• 제목/요약/키워드: Mirror Symmetry

검색결과 32건 처리시간 0.025초

연X-선 투사 리소그라피를 위한 등배율 포물면 2-반사경 Holosymmetric System (Paraboloidal 2-mirror Holosymmetric System with Unit Maginification for Soft X-ray Projection Lithography)

  • 조영민;이상수
    • 한국광학회지
    • /
    • 제6권3호
    • /
    • pp.188-200
    • /
    • 1995
  • 파장 13nm의 연 X-선을 사용하여 초고밀도 반도체 칩을 네작할 수 있는 고분해능의 투사 결상용 2-반사경계(배율=1)을 설계하였다. 등배율(1:1)의 광학계는 holosymmetric system으로 구성하였을 때 코마와 왜곡수차가 완전히 제거되는 이점을 갖는다. 2-반사경 holosymmetric system에서 추가적으로 구면수차를 제거하기 위해 두 반사경을 동일한 포물면으로 만들고 두 반사경 사이 거리를 조절하여 비점수차와 Petzval 합이 상쇄되게 함으로써 상면만곡 수차를 보정하였다. 이렇게 구한 aplanat flat-field 포물면 2-반사경 holosymmetric system은 크기가 작고 광축회전대칭의 간단한 구조를 가지면 중앙부 차폐가 아주 작다는 특징을 갖고 있다. 이 반사경계에 대해 잔류 수차, spot diagrams, 회절효과가 고려된 NTF의 분석 등을 통해 연 X-선 리소그라피용 투사 광학계로서의 성능이 조사된 결과, $0.25\mum$및. $0.18\mum$의 해상도가 얻어지는 상의 최대 크기가 각각 4.0mm, 2.5mm로 구해졌고 초점심도는 각각 $2.5.\mu$m, $2.4.\mum$로 얻어졌다. 그러므로 이 반사경계는 256Mega DRAM 및 1Giga DRAM의 반도체 칩 제작의 연구에 응용될 수 있다.

  • PDF

3차원 구조 배열안테나를 적용한 GPS 간섭신호 미러 이미지 제거 (The Rejection of the GPS Interference Mirror Image by using the Three-dimensional Array Antenna)

  • 김준오;이상정
    • 한국항행학회논문지
    • /
    • 제22권4호
    • /
    • pp.295-301
    • /
    • 2018
  • 최근에 GPS(Global Positioning System) 간섭신호 제거를 위해서 배열안테나 기술 적용이 일반화되고 있으며, 이러한 안테나 기반의 GPS 수신 신호 보호 기술은 지상의 주요 국가 인프라 및 항공분야에서 점진적으로 확대 적용되는 추세이다. 이와 같은 배열안테나 기반의 간섭신호 제거 기술은 지금까지 평면 배열안테나인 2차원 구조가 보편적으로 활용되지만, 상대적으로 높은 고도에서 운용되는 무인기 같은 비행체의 경우 아래쪽에서 여기되는 간섭신호가 안테나 수평면과 대칭되는 위치에 미러 이미지에 의한 추가 널(null) 존(zone)이 발생하며 이로 인하여 수신가능 패턴 영역을 축소시킬 수 있다. 본 논문에서는 평면구조 배열안테나 사용 시 발생하는 간섭신호 미러 이미지 제거를 통해서 20%의 빔 패턴 수신 성능 향상 및 13 dB의 상관 값 성능을 개선하였다.

광학적 자기 보상 스플레이 구조를 갖는 새로운 액정 소자 (A Novel LC Device Associated with Optically Compensated Splay Structure)

  • 김승재;이종문;이승희
    • 한국전기전자재료학회논문지
    • /
    • 제17권5호
    • /
    • pp.536-540
    • /
    • 2004
  • A novel nematic liquid crystal (LC) cell with splay structure exhibiting wide viewing angle, fast response time and high transmittance at the same time has been developed. With rubbed homeotropic alignment in parallel directions, the device shows bend alignment in the absence of vertical electric field. However, with applied high voltage in a pulse form, the LC shows a optically compensated splay (OCS) orientation such that the mid-director is parallel to a substrate and at both surfaces the LCs are aligned vertically in parallel direction. In the device, the birefringence of the cell becomes tunable with applying voltage, i.e., the amount of light passed through the cell can be controlled by controlling the orientation of the LC. Since the OCS cell has a self-compensation structure such that the LC has a mirror symmetry along the mid-director, the device shows a wide viewing angle with only a single domain and a fast response time.

