• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1394-1397
• /
• 1995

In the hazardous areas where explosive gases, vapor or mists exist, electrical apparatus and installations must be of explosion-proof construction to prevent or limit the danger of the ignition of potentially explosive atmosphere. In Korea, nine types of protection have been specified in the government regulations at present: flameproof enclosure, pressurization, oil immersion, increased safety, intrinsic safety, non-incendive, sand filling, encapsulation, and special types. Among these types, the intrinsic safety has the construction which limit or by-pass igniting the electric energy using electronic devices. This type has lots of merits but at the same time requires a high-degree of technology. In this paper, we investigated several dominating factors which affect the minimum ignition energy: this energy plays a very important role in design and evaluation of the intrinsic safety type electrical apparatus. Eletrode material, which is one of the most important factors, was intensively studied for the five sorts of material(Al, Cd, Mg, Sn, and Zn) with performing experiment in a low-voltage inductive circuit using IEC-type spark apparatus. The experimental results show that the minimum ignition energy of electrode material is varied: highest in Cd and lowest in Sn. We also confirmed the effect of eletrode make-and-break speed and magnetic field magnitude.

• Journal of the Korean Society of Safety
• /
• v.25 no.5
• /
• pp.22-26
• /
• 2010

The ignitability(minimum ignition energy, MIE) of a suspended dust clouds is very important aspect of technical safety indices. This paper reported the experimental results dealing with the influence of discharge circuit on the MIE of a suspended dust clouds. The movement of a suspended dust clouds was also observed with the high speed camera. The Hartmann vertical-tube apparatus(MIKE-3) described in the international standard of IEC and Polypropylene (PP, 50% volume-average, D50: $761{\mu}m$) resin powders were used in this experiment. The following results were obtained: (1) the MIE of a suspended PP powder depended markedly on the discharge circuit; in other words, when a resistor was connected in series with the discharge sparking circuit(RC), the lowest value(31mJ) of MIE was obtained for a suspended PP powder comparison with the other circuits(C circuit; 370mJ or LC circuit; 71mJ). (2) the discharge duration time is more important than other factors with regard to MIE of a suspended PP powder.

• Journal of the Korean Society of Safety
• /
• v.22 no.1 s.79
• /
• pp.36-39
• /
• 2007

It is important to know Minimum Ignition Energy(MIE) of flammable materials for ignition hazard of chemical processes etc.. Currently a capacitor discharge is used mainly to measure the MIE. Then, it is impossible to control actively discharge energies and discharge time because the MIE measurement uses a high voltage capacitor and fixed capacitor. However, the control of discharge energy and discharge time will be convenient if self-sustain discharge is used. In this paper, we measured the MIE by self-sustain discharge of a pulse shape to propose the new measuring method of the MIE. AS a result, ignition energies are increased gradually as discharge duration time gets longer, and discharge current grows larger. Also, an arc discharge and a glow discharge occurred during the experimental period, and the ignition by glow discharges happened when discharge duration time was $90{\mu}s$, discharge current was 8A and 1A Especially, the MIE occurred the 0.05mm and 0.08mm of the gap distance between discharge electrode in the same discharge duration time.

• Journal of the Korean Chemical Society
• /
• v.8 no.2
• /
• pp.57-61
• /
• 1964

It was verified at Part Ⅰ of this investigation that there is a minimum wettability between molten iron and graphite, which was preliminarily coated with magnesium, and thus the spheroidization of graphite might have resulted from the lack of wettability between magnesium-adsorbed graphite and iron matrix. Being continued from the last work, the wettability between pure iron and graphite, coated with the various thickness of cerium, are measured at melting point of pure iron in vacuum and 200 mmHg argon gas atmosphere. The result indicates the presence of a minimum wettability at a critical thickness of cerium film as was proved in the case of magnesium. The experimental analysis shows that, the minimum wettability could be attributed entirely to a minimum work of adhesion between liquid iron and graphite at a critical concentration of cerium in the iron-graphite interface.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.4
• /
• pp.688-697
• /
• 2017

It is very difficult to solve mathematically the optimal control problem for non - linear mobile robots to move to target points with minimum energy related to velocity, acceleration and angular velocity in minimum time. This paper proposes a method to obtain optimal control gains with which mobile robots move with minimum energy related to velocity, acceleration and angular velocity in minimum time using genetic algorithms. Mobile robots are non - linear systems so that their optimal control gains depend on initial positions. Hence initial positions are divided into some partition points and optimal control gains are obtained at each partition point with genetical algorithms. These optimal control gains are used to train neural networks that generate proper control gains at arbitrary initial position. Finally computer simulation studies have been conducted to verify the effectiveness of the method proposed in this paper.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.5A
• /
• pp.466-473
• /
• 2010

Several protocols which are based on tree topology to guarantee the important metrics such as energy efficiency in sensor networks have been proposed. However, studies on the effect of topologies in sensor networks, where base node has a high mobility, are very few. In this paper, we propose a minimum Wiener index tree as a suitable topology to the wireless sensor networks with high mobile base node. The minimum Wiener index spanning tree problem which aims to find a tree with minimum Wiener index from a given weighted graph was proved to be NP-hard. We designed a branch and bound algorithm for this problem. To evaluate the performance of proposed tree, the comparisons with minimum spanning tree in terms of transmission distance, energy consumption during one round, and network lifetime was performed by simulations. Our proposed tree outperformed in transmission distance and energy efficiency but underperformed in lifetime.

