• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.785-790
• /
• 2008

Vibration of a non-linear system under random parametric excitations was evaluated by probablistic methods. The non-linear characteristic terms of a system were quasi-linearized and excitation terms were remained as they were given. An analytical method where the square mean of error was minimized was ysed. An alternative method was an energy method where the damping energy and rstoring energy of the linearized system were equalized to those of the original non-linear system. The numerical results were compared with those obtained by Monte Carlo simulation. The comparison showed the results obtained by Monte Carlo simulation located between those by the analytical method and those by the energy method.

• 한국멀티미디어학회논문지
• /
• 제20권11호
• /
• pp.1793-1802
• /
• 2017

In the recent years, IT and Network Technology has rapidly advanced environment in accordance with the needs of the times, the usage of the smart learning service is increasing. Smart learning is extended from e-learning which is limited concept of space and place. This system can be easily exposed to the various security threats due to characteristic of wireless service system. Therefore, this paper proposes the improvement methods of smart learning system security by use of faults analysis methods such as the FTA(Fault Tree Analysis) and FMECA(Failure Mode Effects and Criticality Analysis) utilizing the consolidated analysis method which maximized advantage and minimized disadvantage of each technique.

• 한국정밀공학회지
• /
• 제23권7호
• /
• pp.168-176
• /
• 2006

Nowadays, Three dimensional printing (3DP) technique that is one of solid freeform fabrication (SFF) technology has been notable issue, and has been applied by various fields. The SFF system can fabricate three dimensional objects of solid freeform with high speed and low cost using ink jet printing technology. In this research, a SFF system to analyze 3DP process technology is developed. We applied sliding mode control with sliding perturbation observer (SMCSPO) algorithm and minimized position error to the developed SFF system. We analyzed and optimized process variables such as jetted volume, layer thickness, powder bed and so on experimentally. Also. the dimensional error of a developed SFF system is evaluated. Finally, the feasibility of application to bio manufacturing is presented through successful fabrication of teeth and cranium model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 F
• /
• pp.1973-1976
• /
• 1998

Recently, new trend in telecommunication device is to apply low voltage, about 3.3V-1.5V. However, it is undesirable in view of high efficiency and power desity which is the most important requirement in the distributed power system. Rectification loss in the output stage, in on-board converter for distributed power system are constrained to obtain high efficience at low output voltage power suppies. This paper explains the basic operational principles of three kinds of ZVS DC/DC converters with self-driven synchronous rectifier. The three topologies are analyzed by simulation and exprimentation, and the characteristics comparisons of high efficience converter are carried out in view of the minimized rectification losses in the out stage.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권3호
• /
• pp.165-172
• /
• 2003

This paper presents an operation scheme to enhance the power system security by applying FACTS on Power systems. Three main generic types of FACTS devices are suggested an illustrated. Flow congestions over lines have been solved by controlling active power of series-compensated FACTS devices and low voltages at buses have been solved by controlling reactive power of shunt-compensated FACTS devices. Especially, Especially, UPFC has been applied in both line congestion and low voltages. Two kinds of indices which indicate the power system security level related to line flow and bus voltage are utilized in this paper. They have been minimized to enhance the power system security level through the iterative method and the sensitivity vector of security index is derived to determine the direction to minimum. The proposed algorithm has been tested on the IEEE 57-bus system with FACTS devices in a normal condition and a line-faulted contingency.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.325-328
• /
• 2008

After insufficient road facilities are expanded, it is more important to maintain performance of road facilities the time according to passing. When the road facilities are maintained optimally through proper maintenance, the total amount of investment can be minimized and national competitiveness is improved. Individual maintenance research of road facilities such as PMS or BMS was in progress until currently, but it is difficult to joint ownership and share information between systems, and it is impossible to use as the decision-making. Therefore, Asset Management System for road facilities is enforced to solve the inefficiency of existing systems, maintenance the road facilities systematically under the limited budget and get the maximum benefits against the cost from the view point of long-term. In this paper, the concept of Asset Management System explained, and research plan from KICT in order to introduce the Asset Management System of road facilities from 2008 hereafter for 5 years accounted.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2006년도 학술발표회 논문집
• /
• pp.401-408
• /
• 2006

An optimum design method for hybrid control systems is proposed in this study. By considering both active and passive control systems as a combined or a hybrid system, the optimization of the hybrid system can be achieved simultaneously. In the proposed approach, we consider design parameters of active control devices and the elements of the feedback gain matrix as design variables for the active control system. Required quantity of the added dampers are also treated as design variables for the passive control system. In the proposed method, the cost of both active and passive control devices, the required control efforts and dynamic responses of a target structure are selected as objective functions to be minimized. To effectively address the multi-objective optimization problem, we adopt a preference-based optimization model and apply a genetic algorithm as a numerical searching technique. As an example to verify the validity of the proposed optimization technique, a wind-excited 20-storey building with hybrid control systems is used and the results are presented.

• 한국초전도ㆍ저온공학회논문지
• /
• 제21권2호
• /
• pp.15-21
• /
• 2019

In the mine exploration sites, sustainable treatment system of mine water with energy saving and minimized chemical additives is required. Since most of the mine water contains highly-concentrated ferrous ion, it is necessary to study on the removal method of iron ions. We propose the system consisting of two processes; precipitation process by air oxidation using solid catalyst-modified magnetite and separation process combining gravitational sedimentation and magnetic separation using a permanent magnet. Firstly, in the precipitation process (a former process of the system), we succeeded to prepare solid catalyst-modified magnetite. Air oxidation using solid catalyst-modified magnetite using $Fe_2(SO_4)_3$ as a starting material showed high iron removal capability. Secondly, in the separation process (latter process of the system), solid catalyst-modified magnetite using $Fe_2(SO_4)_3$ as a starting material can be separated by a superconducting bulk magnet and a permanent magnet.

• 국제학술발표논문집
• /
• The 1th International Conference on Construction Engineering and Project Management
• /
• pp.497-502
• /
• 2005

Needs of automation and computerization in the construction industry has been recognized but the implementation of e-business solutions with project management systems has not been fully explored. In order to cope with different management practices in home office and project sites, integration of two popular systems, Enterprise Resource Planning (ERP) and Project Management System (PMS) is essential. The objective of this study is to find ways to functionally and systematically integrate ERP and PMS. With the integration of ERP and PMS, a project will be managed much more efficiently and effectively. It is expected that this study will benefit system integrators and help them to understand construction management processes and integrate the solutions with minimized programming work.

• 산업경영시스템학회지
• /
• 제24권66호
• /
• pp.91-98
• /
• 2001

In this study, a heuristic for surface mounters is developed to find an efficient sequence on PCB and rack assignment by component grouping. As setting up 4 reels in a group, the distance of rack moving can be minimized. And then, a generalized model for N reels in a group is developed. It is found that the performance of this heuristic is better than other heuristics found in the literature. Throughout the simulation study, the suggested heuristic is performed about 8.2 ∼ 12% better than other heuristics.