3 (LNO) heterostructures have recently attracted much attention due to theoretical predictions for many intriguing quantum phenomena. The theories suggest that, by tuning external parameters such as misfit strain and dimensionality in LNO heterostructure, the latent orders, which is absent in bulk, including charge disproportionation, spin-density-wave order and Mott insulator, could be emerged in LNO heterostructure. Here, we performed in situ ARPES studies on LNO films with varying the misfit strain and thickness. (1) By using LaAlO3 (-1.3%), NdGaO3 (+0.3%), and SrTiO3 (+1.7%) substrates, we could obtain LNO films under compressive strain, nearly strain-free, and tensile strain, respectively. As strain state changes from compressive to tensile, the Ni eg bands are rearranged and cross the Fermi level, which induces a change of Fermi surface (FS) topology. Additionally, two different FS superstructures are observed depending on strain states, which are attributed to signatures of latent charge and spin orderings in LNO films. (2) We also deposited LNO ultrathin films under tensile strain with thickness between 1 and 10 unit-cells. We found that the Fermi surface nesting effect becomes strong in two-dimensions and significantly enhances spin-density-wave order. The further details are discussed more in presentation. This work was collaborated with Hyang Keun Yoo, Seung Ill Hyun, Eli Rotenberg, Ji Hoon Shim, Young Jun Chang and Hyeong-Do Kim.

  • PDF

변형률 속도에 따른 탄소강의 재결정 거동에 미치는 미량 합금 원소의 영향 (Effect of Micro-Alloying Elements on Recrystallization Behavior of Carbon Steels at Different Strain Rates)

  • 이상인;임현석;황병철
    • 한국재료학회지
    • /
    • 제26권10호
    • /
    • pp.535-541
    • /
    • 2016
  • The present study deals with the effects of micro-alloying elements such as Ni, V, and Ti on the recrystallization behavior of carbon steels at different strain rates. Eight steel specimens were fabricated by varying the chemical composition and reheating temperature; then, a high-temperature compressive deformation test was conducted in order to investigate the relationship of the microstructure and the recrystallization behavior. The specimens containing micro-alloying elements had smaller prior austenite grain sizes than those of the other specimens, presumably due to the pinning effect of the formation of carbonitrides and AlN precipitates at the austenite grain boundaries. The high-temperature compressive deformation test results indicate that dynamic recrystallization behavior was suppressed in the specimens with micro-alloying elements, particularly at increased strain rate, because of the pinning effect of precipitates, grain boundary dragging and lattice misfit effects of solute atoms, although the strength increased with increasing strain rate.

$Mg_2NiH_x$ 수소저장합금의 미세결정구조 및 수소화 특성평가 (Evaluations of Microstructure and Hydrogenation Properties on $Mg_2NiH_x$)

  • 석송;신경;권순용;어순철;이영근;홍태환
    • 한국수소및신에너지학회논문집
    • /
    • 제16권3호
    • /
    • pp.238-243
    • /
    • 2005
  • Mg and Mg-based alloys are most important hydrogen storage materials. It is a lightweight and low-cost materials with high hydrogen storage capacity. However, the formation of hydride at high temperature, the deterioration effect, the hydriding and dehydriding kinetics are bad factor for application. In this study, Mg and Ni have been produced by hydrogen induced mechanical alloying(HIMA) process. The raw materials, Mg(purity 99.9%) chip and Ni(purity 99.95%) chip was prepared by using a planetary ball mill apparatus(FRITSCH pulverisette 5). The balls to chips mass ratio(BCR) are 30:1. The hydrogen pressure induced 2.0MPa and milling times were 12, 24, 48, 72, 96 hours with a rotating speed of 200rpm. X-ray diffraction(XRD) analysis was made to characterize the crystallite size and misfit strain. The crystallite size measured by laser particle size analysis(PSA). Microstructure changes were investigated by scanning electron microscopy(SEM) and the transmission electron microscopy(TEM). The hydrogen storage properties were evaluated by using an Sivert's type automatic pressure-composition-therm(PCT) apparatus.