• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.587-592
• /
• 2018

Because the brightness of an AMOLED is determined by the flowing current, each pixel of AMOLED operates via A current driving method. Therefore, it is necessary to supply power to adjust the amount of current according to THE user's requirement for AMOLED driving. In this study, an IP driver block was designed and a simulation was conducted for an AMOLED display, which supplies power as selected by users. The IP driver design focused on regulating the output power due to the OLED characteristics for the diode electric current according to the voltage to be activated by pulse-skipping mode (PSM) under low loads, and 1.5 MHz pulse-width modulation (PWM) for medium/high loads. The IP driver was designed to eliminate the ringing effects appearing from the dis-continue mode (DCM) of the step-up converter. The ringing effects destroy the power switch within the IC, or increase the EMI to the surrounding elements. The IP driver design minimized this through a ringing killer circuit. Mobile applications were considered to enable true shut-down capability by designing the standby current to fall below $1{\mu}A$ to disable it. The driver proposed in this paper can be applied effectively to the same system as the AMOLED display dual power management circuit.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.85-92
• /
• 2018

Reductions of the electricity charge are achieved by demand management of the load. The demand management method of the load using ESS involves peak shifting, which shifts from a high demand time to low demand time. By shifting the load, the peak load can be lowered and the energy charge can be saved. Electricity charges consist of the energy charge and the basic charge per contracted capacity. The energy charge and peak load are minimized by Linear Programming (LP) and Quadratic Programming (QP), respectively. On the other hand, each optimization method has its advantages and disadvantages. First, the LP cannot separate the efficiency of the ESS. To solve these problems, the charge and discharge efficiency of the ESS was separated by Mixed Integer Linear Programming (MILP). Nevertheless, both methods have the disadvantages that they must assume the reduction ratio of peak load. Therefore, QP was used to solve this problem. The next step was to optimize the formula combination of QP and LP to minimize the electricity charge. On the other hand, these two methods have disadvantages in that the charge and discharge efficiency of the ESS cannot be separated. This paper proposes an optimization method according to the situation by analyzing quantitatively the advantages and disadvantages of each optimization method.

• Journal of Environmental Science International
• /
• v.16 no.4
• /
• pp.449-458
• /
• 2007

Research results for the pressure drop variance depending on operation conditions such as change of inlet concentration, pulse interval, and face velocity, etc., in a pulse air jet-type bag filter show that while at $3kg/cm^2$ whose pulse pressure is low, it is good to make an pulse interval longer in order to form the first layer, it may not be applicable to industry because of a rapid increase in pressure. In addition, the change of inlet concentration contributes more to the increase of pressure drop than the pulse interval does. In order to reduce operation costs by minimizing filter drag of a filter bag at pulse pressure $5kg/cm^2$, the dust concentration should be minimized, and when the inlet dust loading is a lower concentration, the pulse interval in the operation should be less than 70 sec, but when inlet dust loading is a higher concentration, the pulse interval should be below 30 sec. In particular, in the case that inlet dust loading is a higher concentration, a high-pressure distribution is observed regardless of pulse pressure. This is because dust is accumulated continuously in the filter bag and makes it thicker as filtration time increases, and thus the pulse interval should be set to below 30 sec. If the equipment is operated at 1m/min of face velocity, while pressure drop is low, the bag filter becomes larger and thus, its economics are very low due to a large initial investment. Therefore, a face velocity of around 1.5 m/min is considered to be the optimal operation condition. At 1.5 m/min considered to be the most economical face velocity, if the pulse interval increases, since the amount of variation in filter drag is large, depending on the amount of inlet dust loading, the operation may be possible at a lower concentration when the pulse interval is 70 sec. However, for a higher concentration, either face velocity or pulse interval should be reduced.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.11
• /
• pp.1324-1333
• /
• 2010

In this paper, three kinds of beam coupling losses which occur in a quasi-optics circuit for millimeter wave receiver system have been intensively investigated. First, the beam coupling losses which are caused by mismatch of beam waists radii and their positions between those of one and the other have been evaluated. It shows that beam coupling losses due to mismatch of beam waists radii and their positions between two quasi-optics circuits can be minimized if beam waist radius is chosen as larger than 3 times the operation wavelength. Second, the beam coupling losses have been studied when the axis of propagation of one beam is tilted with respect to that of the other beam. It is noted that smaller beam waist radius results in greater tolerance to tilts and angular misalignments. Third, the beam coupling cases in which two beams are offset if their axes of propagation are parallel but one is displaced relative to the other have been investigated. It is confirmed that beam waists radii with larger than 3 times operation wavelength are less sensitive to lateral offsets.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.5
• /
• pp.109-119
• /
• 2017