X-線 廻折法을 利用한 벤지딘過鹽素酸鹽의 結晶構造에 關한 硏究 (II)結晶構造의 解析 (Studies on the Crystal Structure of Benzidine Perchlorate by X-ray Diffraction method (II) Crystal Structure Analysis)

  • 구정회;신현소;강만형
    • 대한화학회지
    • /
    • 제14권1호
    • /
    • pp.123-126
    • /
    • 1970
  • The approximate crystal structure of benzidine monoperchlorate has been determined by single crystal X-Ray diffraction technique and patterson method. As the molecule has a center of symmetry in it and location of perchlorate ion is symmetrically on the mirror plane in the unit cell, perchlorate ion is forming hydrogen bond with two -$NH_2$ groups in the different molecule. Thus, one molecule of benzidine and perchloric acid combines 1:1 by mole ratio.

  • PDF

Design of Body RF Coil with Multiple Strips for Open MRI System by Pseudo Electric Dipole Radiation

  • 김경락;류승학;류연철;양형진;오창현
    • 대한자기공명의과학회:학술대회논문집
    • /
    • 대한자기공명의과학회 2002년도 제7차 학술대회 초록집
    • /
    • pp.76-76
    • /
    • 2002
  • Purpose: The purpose of this study is to optimize the configuration of body RF coil composed of 4 planar subcoils for low field open MRI. Method: Our low field RE coil is composed of 4 subcoils assumed to be located at both the bottom and top sides of permanent magnet. Each subcoils has 3 main strips. The coil system has mirror inversion symmetry. First, the currents on the strips are obtained by inductance calculation and circuit analysis, Second, all the strips are divided into line strip elements across the strips, the self Inductances of line strip elements and the mutual inductances among the line strip elements are calculated, and current distributions of strip are obtained by circuit analysis, where each strip is considered as parallel combination of line strip elements. Finally all the line strip elements are segmented, magnetic field has been calculated by pseudo electric dipole radiation method, where the current elements are regarded as pseudo electric dipole radiation sources. We have performed above procedures for various configurations of RE coil. The field homogeneity is calculated in the 25 cm DSV.

  • PDF

고차 뉴런을 이용한 KOHONEN의 자기 조직화 맵 (Supervised Kohonen Feature Map Using Higher Order Neuron)

  • 정종수;하기와라 마사후미
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 하계학술대회 논문집 D
    • /
    • pp.2656-2659
    • /
    • 2001
  • 본 논문은 교사 있는 학습기의 Kohonen Feature Map에 고차 뉴런을 도입, 고차 뉴런을 이용한 Kohonen의 자기 조직화 맵을 제안한다. 일반적인 Kohonen Feature Map의 특징은 입력신호를 받아 출력 면(Kohonen Feature Map) 내의 특정한 위치 주위에 집중하는 메커니즘으로 즉, 국소집중 반응을 구하는 구조이다. 본 논문에서는 종래형의 Kohonen Feature Map의 특징을 보유하며 교사 있는 학습기의 Kohonen Feature Map에 고차 뉴런을 도입하여 국소집중반응 및 특징 축출이 용이하도록 네트워크 구조를 개선한 것이다. 특히, 일차 뉴런의 문제점인 비선형 분리 문제에 대하여 교사 있는 학습기의 Kohonen Feature Map의 입력층에 고차 뉴런을 도입함으로 비선형 분리 가능한 형태의 네트워크 구조로 형성하였다. 그러나, 일반적인 고차 뉴런의 문제점을 보안하기 위해 본 논문에서는 오직 2차 뉴런만을 생성하였으며 중복되는 뉴런을 최대한 억제하였다. 본 제안 모델의 특성을 살펴보기 위해 XOR문제와 20개의 Alphabet을 식별하는 패턴인식 시뮬레이션을 했으며, 본 제안 모델의 범화능력을 알아보기 위하여 Mirror Symmetry를 사용하여 계산기 시뮬레이션을 했다. 그 결과, 본 제안 모델이 종래형의 네트워크 구조보다 뛰어난 인식률을 얻을 수 있었다.

  • PDF

Asymmetric Mean Metallicity Distribution of the Milky Way's Disk

  • An, Deokkeun
    • 천문학회보
    • /
    • 제44권2호
    • /
    • pp.49.1-49.1
    • /
    • 2019
  • I present the mean metallicity distribution of stars in the Milky Way based on photometry from the Sloan Digital Sky Survey. I utilize an empirically calibrated set of stellar isochrones developed in previous work to estimate the metallicities of individual stars to a precision of 0.2 dex for reasonably bright stars across the survey area. I also obtain more precise metallicity estimates using priors from the Gaia parallaxes for relatively nearby stars. Close to the Galactic mid-plane (|Z| < 2 kpc), a mean metallicity map reveals deviations from the mirror symmetry between the northern and southern hemispheres, displaying wave-like oscillations. The observed metallicity asymmetry structure is almost parallel to the Galactic mid-plane, and coincides with the previously known asymmetry in the stellar number density distribution. This result reinforces the previous notion of the plane-parallel vertical waves propagating through the disk, which have been excited by a massive halo substructure such as the Sagittarius dwarf galaxy plunging through the Milky Way's disk. This work provides evidence that the Gaia phase-space spiral may continue out to |Z| ~ 1.5 kpc.

