• 제목/요약/키워드: Minimum explosion concentration

검색결과 42건 처리시간 0.023초

Hydroxypropyl Methyl Cellulose의 분진 폭발특성에 관한 연구 (A Study on Dust Explosion Characteristics of Hydroxypropyl Methyl Cellulose)

  • 임우섭;목연수
    • 한국안전학회지
    • /
    • 제15권4호
    • /
    • pp.95-100
    • /
    • 2000
  • This study was performed in Hartmann type dust explosion apparatus in order to research the dust explosion characteristics of hydroxypropyl methyl cellulose(HPMC): minimum explosive limit, minimum ignition energy, limiting oxygen concentration, maximum explosion pressure, rate of pressure rise, etc. The samples of HPMC dust were distributed into 120-140 mesh, 170-230 mesh and 325 under, and the gap distance of the discharge electrode was setted up at 5mm. The experimental results were obtained as follows: (1) The minimum explosive limit for HPMC dust was founded at 180g/㎥. the minimum ignition energy at 9.8mJ and the limiting oxygen concentration at 12%. (2) The maximum explosion pressure of HPMC dust was $8.1kg/cm^2\;{\cdot}\;$abs at the concentration of $500g/m^3$ and the maximum rate of pressure rise was 203.98 bar/sec at the concentration of $480g/m^3$ for 325 under.

  • PDF

Terephtalic Acid의 폭발특성에 관한 실험적 연구 (An Experimental Study on Explosion Characteristics of Terephtalic Acid)

  • 오규형;문정기;김한석
    • 한국안전학회지
    • /
    • 제5권1호
    • /
    • pp.41-48
    • /
    • 1990
  • In this study the explosion characteristics of terephtalic acid dust(PTA) was investigated with the Hartmann type apparatus. The minimum ignition energy, minimum explosible concentration, flame propagation velocity, explosion pressure, explosion pressure rise rate and the effect of inert dust(talcum) on explosion characteristics were measured. Flame velocity was 50m/s at 700g/m$^3$ concentration, and the explosion pressure and explosion pressure rise rate were most likely with that of gas explosion. It was found that an inert dust acts as a heat sinker and it disturbs the combustion of flammable dust, as a result, explosion pressure and explosion pressure rise rate were decreased and minimum explosion concentration was increased with increasing the fraction of talcum dust in PTA.

  • PDF

표면열처리용 변성가스의 위험성에 관한 연구 (A Study on the Hazard of Converted Gas for Surface Heating Treatment)

  • 최재욱;민철웅;임우섭;이병철;김동규
    • 한국가스학회지
    • /
    • 제9권3호
    • /
    • pp.9-14
    • /
    • 2005
  • 변성가스의 폭발특성을 평가하기 위하여, 산소농도 변화와 수소의 첨가에 따른 변성가스 조성을 변화시켜 폭발거동에 대한 실험을 행하였다. 이러한 실험을 행한 결과 산소농도 $21\%$에서 변성가스와 수소의 농도가 증가할수록 폭발하한계는 낮아졌으며, 산소농도 $6\%$에서 폭발한계산소농도를 구하였다. 변성가스의 최대폭발압력은 $4.61 kg_f/cm^2$의 최적값을 얻었고, 이때 최대폭발압력상승속도는 변성가스 농도 $40\%$에서 $130.75 kg_f/cm^2/s$를 구하였다. 또한 폭발에 필요한 최소점화에너지는 변성가스 농도 $50\%$에서 0.13 mJ를 구하였다.

  • PDF

화력발전소용 석탄분진의 최소폭발농도와 폭발강도 평가 (An Evaluation of Minimum Explosible Concentration and Explosion Severity of Coal Dust in a Thermal Power Plant)