• Journal of the Korean Vacuum Society
• /
• v.8 no.2
• /
• pp.102-110
• /
• 1999

The LIGA X-ray exposure step was modelled into three inequalities, by assuming that the X-ray energy attenuated within a resist is deposited only in the localized range of the resist. From these inequalities, equations for the minimum and maximum exposure times required for a good quality microstructure were obtained. Also, an equation for the thickness of an X-ray mask absorber was obtained from the exposure requirement of threshold dose deposition. The calculation method of the synchrotron radiation power from a synchrotron radiation source was introduced and applied to an X-ray exposure step. A power from a synchrotron radiation source was introduced and applied to an X-ray exposure step/ A power function of photon energy, approximating the attenuation length of the representative LIGA resist, PMMA, and the mean photon energy of the XZ-rays incident upon an X-ray mask absorber were applied to the above mentioned equations. Consequently, the tendencies of the minimum and maximum exposure and with respect to mean photon energy and thick ness of PMMA was obtained. Additionally, the tendencies of the necessary thickness of PMMA and photon energy of the X-ray mask absorber with respect to thickness of PMMA and photon energy of the X-rays incident upon an X-ray mask absorber were examined. The minimum exposure time increases monotonically with increasing mean photon energy for the same total power density and is not a function of the thickness of resist. The minimum exposure time increases with increasing mean photon energy for the same total power density in the case of the general LIGA process, where the thickness of PMMA is thinner than the attenuation length of PMMA. Additionally, the minimum exposure time increases monotonically with increasing thickness of PMMA. The maximally exposable thickness of resist is proportional to the attenuation length of the resist at the mean photon energy with its proportional constant of ln $(Dd_m/D_{dv})$. The necessary thickness of a gold X-ray mask absorber due to absorption edges of gold, increases smoothly with increasing PMMA thickness ratio, and is independent of the total power density itself. The simplicity of the derived equations has made clearly understandable the X-ray exposure phenomenon and the correlation among the exposure times, the attenuation coefficient and the thickness of an X-ray mask absorber, the attenuation coefficient and the thickness of the resist, and the synchrotron radiation power density.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2018.05a
• /
• pp.379-380
• /
• 2018

• 한국태양에너지학회:학술대회논문집
• /
• 2008.11a
• /
• pp.63-68
• /
• 2008

Efforts tp overcome the current challenge of global warming and abnormal temperature are being taken around the world. According to a report, average temperature of Korea has increased by about $0.8^{\circ}C$ for a century. In particular, temperature has rapidly increased since year 2000. Climate changes have brought remarkable changes in our lives. For example, agricultural field will see changes in crops and production. Energy used to maintain and manage architectures will be changed as well. In order to actively cope with rapidly changing global climate which drives changes from the basic behavior of our lives to subtle changes, international cooperation and researches are performed around the word. For instance, as a part of these global efforts, research on typical meterological data for computer simulation program to evaluate architecture energy performance is in progress in Korea. In order to conduct research on typical meterological data in format of data per time, reference regarding monthly maximum/minimum temperature time is required. Unfortunately, however, reference regarding maximum/minimum temperature time hasn't been defined in Korea. Therefore, this study aims to provide fundamental data essential for various researches by calculating maximum/minimum temperature time of major cities across Korea. According to the study, maximum temperature occurs at 3 p.m and minimum temperature occurs at 5 a.m or 6 a.m. respectively, in overall areas.

• Environmental Engineering Research
• /
• v.21 no.4
• /
• pp.409-419
• /
• 2016

As a major energy consumption province, the issue about the carbon emissions in Hebei Province, China has been concerned by the government. The carbon emissions can be effectively reduced due to a more rational energy consumption structure. Thus, in this paper the constraint of low carbon emissions is considered as a foundation and four energies--coal, petroleum, natural gas and electricity including wind power, nuclear power and hydro-power etc are selected as the main analysis objects of the adjustment of energy structure. This paper takes energy cost minimum and carbon trading cost minimum as the objective functions based on the economic growth, energy saving and emission reduction targets and constructs an optimization model of energy consumption structure. And empirical research about energy consumption structure optimization in 2015 and 2020 is carried out based on the energy consumption data in Hebei Province, China during the period 1995-2013, which indicates that the energy consumption in Hebei dominated by coal cannot be replaced in the next seven years, from 2014 to 2020, when the coal consumption proportion is still up to 85.93%. Finally, the corresponding policy suggestions are put forward, according to the results of the energy structure optimization in Hebei Province.