In the present study, to determine walking imbalance using the walking analysis method, where limitations in the existing walking analysis have been minimized, we propose a new walking analysis method that adopts the following: self-developed equipment to measure the angles of left-right hip joints and knee joints; a determination system using symmetry index (SI); and dynamic time warping (DTW) similarity analysis algorithm to analyze individual walking styles. Normal and imbalanced walking tests were conducted for 12 subjects without walking disorder. From the SI calculation to determine imbalanced walking, both the normal and imbalanced walking styles can be determined using the angle measurements of the left-right hip joints and knee joints. In the analysis of the individual walking styles, the similarities at the center of the lower back, left-right thighs, and dorsum of the feet of the 12 subjects in both normal and imbalanced walking cases were compared. From the similarity analysis of the measured values during the normal and imbalanced walking tests, I determined that the walking pattern does not maintain the same stance when the body parts move during walking.

• Clinical and Experimental Reproductive Medicine
• /
• v.29 no.2
• /
• pp.105-115
• /
• 2002

Objective : To evaluate the effects of the reactive oxygen species (ROS) generated with a xanthine (X) and xanthine oxidase (XO) system on sperm function, the change of sperm characteristics, lipid peroxidation, and DNA fragmentation in bovine spermatozoa. Materials and Methods: ROS were produced using a combination of 1000 uM X and 50 mU/ml XO. The ROS scavengers: superoxide dismu tase (SOD) (200 U/ml) and catalase (500 U/ml) were also tested. Spermatozoa were incubated for 2 hours in BWW medium with a combination of X-XO supplemented with or without ROS scavengers at $37^{circ}C$ under 5% $CO_2$ incubator. Sperm movement characteristics by CASA (computer-aided sperm analysis), HOST (hypoosmotic swelling test), Caionophore induced acrosome reaction, malondialdehyde formation for the analysis of lipid peroxidation, the percentage of DNA fragmentation using the method of TdT-mediated nick end labelling (TUNEL) by flow cytometry were determined after 2 hours incubation. Results: The action of ROS on bovine spermatozoa resulted in a decreased in capacity for sperm motility, Ca-ionophore induced acrosome reaction and membrane integrity, an increased in malondialdehyde formation and the percentage of sperm with DNA fragmentation. In the effects of antioxidant, catalase completely alleviated the toxic effects induced by the ROS in terms of sperm function and characteristics, however SOD exhibited no capacity to reduce the toxic effects. Conclusion: The ROS can induce significant damages to sperm functions and characteristics. The useful ROS scavengers can minimized the defects of sperm function and various damages of spermatozoa.

• Korean Journal of Optics and Photonics
• /
• v.10 no.6
• /
• pp.500-506
• /
• 1999

We designed and fabricated a bidirectional optical transceiver module for low cost access network. An integrated chip forming a pin-PD on an 1.3 urn FP-LD was assembled by flip-chip bonding on a Si optical bench, a single mode fiber with an angled end facet was aligned passively with the integrated chip on V-groove of Si-optical bench. Gaussian beam theory was applied to evaluate the coupling coefficients as a function of some parameters such as alignment distance, angle of fiber end facet, vertical alignment error. The theory is also used to search the bottle-neck between transmittance and receiving coupling efficiency in the bi-directional optical system. Tn this paper, we confirmed that reduction of coupling efficiency by the vertical alignment error between laser beam and fiber core axis can be compensated by controlling the fiber facet angle. In the fabrication of sub-module, a'||'&'||' we made such that the fiber facet have a corn shape with an angled facet only core part, the reflection of transmitted laser beam from the fiber facet could be minimized below -35 dE in alignment distance of 2: 30 /J.m. In the same condition, transmitted output power of -12.1 dEm and responsivity of 0.2. AIW were obtained.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.4
• /
• pp.255-267
• /
• 2004