  • 윤여송;이근원
    • 한국가스학회지
    • /
    • 제27권4호
    • /
    • pp.62-69
    • /
    • 2023
  • 화력발전소용 석탄에 대한 연소기술의 발전과 원가절감을 위해 저급탄의 사용량이 지속적으로 증가하고 있다. 연소 시 수분에 의한 증발잠열 손실이 크고 탄을 저장하고 미분화하는 과정에서 자연발화와 분진의 폭발위험이 있다. 본 연구는 국내 D 발전사에서 채취한 석탄분진(coal powder)으로 Coal dust-fine, Coal dust-coarse, Wood pallet+organic dust 및 Wood chip 4종에 대한 최소폭발농도와 폭발강도를 비교 평가하였다. 석탄 분진의 최소폭발농도는 JIS Z 8818:2002에 따라 측정하였으며, 폭발강도는 Siwek 20 L Chamber Apparatus를 이용하여 ASTM E1226에 따라 실험을 실시하였다. 최소폭발농도 시험결과 coal dust-fine가 분진폭발 위험이 있는 것으로 나타났으며, wood chip의 분진농도 130 g/m3에서 폭발이 일어나므로 가장 낮은 분진농도에서 폭발의 위험이 있는 것을 알 수 있었다. 분진폭발 등급 기준에 따르면 Kst가 200 bar m/s 이하로 모든 시료가 폭발등급 St 1등급에 해당되며, 폭발의 위험성이 약한 분진으로 평가되었다.

반도체 공정에서 발생하는 혼합분진의 폭발 위험성평가 (Risk Assessment of Explosion of Mixed Dust Generated in Semiconductor Manufacturing)

  • 박창섭;김찬오
    • 전기학회논문지
    • /
    • 제67권3호
    • /
    • pp.474-478
    • /
    • 2018
  • The use of metals such as aluminum and titanium and the related industrial facilities have been continuously increasing to meet the requirements of the improvement of high-tech products due to the development of industry, and explosion of metal dust. Semiconductor process Metal dust is essential, but research is insufficient. The purpose of this study is to identify risk by analyzing the quantitative risk such as maximum explosion pressure and minimum explosion concentration applied international test standard in order to select the semiconductor process facilities handling dust and to predict possible risk of accidents.

사료분진의 폭발특성에 관한 연구 (A study of flour dust explosion)

  • 이홍주;우인성;홍현경;사민형;김윤선;황명환;황성민;박희철;이주엽
    • 대한안전경영과학회지
    • /
    • 제13권4호
    • /
    • pp.109-116
    • /
    • 2011
  • This study examined into property of flour dust explosion to get the basic data for safety of industry by protecting accident of dust explosion. The experiment was conducted to know the effect of distance between explodes in the experiment device, effect of flour dust concentration, effect of humidity, effect of explosion pressure to the dust concentration and effect of inactive substance additive. The study indicated that explosion was happened effectively at the optimum distance 100mm or less in inter-polar distance, and minimum ignition energy was measured at 6mm. The data of feed concentration to the probability of explosion showed that the smaller the particle diameter was, the larger probability of explosion was, and the higher the dust concentration was, the more increased the pressure of explosion was, but more than upper limit of dust concentration, then the explosion of pressure decreased. For the effect of humidity, the more it contained water, the more decreased the ignition energy of dust was, so increased minimum explosive concentration, and effective water content was minimum 10% or more. Inactive substance additive was effective in adding more than 15% CaCO3 and CaO as substance inhibiting dust explosion, in which CaCO3 was more effective than CaO. the analysis of the flame of dust explosion was performed by high-speed video camera, it showed the size of flame bacame smaller in order that sub feed, main feed, wheat powder. As a result, sub feed was expected to be less dangerous than others.

LP가스의 폭발 현상 및 화염전파에 관한 연구 (A Study on the Explosion Phenomenon and Flame Propagation of LP Gas)

  • 최재욱;이동훈;김태근;민철웅;임우섭;최병식
    • 한국가스학회지
    • /
    • 제11권2호통권35호
    • /
    • pp.65-70
    • /
    • 2007
  • LP 가스의 폭발현상 및 위험성을 평가하기 위하여, 산소농도변화와 LP 가스의 농도에 따른 혼합가스 조성을 변화시켜 실험을 행하였다. 산소농도 21%에서 LP 가스의 농도가 증가할수록 폭발하한계는 낮아졌으며, 최소산소농도(MOC, Minimum Oxygen Concentration)는 1.0 bar, 1.5 bar, 2.0 bar에서 각각 14.5%, 12.0%, 11.5%로 낮아졌다. 최대폭발압력은 압력이 증가할 경우 $6.46kg/cm^2,\;9.41kg/cm^2,\;13.49kg/cm^2$로 증가하였으며, LP 가스의 초기압력이 클수록 화염의 전파속도가 증가하였다.

