• Journal of Mechanical Science and Technology
• /
• 제18권3호
• /
• pp.379-387
• /
• 2004

A novel flatness sensing system which is called the Flatness Sensing Inter-stand Looper(FlatSIL) system is suggested and a self-tuning PI control system using the FlatSIL is designed for improving the flatness of hot strip in finishing mill processes. The FlatSIL system measures the tension along the direction of the strip width by using segmented rolls, and the tension profile is approximated through the tension of each segmented roll. The flatness control system is operated by using the tension profile. The proposed flatness control system as far as the tension profile-measuring device works for the full strip length during the strip rolling in finishing mills. The generalized minimum variance self-tuning (GMV S-T) PI control method is applied to control the flatness of hot strip which has a design parameter as weighting factor for updating the PI gains. Optimizing the design parameter in the GMV S-T PI controller, the Robbins-Monro algorithm is used. It is shown by the computer simulation and experiment that the proposed GMV S-T PI flatness control system has better performance than the fixed PI flatness control system.

• Journal of Magnetics
• /
• 제15권2호
• /
• pp.74-77
• /
• 2010

This paper deals with optimum design criteria for maximum torque density & minimum torque ripple of a Flux Switching Motor (FSM) using response surface methodology (RSM) & finite element method (FEM). The focus of this paper is to find a design solution through the comparison of torque density and torque ripple which vary with rotor shape. And then, a central composite design (CCD) mixed resolution was introduced and analysis of variance (ANOVA) was conducted to determine the significance of the fitted regression model. The proposed procedure allows one to define the rotor dimensions, starting from an existing motor or a preliminary design.

• International Journal of Precision Engineering and Manufacturing
• /
• 제9권1호
• /
• pp.12-18
• /
• 2008

This paper describes two run-to-run controllers, a nonlinear multiple exponential-weight moving-average (NMEWMA) controller and a dynamic model-tuning minimum-variance (DMTMV) controller, for photolithography processes. The relationships between the input recipes (exposure dose and focus) and output variables (critical dimensions) were formed using an experimental design method, and the photolithography process model was built using a multiple regression analysis. Both the NMEWMA and DMTMV controllers could update the process model and obtain the optimal recipes for the next run. Quantified improvements were obtained from simulations and real photolithography processes.

• 응용통계연구
• /
• 제14권1호
• /
• pp.13-24
• /
• 2001

이중추출에서 모평균 추정방법을 고찰하였다. 전통적으로 널리 쓰이는 비추정량과 회귀추정량 그리고 비례배분 및 Rao 배분을 한 후의 층화평균에 대하여 주어진 기대 비용에서 최적의 표본수, 최소분산 및 분산추정량을 살펴보았다. 또한 비추정 및 층화의 효과를 모두 내포하는 결합비 추정량을 제안하고 주어진 기대 비용에서 최적의 표본수 및 최소분산을 유도하였고 분산추정량을 구하였다. 그리고 제한된 모의실험을 통하여 비추정량, 층화평균 및 결합비 추정량의 효율을 비교하였다. 모의실험 결과 비추정량과 층화평균은 경우에 따라 효율이 다르게 나타난 반면, 결합비 추정량은 대체로 두 방법보다 효율이 우수하게 나타나 결합비 추정량이 이중추출에 유용하게 쓰일 수 있음을 보였다.

• 전기학회논문지
• /
• 제59권3호
• /
• pp.549-554
• /
• 2010

This paper deals with optimum design criteria for maximum torque density & minimum torque ripple of Flux Switching Motor (FSM) using RSM & FEM. The focus of this paper is to find a design solution through the comparison of torque density and torque ripple according to rotor shape variations. And then, a central composite design(CCD) mixed resolution is introduced, and analysis of variance (ANOVA) is conducted to determine the significance of the fitted regression model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.414.1_415.1
• /
• 2009

This paper deals with optimum design criteria for maximum torque density & minimum torque ripple of Flux Switching Motor (FSM) using RSM & FEM. The focus of this paper is to find a design solution through the comparison of torque density and torque ripple according to rotor shape variations. And then, a central composite design(CCD) mixed resolution is introduced, and analysis of variance (ANOVA) is conducted to determine the significance of the fitted regression model.

