• Journal of KSNVE
• /
• v.8 no.6
• /
• pp.1030-1036
• /
• 1998

When the lateral dimensions of a duct is larger than or comparable to the wavelengths of Interest, higher order modes propagate in the duct. These modes will be radiated and produce noise. A number of sensors and actuators for control of radiating noise from the duct have to be incorporated with the number of modes which one wants to control. These considerations motivated the present study that considers a control system which has less microphones and control sources than required. In this work, by theoretical analysis, the control performance of such a kind of system is investigated in terms of sound-field variables and control system variables. The possible maximum and minimum value. mean and variance of residual acoustic potential energy are derived for the set of primary sound fields.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.9
• /
• pp.122-132
• /
• 1993

In this paper, a self tuning control algorithm is proposed for the high performance drive of DC servo motor, which is adequate to the servo system having frequent load variation. In order to realization of the algorithm, the control system is developed using a fixed point high speed digital signal processor. TMS320C25. Control algorithm is composed of two parts. One is estimation law part using recursive least mean square method, the other is control law part using minimum variance control method. For the purpose of easiness of applying adaptive algorithm, developed control system is based o PC-DSP structure which can develop, debug programs and monitor the dynamic behaviors,etc. Through computer simulation and experimental results, it was verified that proposed control system could estimate system parameters and was robust to the variation of the load and as a result, was adequate to the servo motor drives.

• Proceedings of the KIEE Conference
• /
• 2008.04a
• /
• pp.187-188
• /
• 2008

주기적으로 제어 성능을 평가하고, 평가 결과에 따라서 제어시스템의 제어기 상수를 최적화하거나 제어 밸브와 같은 제어기기의 문제점들을 사전에 개선하고자하는 노력이 있어왔다. 제어성능 평가방법은 제어목표 값에 대한 추종성을 평가하는 Set Point Analysis 방법을 주로 사용한다. 평가 지표는 Integral Absolute Error(IAE)와 같은 Error Integral 값과 Minimum Variance 방법이 실용적으로 사용된다. 본 논문에서는 평가 대상시스템으로 원자력발전소의 수위 제어시스템중 하나를 선정하고 Control Performance Assessment를 수행하였다. 이를 기반으로 대상 시스템의 제어모델링을 바탕으로 한 Minimum Integral Error를 만족하는 제어기 상수를 구하였으며 새로운 상수를 제어기에 설정한 후 다시 성능을 평가하였다. 평가 결과, 제어시스템의 제어 성능 평가 지표를 사용한 제어 루프의 평가와 예방 조치가 실제적으로 발전소의 안정적 운전에 유용하다는 것을 입증하였다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.11
• /
• pp.1076-1080
• /
• 2015

An inventory control system was developed for a distribution system consisting of a single multiproduct warehouse serving a set of customers and purchasing products from multiple vendors. Purchase orders requesting multiple products are delivered to the warehouse in a process. The receipt of customer orders by the warehouse proceeded in order intervals and in order quantities that are subject to random fluctuations. The objective of warehouse operation is to minimize the total cost while maintaining inventory levels within the warehouse capacity by adjusting the purchase order intervals and quantities. An adaptive model predictive control algorithm was developed using a periodic square wave model to represent the material flows. The adaptive concept incorporated a stabilized minimum variance control-type input calculation coupled with input/output stream parameter predictions. The effectiveness of the scheme was demonstrated using simulations.