  • PDF

산소농도와 압력 변화에 따른 도시가스의 폭발특성 (The Explosion Characteristics of City Gas on the Change of Oxygen Concentration and Pressure)

  • 최재욱;이인식;박성태
    • 한국가스학회지
    • /
    • 제9권1호
    • /
    • pp.38-43
    • /
    • 2005
  • 도시가스의 폭발특성을 평가하기 위하여, 산소의 농도와 초기압력의 변화에 따라 실험을 행하였다 이러한 실험을 행한 결과 산소농도가 낮아짐에 따라 폭발범위는 점차적으로 좁혀졌으며, 산소농도 $12\%$에서 폭발한계산소농도를 구하였다. 도시가스의 초기압력이 증가함에 따라 폭발하한계가 약간 증가하였다. 또한 초기압력이 $0{\~}1.0 kgf/cm^2{\cdot}g$로 변함에 따라 최대폭발압력은 $6.3 kgf/cm^2{\cdot}g,\;12.7 kgf/cm^2{\cdot}g$을 구하였으며, 최대폭발압력상승속도는 $245.63 kgf/cm^2/s,\;427.88 kgf/cm^2/s$를 구하였다.

  • PDF

테레프탈산의 분진 폭발특성에 관한 연구 (A Study on Explosion Characteristics of Terephthalic Acid)

  • 목연수;장성록
    • 한국안전학회지
    • /
    • 제15권1호
    • /
    • pp.121-125
    • /
    • 2000
  • This study was executed by dust explosion experiment of terephthalic acid which was widely used for various purposes of food packing material and film etc. and the demand was rapidly increasing. The particle size and concentration of dust affected the minimum ignition energy largely and the lean concentration and the minimum ignition energy in the range of this study were obtained 50$g/m^3$ and 19mJ respectively. Minimum ignition energy was shown at the 4 and 5mm gap distance of discharge electrode, and when the gap distance was below 2mm the explosion could not generated although the sufficient energy was given. It was also found that the ignition energy decreased linearly with the decreasing of dust mean particle size.

  • PDF

프로필렌의 공정안전 운전을 위한 CO2 첨가량에 따른 폭발범위 측정에 관한 연구 (A Study on the Measurement of Explosion Range by CO2 Addition for the Process Safety Operation of Propylene)

  • 최유정;허종만;김정훈;최재욱
    • 한국산학기술학회논문지
    • /
    • 제20권7호
    • /
    • pp.599-606
    • /
    • 2019
  • 위험물질에 의한 제조물을 취급하는 설비와 시설은 대부분 고온, 고압으로 공정을 운전을 한다. 이로 인해 화재폭발로 인한 위험성이 증대되고 있다. 특히, 폭발 사고는 석유 화학 가스설비 등 위험물 시설의 가장 주된 위험요인으로 작용하고 있으며, 그 중, 프로필렌은 석유화학 플랜트의 기초 원료 및 첨가 중합반응에 의한 합성물질을 제조하는 현장에서 많이 사용되고 있다. 산소농도의 변화에 대한 폭발범위를 구함으로써 프로필렌을 사용하는 사업장에서 발생 될 수 있는 폭발을 예방하기 위하여 불활성 가스인 $CO_2$를 이용하여 온도와 압력의 변화에 따라 산소농도의 변화에 대한 폭발범위를 구하였다. 온도는 $25^{\circ}C$, $100^{\circ}C$, $200^{\circ}C$로 변화시켜 측정하였으며, 용기 내 압력을 $1.0kgf/cm^2.G$, $1.5kgf/cm^2.G$, $2.0kgf/cm^2.G$, $2.5kgf/cm^2.G$$CO_2$를 가압시켜 측정하였다. 폭발한계는 온도, 압력 및 산소농도와 관계가 있으며, 온도와 압력이 높아질수록 최소산소농도는 낮아지고, 산소농도가 낮아질수록 폭발범위는 좁아졌다. 또한, 최소산소농도 이하의 농도에서는 프로필렌의 증기와 점화원이 존재하여도 폭발이 발생하지 않는 것을 알 수 있다.