• Journal of Positioning, Navigation, and Timing
• /
• 제8권1호
• /
• pp.19-29
• /
• 2019

This paper analyzes the design factors for GNSS anti-jamming receiver system in which the adaptive beamforming algorithm is applied in GNSS receiver system. The design analysis factors used in this paper are divided into three: antenna, beamforming algorithm, and operation environment. This paper analyzes the above three factors and presents numerical simulation results on antenna and beamforming algorithm.

• International journal of advanced smart convergence
• /
• 제8권1호
• /
• pp.106-112
• /
• 2019

Pulsation variance technique is blended the bumpy popple-sonance status of the brilliant-disparity understanding level (BDUL) on pulsation understanding gestalt. The understanding level condition by the pulsation understanding gestalt system is composed with the popple-sonance system. As to look for a two-node white-small dot of the brilliant situation, we are to take of the pulsation value with two-node white-small dot by the output signal. The concept of understanding level is composed the reference of brilliant-disparity level for variance signal by the pulsation sonance gestalt. Moreover indicating a bumpy variance of the BDUL of the maximum-minimum in terms of the popple-sonance gestalt, and pulsation two-node white-small dot sonance that was the a pulsation value of the far variance of the Pul-ug-FA-${\pi}_{MAX}$-MIN with $23.24{\pm}3.36units$, that was the a pulsation value of the convenient variance of the Pul-ug-CO-${\pi}_{MAX}$-MIN with $7.97{\pm}1.60units$, that was the a pulsation value of the flank variance of the Pul-ug-FL-${\pi}_{MAX}$-MIN with $3.02{\pm}0.47units$, that was the a pulsation value of the vicinage variance of the Pul-ug-VI-${\pi}_{MAX}$-MIN with $0.50{\pm}(-0.01)units$. The popple sonance will be to evaluate at the bumpy ability of the popple-sonance gestalt with two-node white-small dot by the pulsation understanding level on the BDUL that is indicated the brilliant-disparity gestalt by the understanding level system. We will be possible to suppress of a gestalt by the special signal and to utilize a pulsation data of popple sonance level by the popple understanding system.

• 한국통계학회:학술대회논문집
• /
• 한국통계학회 2003년도 추계 학술발표회 논문집
• /
• pp.123-130
• /
• 2003

We define a broad class of rotation designs whose monthly sample is balanced in interview time, level of recall, and rotation group, and whose rotation scheme is time-invariant. The necessary and sufficient conditions are obtained for such designs. Using these conditions, we derive a minimum variance unbiased generalized composite estimator (MVUGCE). To examine the existence of time-in-sample bias and recall bias, we also propose unbiased estimators and their variances. Numerical examples investigate the impacts of design gap, non-sampling error sources, and two types of correlations on the variance of MVUGCE.

• 품질경영학회지
• /
• 제22권4호
• /
• pp.1-12
• /
• 1994

각각의 설계인자들의 실험조건에서 얻어지는 특성치들의 분산은 평균에 영향을 받는다. 많은 경우에 평균이 커짐에 따라서 분산이 커지는 경향이 있다. 다구찌가 산포제어인자를 찾기 위해서 제시한 SN 비인 $(SN)_i$ = 10 log ($\bar{y}_{i}^{2}/s_{i}^{2}$) 은 분산이 평균의 제곱에 비례하여 커지는 경우이다. 그런데 분산이 평균의 제곱보다 더 느리게 또는 더 빠르게 커질 수도 있기 때문에 이 논문에서는 간단한 자료분석적 기법에 의해서 그 관계를 추측하여, 합당한 SN 비를 사용할 것을 제시하였고, 평균조정인자를 찾기위한 통계량인 감도 $(S)_i$ 의 통계적 성질들을 논의하였다.