  • PDF

유리 위에 증착된 다결정 Fe 자성박막의 이차조화파 회전 이방성 (Second Harmonic Rotational Anisotropy of Polycrystalline Fe Films on Glass Substrates)

  • 이정우;정재우;이헌성;이경동;김지완;신성철
    • 한국자기학회지
    • /
    • 제19권2호
    • /
    • pp.47-51
    • /
    • 2009
  • 유리판 위에 증착된 다결정 Fe 자성박막의 두께에 따른 표면 결정 구조가 Ti : Sapphire 레이저를 사용하여 조사되었다. 비선형 광학 유전율의 결정구조에 따른 대칭성에 대한 계산으로부터 박막 표면은 $C_{2v}$에 매우 가까운 $C_s$ 구조를 갖음을 보였다. 이러한 광학적 회전 이방성은 임의 방향의 그레인으로 구성된 다결정 구조의 박막에서는 매우 이례적인 일이다. 이차조화파로부터 얻은 이 결과는 (110) bcc 형태로 자란 X선 회절 결과와도 일치하는 것으로 매우 얇은 상태일 때 가지고 있던 박막 표면의 등방 구조가 두께가 증가함에 따라 바뀌면서 bulk 상태의 구조를 점차적으로 갖게 됨을 보여주고 있다.

보급형 3D 프린터로 제작한 쇄골 골절 모델을 이용한 정형외과 수술에 대한 유용성과 활용가능성 평가 (Evaluation of Usefulness and Availability for Orthopedic Surgery using Clavicle Fracture Model Manufactured by Desktop 3D Printer)

  • 오왕균
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제37권3호
    • /
    • pp.203-209
    • /
    • 2014
  • 쇄골 CT 영상을 이용하여 보급형 3D 프린터로 제작된 모델로 사전 수술계획을 실시하여 수술효율에 대한 유용성과 임상적 활용가능성을 평가하였다. CT 영상을 Open Source DICOM Viewer Osirix에서 STL 파일로 변환하여 FDM 와이어 척층가공방식의 보급형 3D 프린터로 환자 맞춤형 쇄골 골절 모델을 제작하였다. 또한, 인체의 좌우 대칭 특성을 이용하여 골절되지 않은 반대편 쇄골의 STL 파일을 Mirror 기법으로 손상되기 전 원형의 모델을 복원, 제작하였다. 모델은 골절의 위치와 크기, 정도가 동일하게 출력되었다. 영상의학과에서 적은 비용과 시간으로 직접 제작한 쇄골 모델을 활용하면 수술시 2차 손상을 줄이고, 최소 침습적 피하금속판 골유합술(MIPO)로 수술효율을 높일 수 있어 임상적으로 유용할 것으로 생각된다.

회절격자 주기의 랜덤 변이가 DFB 레이저 특성에 미치는 영향 (Effects of the Random Fluctuation in Grating Period on the Characteristics of DFB Lasers)

  • 한재웅;김상배
    • 대한전자공학회논문지SD
    • /
    • 제37권8호
    • /
    • pp.76-85
    • /
    • 2000
  • 회절격자 주기의 랜덤 변이가 DFB 레이저의 특성에 미치는 영향을 유효 굴절률 전달 매트릭스 방법을 이용하여 해석하였다. 레이저의 양 거울면은 완전 무반사 처리되었다고 가정하였으며, 회절격자 주기의 변이는 Gaussian 랜덤 변수로 표현하였다. 회절격자 주기의 랜덤 변이는 균일 회절격자 DFB 레이저와 QWS-DFB 레이저 스펙트럼의 대칭성을 깨뜨리고 유효 결합계수를 감소시킨다. 이에 따라 균일 회절격자 DFB 레이저에서는 ${\pm}$1모드 거울면 손실의 평균값이 증가하고 금지 대역폭이 감소하며, QWS-DFB 레이저에서는 단일모드 안정성과 파장 정확도가 저하된다. QWS-DFB 레이저의 거울면 손실 차이는 결합계수에 관계없이 회절격자 주기의 랜덤 변이가 카짐에 따라 감소하고, spatial hole-burning 효과는 정규화된 결합계수가 1.5보다 클 때에는 주는 데 반하여 작을 때에는 커진다.

  • PDF