This study was conducted in order to improvement of fishing gear and fishing operating system for anchovy boat seine by bag net A-type and B-type was attached with half size modified nets. Field experiments were carried out observe geometry of nets by catcher boats. The obtained results are summarized as follows : The actual ratio of net opening in each part of the half size modified nets was increased from fore part to back part of the nets as shown the smallest value about 20% in wing net and the biggest value about 110% in bag net. In addition, vertical net opening of B-type net as measured as 10.9~11.8m in fore bag net and 5.8~8.0m in after bag net were 1~2m greater than 9.0~13.6m of A-type one, and 2~3m less than 9.3~10.4m of A-type one, respectively. Vertical net opening of half size modified net was shown as less variation of towing depth from wing net to inside wing net than those of traditional nets due to stable vertical performance. The mesh distortion or drift and variation of vertical net opening were decreased by improvement of bag nets in order to minimized shape of net pocket phenomenon whenever towing speed is slow. Bag net B-Type attached with dual flapper was shown as less variation in width of bag net and less escapement of anchovy.

• Korean Journal of Social Welfare
• /
• v.39
• /
• pp.128-156
• /
• 1999

Community Service Order is a program that holds a significant place in the system of probation. With its important role in the probation, there is an equally high expectation of the intervention from the program among the people which it serves. The problem lies in that people's understanding of the program is minimized to merely a volunteer-based social activity, which cause a division on how the program is to be run. The purpose of this research is to come up with a method that can efficiently organize the administrative plan to maximize its potentiality of the program. To adopt such a plan, "Sentencing to Service," an effective community service order program in Minnesota, U. S. A. was examined. An interview with the administrative staff, as well as a survey, using systematic sampling, with the participants was conducted to study the effective process and intervention of the program that has existed for fifteen years. The result concluded that "Sentencing to Service" is a successful program with the components of success being that of a positive support from the local community and high motivation level of the participants. In order for the program to be a positive experience for the participants, it is highly contingent upon the crew leaders. On the basis of the research findings, the following suggestions are made. First, a structured guideline for those who are involved in the program is necessary. Second, thorough training provided for the crew leaders are required and a social worker is recommended for the position of crew leader. Lastly, Community Service Order should not widen the net, but ought to serve as an alternative to incarceration.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.9
• /
• pp.1247-1255
• /
• 2016

Heparin binding proteins (HBPs) are produced by accessory glands. These are secreted into the seminal fluid, bind to the spermatozoa at the time of ejaculation, favour capacitation, acrosome reaction, and alter the immune system response toward the sperm. The present study was conducted with an objective to assess the effect of purified seminal plasma-HBPs (SP-HBPs) on cross bred cattle bull sperm attributes during two phases of cryopreservation: Pre freezing and freezing-thawing. SP-HBPs were purified from pooled seminal plasma by heparin affinity chromatography. Three doses of SP-HBPs i.e. 10, 20, $40{\mu}g/mLs$ semen were standardized to find out the optimum dose and $20{\mu}g/mLs$ was found to be an optimum dose. Semen as such and treated with SP-HBPs was diluted with sodium citrate-egg yolk diluter and cryopreserved as per the standard protocol. Sperm parameters i.e. motility, viability, Hypo-osmotic swelling test (HOST), acrosome damage, in vitro capacitation and lipid peroxidation were evaluated in SP-HBP treated and untreated (control) semen at both phases of cryopreservation. A considerable variation in percent sperm motility, viability, membrane integrity (HOST), acrosome damage, acrosome reaction and lipid peroxidation was observed at both phases among the bulls irrespective of the treatment. Incubation of neat semen with $20{\mu}g/mL$ SP-HBP before processing for cryopreservation enhanced the average motility, viability, membrane integrity by 7.2%, 1.5%, 7.9%, and 5.6%, 6.6%, 7.4% in pre-frozen and frozen-thawed semen in comparison to control. There was also an average increase of 4.1%/3.9% in in vitro capacitation and acrosome reaction in SP-HBPs-treated frozen-thawed semen as compared to control. However, binding of SP-HBPs to the sperm declined acrosome damage and lipid peroxidation by 1.3%/4.1% and 22.1/$32.7{\mu}M$/$10^9$ spermatozoa in SP-HBP treated pre-frozen/frozen-thawed semen as compared to control, respectively. Significant (p<0.05) effects were observed only in motility, HOST and in vitro acrosome reaction. It can be concluded that treatment of neat semen with SP-HBPs before cryopreservation minimized the cryoinjury by decreasing the generation of reactive oxygen species.