• 제어로봇시스템학회:학술대회논문집
• /
• 1994.10a
• /
• pp.224-228
• /
• 1994

This paper deals with a Batch processor application to determine orbit trajectories from satellite tracking data. The purpose of this paper is to find the initial state vectors. In order to determine the better estimation process, several different cases are compared. Here we adapt a minimum variance concept to develop estimation and prediction techniques. These results are compared with by SEP, Spherical Error Probable, values.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.4
• /
• pp.355-361
• /
• 1992

In this paper, some rules for auto- tuning of feedback-feedforward controller in variable load and disturbance are presented. The parameters of feedback PID controller are determined by heuristic rules based on input regulation experiment, and the parameters of feedforward controller are determined by result rules based on spectral factorization, minimum variance, and polynomial equation. These heuristic and result rules are used as an element of the feedback loop in an auto-tuning feedback-feedforward controller. The robust and accurate control performance is demonstrated by computer simulation.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.425-426
• /
• 2008

발전소의 제어 시스템은 제어 기간이 길어짐에 따라 제어 기기의 운전 특성이 변화하므로 최초 설계 및 운전때의 성능과는 다른 제어 특성을 나타낸다. 따라서 주기적으로 제어 성능을 평가하고 평가 결과에 따라서 제어 기기의 성능 개선 작업과 제어 시스템의 제어기 상수 최적화 등의 작업을 통하여 제어 성능을 최적으로 유지하여 제어 목적을 달성하도록 하여야한다. 제어성능 평가기법은 제어 목표 값에 대한 추종성을 평가하는 Set Print Analysis 방법을 주로 사용한다. 평가 지표는 Integral Absolute Error(IAE)와 같은 Error Integral 값과 Minimum Variance방법이 실용적으로 사용된다. 본 논문에서는 Non-Minimum Phase 특성으로 인하여 초기 운전 모드에서 정상 운전 모듈로의 원활한 전환이 어려운 수위 제어 시스템에서 제어 전환을 위한 최적 제어기 상수를 구하기 위하여 CPA 방법을 적용하였다. 일반적으로 제어성 평가는 설정치 변화에 대한 추종성을 평가하지만 본 논문에서는 제어 전환 시의 제어성 평가를 통하여 최적의 제어 전환 상수를 구하고자 하였다. 적용 결과, CPA기법은 설정시 추종성뿐만 아니라 제어 과도에서의 제어 전환 변수의 주종성에 적용하여 제어 전환을 최적화하는데도 유용함을 확인하였다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.4
• /
• pp.264-274
• /
• 2003

This paper presents a direct generalized minimum-variance self tuning controller with a PID structure using neural network which adapts to the changing parameters of the nonlinear system with nonminimum phase behavior, noises and time delays. The self-tuning controller with a PID structure is a combination of the simple structure of a PID controller and the characteristics of a self-tuning controller that can adapt to changes in the environment. The self-tuning control effect is achieved through the RLS (recursive least square) algorithm at the parameter estimation stage as well as through the Robbins-Monro algorithm at the stage of optimizing the design parameter of the controller. The neural network control effect which compensates for nonlinear factor is obtained from the learning algorithm which the learning error between the filtered reference and the auxiliary output of plant becomes zero. Computer simulation has shown that the proposed method works effectively on the nonlinear nonminimum phase system with time delays and changed system parameter.

• Journal of Institute of Control, Robotics and Systems
• /
• v.2 no.2
• /
• pp.108-114
• /
• 1996

We present proofs of the stability and convergence of Self-organizing feature map (SOFM) neural network with time-invarient learning rate and binary reinforcement function. One of the major problems in Self-organizing feature map neural network concerns with learning rate-"Kalman Filter" gain in stochsatic control field which is monotone decreasing function and converges to 0 for satisfying minimum variance property. In this paper, we show that the stability and convergence of Self-organizing feature map neural network with time-invariant learning rate. The analysis of the proposed algorithm shows that the stability and convergence is guranteed with exponentially stable and weak convergence properties as well.s as well.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.12-15
• /
• 1988

A controller described in this paper is designed for implicit generalised minimum varience controller with variable time delays in which the weighting polynominals are calculated to reduce the output and control signals variances. This paper is based on the fact that the pole-assigment equation may have multiple solutions if the weighting polynominals are not of minimal order. It is shown that the larger order of the weighting polynominals increment the better is the stochastic behavior of the closed-loop system with variable time delays without changs in the deterministic behavior of the system. Based on this theory, the controller is applied to position control of a three-link manipulater with parameter uncertainty.